All installation and configuration problems and questions
Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N
by raloheni » Wed May 28, 2014 9:37 am
Hi
my spec
VERSION: 2.8-431a | BUILD: 140314-1134 | Vicidial from scratch in centos 6.5 - ray-solomon guide| no telephony cards | quad core server 8gb ram
i configured Voicebroadcast campaign with remote agents as said in vicidial manager manual
Only one remote agent and dial ration : 1
the systems is dialling perfect
but once i get SIP response of 503 service unavailable the vicidial stops dial for some minutes . and starts dial after some minutes.
is there any reason or settings to over come this isssue
-
raloheni
-
- Posts: 138
- Joined: Sun Apr 25, 2010 4:23 pm
by raloheni » Wed May 28, 2014 9:43 am
heres the cli which show 3min for next call
[May 28 20:09:58] -- Called trunk/44XXXXXXXXXX
[May 28 20:09:59] -- Got SIP response 503 "Service Unavailable" back from XX.XX.XX.XX
[May 28 20:09:59] -- SIP/voiptrunk-00000325 is circuit-busy
[May 28 20:09:59] == Everyone is busy/congested at this time (1:0/1/0)
......................
.....................
[May 28 20:11:14] -- Executing [9XXXXXXXXXX@default:1]
-
raloheni
-
- Posts: 138
- Joined: Sun Apr 25, 2010 4:23 pm
by geoff3dmg » Thu May 29, 2014 6:17 am
How many channels do you have allocated from your carrier and how many are you trying to use concurrently?
Vicibox 5.03 from .iso | VERSION: 2.10-451a BUILD: 140902-0816 | Asterisk 1.8.28.2-vici | Multi-Server | Amfeltec H/W Timing Cards | No Extra Software After Installation | Dell PowerEdge 1850 | Pentium 4 'Prescott' Xenon Quad @ 3.40GHz
-
geoff3dmg
-
- Posts: 403
- Joined: Tue Jan 29, 2013 4:35 am
- Location: Lancashire, UK
-
by raloheni » Thu May 29, 2014 11:45 pm
i have more than 10 channels
and dialling only 1 simultaneous call...
-
raloheni
-
- Posts: 138
- Joined: Sun Apr 25, 2010 4:23 pm
by geoff3dmg » Mon Jun 02, 2014 2:53 am
Then you need to contact your carrier and ask them why they are rejecting your INVITE requests.
Vicibox 5.03 from .iso | VERSION: 2.10-451a BUILD: 140902-0816 | Asterisk 1.8.28.2-vici | Multi-Server | Amfeltec H/W Timing Cards | No Extra Software After Installation | Dell PowerEdge 1850 | Pentium 4 'Prescott' Xenon Quad @ 3.40GHz
-
geoff3dmg
-
- Posts: 403
- Joined: Tue Jan 29, 2013 4:35 am
- Location: Lancashire, UK
-
Return to Support
Who is online
Users browsing this forum: No registered users and 113 guests