trunkinbound issue

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

trunkinbound issue

Postby attila.szabo » Thu Nov 27, 2014 11:05 am

Hi all,

I have installed the latest vicibox on one server as a test.
Added CARRIER and tested outgoing calls. Made some calls, oll ok
Added DID 441xxxxxx88 and directed it to a phone.

When the incoming call hits the server I have error message:
Code: Select all
NOTICE[3080]: chan_sip.c:23691 handle_request_invite: Call from '441xxxxxx88' (ip-address:5060) to extension 's' rejected because extension not found in context 'trunkinbound'.


It must be a simple misstake, but I cant figure it out what is wrong.


I have configured CARRIER as fallows:

Account Entry:
Code: Select all
[UK-Calling]
type=friend
username=441xxxxxx88
secret=xvssssss1
host=prox???????com
insecure=port,invite
fromuser=441xxxxxx88
context=trunkinbound


Dialplan:
Code: Select all
exten => _90044.,1,AGI(agi://127.0.0.1:4577/call_log)  remove spaces
exten => _90044.,2,Dial(${TRUNK}/0${EXTEN:5},,To)
exten => _90044.,3,Hangup

exten => _0044XX.,1,AGI(agi://127.0.0.1:4577/call_log)  remove spaces
exten => _0044XX.,2,Dial(${TRUNK}/0${EXTEN:4},,To)
exten => _0044XX.,3,Hangup

exten => _XXXXXX.,1,AGI(agi://127.0.0.1:4577/call_log)  remove spaces
exten => _XXXXXX.,2,Dial(${TRUNK}/${EXTEN},,To)
exten => _XXXXXX.,3,Hangup

exten => _999,1,AGI(agi://127.0.0.1:4577/call_log)  remove spaces
exten => _999,2,Dial(${TRUNK}/${EXTEN},,To)
exten => _999,3,Hangup

exten => _112,1,AGI(agi://127.0.0.1:4577/call_log)  remove spaces
exten => _112,2,Dial(${TRUNK}/${EXTEN},,To)
exten => _112,3,Hangup
Before you ask: VERSION: 2.10-451a - BUILD: 140902-0816
attila.szabo
 
Posts: 9
Joined: Mon Nov 24, 2014 10:46 am

Re: trunkinbound issue

Postby striker » Fri Nov 28, 2014 1:17 am

what you have set at Registring string in carrier?
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: trunkinbound issue

Postby attila.szabo » Fri Nov 28, 2014 4:11 am

Registration string
Code: Select all
register => 44xxxxxx88:xvsssss1@prox????????????com

Global string:
Code: Select all
TRUNK = SIP/UK-Calling
Before you ask: VERSION: 2.10-451a - BUILD: 140902-0816
attila.szabo
 
Posts: 9
Joined: Mon Nov 24, 2014 10:46 am

Re: trunkinbound issue

Postby striker » Fri Nov 28, 2014 11:23 pm

try the registring string as below and make a test call

register => 44xxxxxx88:xvsssss1@prox????????????com:5060/441xxxxxx88
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: trunkinbound issue

Postby attila.szabo » Mon Dec 01, 2014 4:15 am

You are a life saver. It works. Can you explain why, so I can understand.
Later I will have incoming numbers with different DID's will that be affected?
I will have 10 trunks with about 30 DIDs
Thnaks
Before you ask: VERSION: 2.10-451a - BUILD: 140902-0816
attila.szabo
 
Posts: 9
Joined: Mon Nov 24, 2014 10:46 am


Return to Support

Who is online

Users browsing this forum: No registered users and 101 guests