vicidial.org

by **THUFIR** » Fri Mar 27, 2015 1:44 pm

I have a tome,

Asterisk, the Definitive Guide

, and don't mind reading it. I'll go back and review the sections on creating a dialplan. The carrier suggests breaking the entry into incoming and outgoing, so I want to go along with this suggestion.

Obviously, I don't want to be using

Code: Select all: TESTSIPTRUNK

with a real carrier, that should be

Code: Select all: BABYTEL

, of course.

instead of 1,2,3, shouldn't the lines be 1,n,n? Next?

I just want to make sure that for the outbound dial plan, the most critical portion, that's the carrier entry which the below dialpan would be associated with?

Both the inbound and outbound should have, or rather, share, the same

Code: Select all: Global String

?

The part which I particularly struggle with is:

Code: Select all: MariaDB [asterisk]> MariaDB [asterisk]> select dialplan_entry from vicidial_server_carriers where carrier_name like 'babytel'; +------------------------------------------------------------------------------------------------------------------------------------------------------------+ | dialplan_entry | +------------------------------------------------------------------------------------------------------------------------------------------------------------+ | exten => _91999NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log) exten => _91999NXXXXXX,2,Dial(${TESTSIPTRUNK}/${EXTEN:2},,To) exten => _91999NXXXXXX,3,Hangup | +------------------------------------------------------------------------------------------------------------------------------------------------------------+ 1 row in set (0.00 sec) MariaDB [asterisk]>

Code: Select all: linux-k7qk*CLI> linux-k7qk*CLI> sip show peers Name/username Host Dyn Forcerport ACL Port Status 201/201 192.168.0.15 D N 58792 OK (281 ms) 202/202 192.168.0.15 D N 58792 OK (200 ms) babytel/1234567890 198.38.7.34 N 5065 Unmonitored gs102/gs102 (Unspecified) D N 0 UNKNOWN 4 sip peers [Monitored: 2 online, 1 offline Unmonitored: 1 online, 0 offline] linux-k7qk*CLI> linux-k7qk*CLI> sip show peer babytel * Name : babytel Secret : <Set> MD5Secret : <Not set> Remote Secret: <Not set> Context : trunkinbound Subscr.Cont. : <Not set> Language : en AMA flags : Unknown Netborder CPD: No Transfer mode: open CallingPres : Presentation Allowed, Not Screened Callgroup : Pickupgroup : MOH Suggest : default Mailbox : VM Extension : asterisk LastMsgsSent : 32767/65535 Call limit : 0 Max forwards : 0 Dynamic : No Callerid : "" <> MaxCallBR : 384 kbps Expire : -1 Insecure : invite Force rport : Yes ACL : No DirectMedACL : No T.38 support : No T.38 EC mode : Unknown T.38 MaxDtgrm: 4294967295 DirectMedia : No PromiscRedir : No User=Phone : No Video Support: No Text Support : No Ign SDP ver : No Trust RPID : No Send RPID : Yes TrustIDOutbnd: Legacy Subscriptions: Yes Overlap dial : No Outb. proxy : nat5.babytel.ca DTMFmode : rfc2833 Timer T1 : 500 Timer B : 32000 ToHost : nat5.babytel.ca Addr->IP : 198.38.7.34:5065 Defaddr->IP : (null) Prim.Transp. : UDP Allowed.Trsp : UDP Def. Username: 1234567890 SIP Options : (none) Codecs : 0x6 (gsm|ulaw) Codec Order : (ulaw:20,gsm:20) Auto-Framing : No Status : Unmonitored Useragent : Reg. Contact : Qualify Freq : 60000 ms Sess-Timers : Accept Sess-Refresh : uas Sess-Expires : 1800 secs Min-Sess : 90 secs RTP Engine : asterisk Parkinglot : Use Reason : No Encryption : No linux-k7qk*CLI> linux-k7qk*CLI> exit linux-k7qk:~ # linux-k7qk:~ # linux-k7qk:~ # linux-k7qk:~ # cat /etc/asterisk/sip-vicidial.conf ; WARNING- THIS FILE IS AUTO-GENERATED BY VICIDIAL, ANY EDITS YOU MAKE WILL BE LOST register => 16046289850@sip.babytel.ca:4rszUyk9:16046289850@nat5.babytel.ca:5065/16046289850 ; VICIDIAL Carrier: BABYTEL - babytel ; some carrier [babytel] type=peer qualify=no insecure=no host=nat5.babytel.ca port=5065 username=1234567890 host=nat5.babytel.ca outboundproxy=nat5.babytel.ca:5065 secret=gdsndshdsdsjklvds54534nhjkf canreinvite=no insecure=invite [201] username=201 secret=password accountcode=201 callerid="jitsi201" <201> mailbox=201 context=default type=friend host=dynamic [202] username=202 secret=password accountcode=202 callerid="jitsi202" <202> mailbox=202 context=default type=friend host=dynamic [gs102] username=gs102 secret=EfTj2JWuQBxC33h accountcode=gs102 callerid="Test Admin Phone" <> mailbox=102 context=default type=friend host=dynamic ; END OF FILE Last Forced System Reload: 2015-03-20 07:27:40 linux-k7qk:~ # linux-k7qk:~ #

The full configuration:

Code: Select all: linux-k7qk*CLI> linux-k7qk*CLI> sip show peers Name/username Host Dyn Forcerport ACL Port Status 201/201 192.168.0.15 D N 58792 OK (281 ms) 202/202 192.168.0.15 D N 58792 OK (200 ms) babytel/1234567890 198.38.7.34 N 5065 Unmonitored gs102/gs102 (Unspecified) D N 0 UNKNOWN 4 sip peers [Monitored: 2 online, 1 offline Unmonitored: 1 online, 0 offline] linux-k7qk*CLI> linux-k7qk*CLI> sip show peer babytel * Name : babytel Secret : <Set> MD5Secret : <Not set> Remote Secret: <Not set> Context : trunkinbound Subscr.Cont. : <Not set> Language : en AMA flags : Unknown Netborder CPD: No Transfer mode: open CallingPres : Presentation Allowed, Not Screened Callgroup : Pickupgroup : MOH Suggest : default Mailbox : VM Extension : asterisk LastMsgsSent : 32767/65535 Call limit : 0 Max forwards : 0 Dynamic : No Callerid : "" <> MaxCallBR : 384 kbps Expire : -1 Insecure : invite Force rport : Yes ACL : No DirectMedACL : No T.38 support : No T.38 EC mode : Unknown T.38 MaxDtgrm: 4294967295 DirectMedia : No PromiscRedir : No User=Phone : No Video Support: No Text Support : No Ign SDP ver : No Trust RPID : No Send RPID : Yes TrustIDOutbnd: Legacy Subscriptions: Yes Overlap dial : No Outb. proxy : nat5.babytel.ca DTMFmode : rfc2833 Timer T1 : 500 Timer B : 32000 ToHost : nat5.babytel.ca Addr->IP : 198.38.7.34:5065 Defaddr->IP : (null) Prim.Transp. : UDP Allowed.Trsp : UDP Def. Username: 1234567890 SIP Options : (none) Codecs : 0x6 (gsm|ulaw) Codec Order : (ulaw:20,gsm:20) Auto-Framing : No Status : Unmonitored Useragent : Reg. Contact : Qualify Freq : 60000 ms Sess-Timers : Accept Sess-Refresh : uas Sess-Expires : 1800 secs Min-Sess : 90 secs RTP Engine : asterisk Parkinglot : Use Reason : No Encryption : No linux-k7qk*CLI> linux-k7qk*CLI> exit linux-k7qk:~ # linux-k7qk:~ # linux-k7qk:~ # linux-k7qk:~ # cat /etc/asterisk/sip-vicidial.conf ; WARNING- THIS FILE IS AUTO-GENERATED BY VICIDIAL, ANY EDITS YOU MAKE WILL BE LOST register => 1234567890@sip.babytel.ca:gfdgfg54654gfnfgn:1234567890@nat5.babytel.ca:5065/1234567890 ; VICIDIAL Carrier: BABYTEL - babytel ; some carrier [babytel] type=peer qualify=no insecure=no host=nat5.babytel.ca port=5065 username=1234567890 host=nat5.babytel.ca outboundproxy=nat5.babytel.ca:5065 secret=gdsndshdsdsjklvds54534nhjkf canreinvite=no insecure=invite [201] username=201 secret=password accountcode=201 callerid="jitsi201" <201> mailbox=201 context=default type=friend host=dynamic [202] username=202 secret=password accountcode=202 callerid="jitsi202" <202> mailbox=202 context=default type=friend host=dynamic [gs102] username=gs102 secret=EfTj2JWuQBxC33h accountcode=gs102 callerid="Test Admin Phone" <> mailbox=102 context=default type=friend host=dynamic ; END OF FILE Last Forced System Reload: 2015-03-20 07:27:40 linux-k7qk:~ # linux-k7qk:~ #

by **okli** » Tue Mar 31, 2015 4:38 am

instead of 1,2,3, shouldn't the lines be 1,n,n? Next?

Both are allowed, the latter syntax is more flexible when you add new lines, however, you won't be doing so for vicidial, at least not often.

Both the inbound and outbound should have, or rather, share, the same

You do not need global string for inbound, since all calls are dumped in the same context where AGI script takes care.
For the outbound part it's just for convenience and maybe not displaying account details in CLI (cannot confirm that, never tested it) - rather than using :

Code: Select all: exten => _91999NXXXXXX,2,Dial(SIP/USER:PASSWORD@HOST/${EXTEN:2},,To)

or whatever, you use:

Code: Select all: myglobalstring=SIP/USER:PASSWORD@HOST or myglobalstring=SIP/accountentry exten => _91999NXXXXXX,2,Dial(${myglobalstring}/${EXTEN:2},,To)

where accountentry is the peer created, like:

Code: Select all: [accountentry] username=... secret=... type=peer host=....

By the way, all this is well covered in the book you mentioned and is pure asterisk question, not vicidial one.

by **THUFIR** » Wed Apr 01, 2015 3:04 pm

okli wrote:
instead of 1,2,3, shouldn't the lines be 1,n,n? Next?
Both are allowed, the latter syntax is more flexible when you add new lines, however, you won't be doing so for vicidial, at least not often.

Both the inbound and outbound should have, or rather, share, the same
You do not need global string for inbound, since all calls are dumped in the same context where AGI script takes care.
For the outbound part it's just for convenience and maybe not displaying account details in CLI (cannot confirm that, never tested it) - rather than using :
Code: Select all
exten => _91999NXXXXXX,2,Dial(SIP/USER:PASSWORD@HOST/${EXTEN:2},,To)
or whatever, you use:
Code: Select all
myglobalstring=SIP/USER:PASSWORD@HOST or myglobalstring=SIP/accountentry exten => _91999NXXXXXX,2,Dial(${myglobalstring}/${EXTEN:2},,To)
where accountentry is the peer created, like:
Code: Select all
[accountentry] username=... secret=... type=peer host=....

By the way, all this is well covered in the book you mentioned and is pure asterisk question, not vicidial one.

Admittedly, I don't understand the Asterisk language, didn't even realize it was its own language until just a few days ago.

When you say "inbound" what is that in relation to? The agent is only receiving SIP calls from vicidial, so those are inbound calls from that perspective. Of course, they're outbound dialing calls. Can you expand just a little on that?

by **okli** » Thu Apr 02, 2015 4:12 am

Admittedly, I don't understand the Asterisk language, didn't even realize it was its own language until just a few days ago.

Umm.., you didn't expect it to speak French, or SQL, or C#, right?

When you say "inbound" what is that in relation to?

Inbound from outside world/provider, not internal for asterisk in-out calls.

vicidial.org

dialplan_entry for a carrier (outbound)

dialplan_entry for a carrier (outbound)

Re: dialplan_entry for a carrier (outbound)

Re: dialplan_entry for a carrier (outbound)

Re: dialplan_entry for a carrier (outbound)

Who is online