Configuration for outbound using voipprocom

[totres]

Hello to all!
I'm having an issue calling in outbound:

Code: Select all

call from '028888' to extension '0039347XXXXXXX' rejected because extension not found in context 'default'

.

These are my carrier entries

Registration string

Code: Select all

register => user:pass@myprovider:port/user

Account entry

Code: Select all

[voip]
disallow=all
allow=g729
allow=alaw
allow=gsm
allow=ulaw
type=friend
dtmfmode=rfc2833
context=trunkinbound
qualify=yes
insecure=very
nat=yes
host=myprovider
username=user
secret=pass
fromuser=user

Dialplan entry

Code: Select all

exten => _39XX.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _39XX.,2,Dial(SIP/voip/${EXTEN:2},,tTo)
exten => _39XX.,3,Hangup

Vicidial: VERSION: 2.12-491a BUILD: 150610-0934

Am I missing something?

[williamconley]

Yep, you're missing the Installation Method with Version.

Additionally, you're fairly new at Asterisk, so here's your problem today:

0039347XXXXXXX

vs

exten => _39XX.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _39XX.,2,Dial(SIP/voip/${EXTEN:2},,tTo)
exten => _39XX.,3,Hangup

Your extension starts with "003". But your carrier pattern entry ("_" at the beginning means "pattern", so X can equal any number and "." can equal an unlimited number of additional numbers) only allows "39XX". Or "39 plus any two digits ... plus any number of More Digits. Note that the carrier entry does not start with 00 nor does it start with "XX" which would be a pattern match for "00" and also work. So the restriction you've placed on your dialplan is: Must begin with 39.

Thus the system did precisely what it was told to do: Allow numbers starting with 39 and NOT numbers starting with 00.

Happy hunting!

PS: Good details in the post except the missing installer info ...

[totres]

Thanks for Your reply.

Installation method ViciBox 6.03 - preload - Express install.

I changed the pattern to

Code: Select all

exten => _0039.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _0039.,2,Dial(SIP/voip/${EXTEN:4},,tTo)
exten => _0039.,3,Hangup

but the result is always rejected, dialing a number like "00393471111111"

[totres]

Solved

I just changed the carrier id to match the account settings name, in my case

Code: Select all

[voip]

.

[williamconley]

Solved

I just changed the carrier id to match the account settings name, in my case

Code: Select all

[voip]

.

In other words, you changed the dialplan entry, and then got a different rejection reason. Then researched the new rejection reason and "figured it out". Good Job. (Next time, post the New Rejection Reason ... if not for yourself, for the next guy! Everyone who comes here can use that extra little bit of detail!)