Can't access Web log in, when typing dialler's in address.

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Can't access Web log in, when typing dialler's in address.

Postby dailafing » Sun Sep 27, 2015 6:50 pm

I recently plugged in a dialler I made about 2 years ago.

Was set up perfectly, worked a treat.

But switched it on to get my carrier settings for a new dialler, and it's as though there's nothing on the network, chrome says there's no such page...

I'm expecting the "please wait while I redirect you" Message. ..

But I can ssh and winscp just fine...

And the server loads up otherwise as expected.

Any ideas? Thanks...

Edit:
The only thing I want from the dialler is my carrier settings.
I've got my original usr/pw, it's mainly the dial plan I need.
So when searching via winscp, I found that the extentions.confirm had a few defaulty-looking ones, but I did a ctrl-f search for the word orbtalk, my username, and my pw separately, hoping it would take me to "my" dial plan. But the text want there.
I 'know' this machine, I set it up... it's literally never been used since I provisioned it, and I made successful calls on it...
So confused...
ViciBox Redux v5.0.2-130821
Asterisk v.1.8.230.-vici
-Please feel free to message me about how to find out more version information, and how I may update to the latest. - I've no clue!
dailafing
 
Posts: 59
Joined: Wed Oct 23, 2013 1:25 pm
Location: UK, Wales

Re: Can't access Web log in, when typing dialler's in addres

Postby omarrodriguezt » Mon Sep 28, 2015 8:10 am

Confirm that the apache service is running
http://www.ITContinental.com
Dedicated USA Servers - Vicibox - Vicidial - Limesurvey - Vtiger CRM - More than 15 years experience - Hablamos Español
omarrodriguezt
 
Posts: 667
Joined: Fri Jun 05, 2009 12:22 pm
Location: Dominican Republic

Re: Can't access Web log in, when typing dialler's in addres

Postby dailafing » Mon Sep 28, 2015 9:18 am

I tried google, but I've no idea how to do that?
ViciBox Redux v5.0.2-130821
Asterisk v.1.8.230.-vici
-Please feel free to message me about how to find out more version information, and how I may update to the latest. - I've no clue!
dailafing
 
Posts: 59
Joined: Wed Oct 23, 2013 1:25 pm
Location: UK, Wales

Re: Can't access Web log in, when typing dialler's in addres

Postby omarrodriguezt » Mon Sep 28, 2015 10:05 am

http://www.ITContinental.com
Dedicated USA Servers - Vicibox - Vicidial - Limesurvey - Vtiger CRM - More than 15 years experience - Hablamos Español
omarrodriguezt
 
Posts: 667
Joined: Fri Jun 05, 2009 12:22 pm
Location: Dominican Republic

Re: Can't access Web log in, when typing dialler's in addres

Postby dailafing » Mon Sep 28, 2015 9:32 pm

omarrodriguezt wrote:http://bfy.tw/20vW

Haha.
Even those results were few and far between.
The codes I entered resulted in no output on my WPRKING dialler, and the one I'm trying to recover.
It was as though I had just hit return for a new line.

I'm away from the computer now, so can't quote the command, but it's the unanimous one across your Google search.
I'm on open suse?
ViciBox Redux v5.0.2-130821
Asterisk v.1.8.230.-vici
-Please feel free to message me about how to find out more version information, and how I may update to the latest. - I've no clue!
dailafing
 
Posts: 59
Joined: Wed Oct 23, 2013 1:25 pm
Location: UK, Wales

Re: Can't access Web log in, when typing dialler's in addres

Postby dailafing » Wed Sep 30, 2015 7:54 am

Ok so the only one I could find that works is:

Code: Select all
To check whether if apache is running or not (the status), type:

sudo service apache2 status
at the command line.


Which shows that something had failed...

Image

After reading the output, I checked the suggested commands.... the first one returned:
Image

The journal command returned these:

Image

Image

Image

Image

Image

I'm at a dead end... I just want my carrier dial plan...
ViciBox Redux v5.0.2-130821
Asterisk v.1.8.230.-vici
-Please feel free to message me about how to find out more version information, and how I may update to the latest. - I've no clue!
dailafing
 
Posts: 59
Joined: Wed Oct 23, 2013 1:25 pm
Location: UK, Wales

Re: Can't access Web log in, when typing dialler's in addres

Postby omarrodriguezt » Wed Sep 30, 2015 8:13 am

The carrier dial plan are stored in these files:
/etc/asterisk/extensions-vicidial.conf
and
/etc/asterisk/extensions.conf

If you are familiar with MySql you can see it also in this table:
vicidial_server_carriers;
http://www.ITContinental.com
Dedicated USA Servers - Vicibox - Vicidial - Limesurvey - Vtiger CRM - More than 15 years experience - Hablamos Español
omarrodriguezt
 
Posts: 667
Joined: Fri Jun 05, 2009 12:22 pm
Location: Dominican Republic


Return to Support

Who is online

Users browsing this forum: Bing [Bot] and 101 guests