CLI outbound numbers

[Ryanpillay87]

Hi guys,

Currently im running about 20 phones, but they are all dialing out of the same number.
This is causing confusion and i need about 10 phones to dial from another number.
How do i change the CLI on those 10 phones??

[williamconley]

1) Welcome to the Party!

2) As you are obviously new here, I have some suggestions to help us all help you:

When you post, please post your entire configuration including (but not limited to) your installation method (7.X.X?) and vicidial version with build (VERSION: 2.X-XXXx ... BUILD: #####-####).

This IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "manual/from scratch" you must post your operating system with version (and the .iso version from which you installed your original operating system) plus a link to the installation instructions you used. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

3) In Vicidial, agents do not dial out. The Campaign dials out.

4) Are you using Vicidial in Manual Dial mode? If so, the phone number that will be used is in Admin->Phones for each phone. But if your carrier configuration (admin->carriers) has a caller id hard coded into it, you'll need to remove that for any CID settings in Vicidial to work properly.