Problem with NA disposition ratio mode

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Problem with NA disposition ratio mode

Postby macaruchi » Tue May 08, 2018 5:08 pm

Hi!
I am dialing ratio for my campaiign , I have a few numbers with dispo NA setup automatic by dialer. I take these numbers and created a new list for dialing these.
When I dial these numbers the ring status is passed to the agents .
I dont know why these numbers are passed to the agents, the agnets must to hangup the call and dispo N

Anybody has a cluee about this ?

TIA
*------------------
ViciBox 11 | Version:2.14b | SVN Version: 3764| DB Schema Version:1697| BUILD: 230927-0857 | 2 Processors 8 Core | 32 GB Ram | 1 Tera HD
macaruchi
 
Posts: 138
Joined: Wed Sep 21, 2016 8:11 pm

Re: Problem with NA disposition ratio mode

Postby williamconley » Tue May 08, 2018 5:25 pm

macaruchi wrote:When I dial these numbers the ring status is passed to the agents

I must assume from this that you mean "agents hear ringing instead of a human voice". If that's not the case, please try again, perhaps I'll get it this time.

If your agents ARE hearing ringing after being passed a call: You are being ripped off. Your carrier (or someone above them in the food chain) is FAKE answering the calls, passing an ANSWER signal to the dialer, and then playing a ring-tone audio file. This is a violation of your contract with your carrier and a blatant ripoff as they are now charging you for a call that was never actually passed to the called party.

Of course, they could also be detecting a fake callerid (if you're using one) and ripping you off in reverse if they believe you are illegally robodialing. In either case: Verify that you are in fact using an outbound CallerID that you own (makes this a real call) and then complain to your carrier that you will not be paying for these calls and that you want the carrier to stop routing calls through whichever upline they are sending them. Present them with detailed logs showing the number dialed, date/time/timezone and length of call. They should "UNbill" you for these calls.

Oh: And get a second carrier now if you don't have one (third if you can, since they don't have monthly fees! doesn't cost extra to have multiple carriers, you pay by the minute not by the connection).
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20258
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Problem with NA disposition ratio mode

Postby macaruchi » Tue May 08, 2018 8:46 pm

Thks for your explanation, I think you all rigth.
Just one more thing , do you have another carriers that you recommend me ? I have 2 carriers now but another more it is not problem

TIA
*------------------
ViciBox 11 | Version:2.14b | SVN Version: 3764| DB Schema Version:1697| BUILD: 230927-0857 | 2 Processors 8 Core | 32 GB Ram | 1 Tera HD
macaruchi
 
Posts: 138
Joined: Wed Sep 21, 2016 8:11 pm

Re: Problem with NA disposition ratio mode

Postby williamconley » Tue May 08, 2018 8:56 pm

Carriers for Asterisk/VoIP/SIP traffic are listed in many places, tickets, wiki's, etc for both FreePBX and Vicidial. Google is your friend there. lol

I'm prohibited from disclosing (by my employer) to anyone other than paying clients. :(
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20258
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Problem with NA disposition ratio mode

Postby macaruchi » Wed May 09, 2018 10:43 am

OK, anyway, Thks!!
*------------------
ViciBox 11 | Version:2.14b | SVN Version: 3764| DB Schema Version:1697| BUILD: 230927-0857 | 2 Processors 8 Core | 32 GB Ram | 1 Tera HD
macaruchi
 
Posts: 138
Joined: Wed Sep 21, 2016 8:11 pm


Return to Support

Who is online

Users browsing this forum: Google [Bot] and 91 guests