Firewall issue in Vicibox 8.1.2

[rajivtech22]

Installation Info
--------------------
Vicibox 8.1.2 from .iso | VERSION: 2.14-695a BUILD: 181116-1133 | Asterisk 13.21.1 | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Dell PowerEdge CS24-SC | Intel Xeon 5420 | Hosted in Datasoft Cloud based Dedicated Server
---------------------

Hello, I am having lot of trouble using firewall. Most of the time i can not connect my softphone and 408 Request Time Out. All my network connection is fine. but somehow i am not able to connect. I have even whitelisted the ip but still it didnt solve my problem. Is it possible to turn off firewall.. i will rather use fail2ban to protect from attack thank using the new firewall implemented in Vicidial.

Thanks

[williamconley]

1) "Most of the time i can not connect "? If it's "most of the time", it's unlikely firewall related.

2) Turn off iptables.

Code: Select all

iptables -I INPUT 1 -j ACCEPT

Test.
Turn ON iptables.

Code: Select all

iptables -D INPUT -j ACCEPT

If that solves the problem, you were right and the problem is firewall related. In that case

Code: Select all

iptables -I INPUT 1 -s xx.xx.xx.xx/32 -j ACCEPT

But using the IP address of your soft phone, of course.

3) Do you access your server from the local network or the public network? If local, you could whitelist the entire local subnet instead:

Code: Select all

iptables -I INPUT 1 -s 192.168.1.0/24 -j ACCEPT

Of course, replace 192.168.1.0/24 with your local subnet.

[rajivtech22]

Yes.
The problem is firewall related. as soon i turned off Iptables. i got connected.

I access my dialer from public network.

[williamconley]

Yes.
The problem is firewall related. as soon i turned off Iptables. i got connected.

I access my dialer from public network.

With your public IP address:

Code: Select all

iptables -I INPUT 1 -s xx.xx.xx.xx/32 -j ACCEPT

Does this solve your problem until reboot?

[rajivtech22]

Thanks for help