vicidial.org

VICIDIAL astGUIclient discussion forum

Skip to content

Vicidial.org Home      Vicidial Forum      Vicidial Wiki      Vicidial Issue Tracker      astGUIclient Project Page


Delay between answer and transfer

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Post a reply

Delay between answer and transfer

Postby shawno » Tue Oct 09, 2007 12:46 pm

Hi All,

I'm having an issue with the Ratio dial on a campaign. There seems to be a 3-4 second delay between amount of time the recipient picks up and the transfer to the agent. I'm not sure how to remedy this. Can anyone help?
shawno
 
Posts: 18
Joined: Mon Sep 24, 2007 3:03 pm
Top

Postby enjay » Tue Oct 09, 2007 2:19 pm

Are there multiple servers? If so is the time synced "exactly" between the two?

What is the load average when this happens? and what version of asterisk/zaptel/vicidial are you using?

what are you using for timing?

-Art
enjay
 
Posts: 806
Joined: Mon Jun 19, 2006 12:40 pm
Location: Utah
Top

Postby saqibali » Wed Oct 10, 2007 11:08 am

i am also facing the same problem .

asterisk 1.2.18
zaptel 1.2.18
astguiclient 2.0.2

load average: 0.59, 0.54, 0.45

everything on one server .
saqibali
 
Posts: 48
Joined: Wed Nov 22, 2006 7:48 pm
Top

Postby mflorell » Wed Oct 10, 2007 5:12 pm

zaptel timer?

Are you doing recording?

What kind of trunks are you using?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby saqibali » Wed Oct 10, 2007 11:17 pm

using TE420B card .
yes also doing recording.
using SIP trunks.
saqibali
 
Posts: 48
Joined: Wed Nov 22, 2006 7:48 pm
Top

Postby saqibali » Thu Oct 11, 2007 12:40 am

zaptel timer is TE420b card with Audio codecs Gateway. Im using Zap Trunks for outbound and for local SIP is being used for agents. Yes im doing recording also. Please let me know if there is any other details that you require.


Thanks,

Saqib.
saqibali
 
Posts: 48
Joined: Wed Nov 22, 2006 7:48 pm
Top

Postby enjay » Thu Oct 11, 2007 11:34 am

AGI output when this happens?
enjay
 
Posts: 806
Joined: Mon Jun 19, 2006 12:40 pm
Location: Utah
Top

Postby saqibali » Thu Oct 11, 2007 12:45 pm

2007-10-11 13:30:12|call_log.agi|Perl Environment Dump:
2007-10-11 13:30:12|call_log.agi|0|919024628497
2007-10-11 13:30:12|call_log.agi|AGI Environment Dump:
2007-10-11 13:30:12|call_log.agi| -- accountcode =
2007-10-11 13:30:12|call_log.agi| -- callerid = 0000000000
2007-10-11 13:30:12|call_log.agi| -- calleridname = V1011133012000132131
2007-10-11 13:30:12|call_log.agi| -- callingani2 = 0
2007-10-11 13:30:12|call_log.agi| -- callingpres = 0
2007-10-11 13:30:12|call_log.agi| -- callingtns = 0
2007-10-11 13:30:12|call_log.agi| -- callington = 0
2007-10-11 13:30:12|call_log.agi| -- channel = Local/919024628497@default-2040,2
2007-10-11 13:30:12|call_log.agi| -- context = default
2007-10-11 13:30:12|call_log.agi| -- dnid = unknown
2007-10-11 13:30:12|call_log.agi| -- enhanced = 0.0
2007-10-11 13:30:12|call_log.agi| -- extension = 919024628497
2007-10-11 13:30:12|call_log.agi| -- language = en
2007-10-11 13:30:12|call_log.agi| -- priority = 1
2007-10-11 13:30:12|call_log.agi| -- rdnis = unknown
2007-10-11 13:30:12|call_log.agi| -- request = call_log.agi
2007-10-11 13:30:12|call_log.agi| -- type = Local
2007-10-11 13:30:12|call_log.agi| -- uniqueid = 1192123812.106807
2007-10-11 13:30:12|call_log.agi|AGI Variables: |1192123812.106807|Local/919024628497@default-2040,2|919024628497|Local|V1011133012000132131|
2007-10-11 13:30:12|call_log.agi|+++++ CALL LOG START : 2007-10-11 13:30:12
2007-10-11 13:30:12|call_log.agi||INSERT INTO call_log (uniqueid,channel,channel_group,type,server_ip,extension,number_dialed,start_time,start_epoch,end_time,end_epoch,length_in_sec,length_in_min,caller_code) values('1192123812.106807','Local/919024628497@default-2040,2','','Local','10.10.10.48','919024628497','','2007-10-11 13:30:12','1192123812','','','','','V1011133012000132131')|
2007-10-11 13:30:13|call_log.agi|Perl Environment Dump:
2007-10-11 13:30:13|call_log.agi|0|918076230314
2007-10-11 13:30:13|call_log.agi|AGI Environment Dump:
2007-10-11 13:30:13|call_log.agi| -- accountcode =
2007-10-11 13:30:13|call_log.agi| -- callerid = 0000000000
2007-10-11 13:30:13|call_log.agi| -- calleridname = V1011133012000112710
2007-10-11 13:30:13|call_log.agi| -- callingani2 = 0
2007-10-11 13:30:13|call_log.agi| -- callingpres = 0
2007-10-11 13:30:13|call_log.agi| -- callingtns = 0
2007-10-11 13:30:13|call_log.agi| -- callington = 0
2007-10-11 13:30:13|call_log.agi| -- channel = Local/918076230314@default-faad,2
2007-10-11 13:30:13|call_log.agi| -- context = default
2007-10-11 13:30:13|call_log.agi| -- dnid = unknown
2007-10-11 13:30:13|call_log.agi| -- enhanced = 0.0
2007-10-11 13:30:13|call_log.agi| -- extension = 918076230314
2007-10-11 13:30:13|call_log.agi| -- language = en
2007-10-11 13:30:13|call_log.agi| -- priority = 1
2007-10-11 13:30:13|call_log.agi| -- rdnis = unknown
2007-10-11 13:30:13|call_log.agi| -- request = call_log.agi
2007-10-11 13:30:13|call_log.agi| -- type = Local
2007-10-11 13:30:13|call_log.agi| -- uniqueid = 1192123813.106810
2007-10-11 13:30:13|call_log.agi|AGI Variables: |1192123813.106810|Local/918076230314@default-faad,2|918076230314|Local|V1011133012000112710|
2007-10-11 13:30:13|call_log.agi||INSERT INTO call_log (uniqueid,channel,channel_group,type,server_ip,extension,number_dialed,start_time,start_epoch,end_time,end_epoch,length_in_sec,length_in_min,caller_code) values('1192123813.106810','Local/918076230314@default-faad,2','','Local','10.10.10.48','918076230314','','2007-10-11 13:30:13','1192123813','','','','','V1011133012000112710')|
2007-10-11 13:30:13|VD_amd.agi|Perl Environment Dump:
2007-10-11 13:30:13|VD_amd.agi|0|8369
2007-10-11 13:30:13|VD_amd.agi|AGI Environment Dump:
2007-10-11 13:30:13|VD_amd.agi| -- accountcode =
2007-10-11 13:30:13|VD_amd.agi| -- callerid = 0000000000
2007-10-11 13:30:13|VD_amd.agi| -- calleridname = V1011132941000132043
2007-10-11 13:30:13|VD_amd.agi| -- callingani2 = 0
2007-10-11 13:30:13|VD_amd.agi| -- callingpres = 0
2007-10-11 13:30:13|VD_amd.agi| -- callingtns = 0
2007-10-11 13:30:13|VD_amd.agi| -- callington = 0
2007-10-11 13:30:13|VD_amd.agi| -- channel = Zap/23-1
2007-10-11 13:30:13|VD_amd.agi| -- context = default
2007-10-11 13:30:13|VD_amd.agi| -- dnid = unknown
2007-10-11 13:30:13|VD_amd.agi| -- enhanced = 0.0
2007-10-11 13:30:13|VD_amd.agi| -- extension = 8369
2007-10-11 13:30:13|VD_amd.agi| -- language = en
2007-10-11 13:30:13|VD_amd.agi| -- priority = 4
2007-10-11 13:30:13|VD_amd.agi| -- rdnis = unknown
2007-10-11 13:30:13|VD_amd.agi| -- request = VD_amd.agi
2007-10-11 13:30:13|VD_amd.agi| -- type = Zap
2007-10-11 13:30:13|VD_amd.agi| -- uniqueid = 1192123781.106579
2007-10-11 13:30:13|VD_amd.agi|AGI Variables: |1192123781.106579|Zap/23-1|8369|Zap|V1011132941000132043|
2007-10-11 13:30:13|VD_amd.agi|+++++ VD amd START : |132043|2007-10-11 13:30:13||4|V1011132941000132043|
2007-10-11 13:30:13|VD_amd.agi|AAAAA AMD results: |AMD_PERSON|AMD_HUMAN-300-300|
2007-10-11 13:30:13|VD_amd.agi| AMD exiting
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi|Perl Environment Dump:
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi|0|8369
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi|callerID changed: V1011132941000132043
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi|AGI Environment Dump:
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- accountcode =
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- callerid = 0000000000
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- calleridname = V1011132941000132043
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- callingani2 = 0
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- callingpres = 0
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- callingtns = 0
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- callington = 0
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- channel = Zap/23-1
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- context = default
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- dnid = unknown
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- enhanced = 0.0
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- extension = 8369
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- language = en
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- priority = 5
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- rdnis = unknown
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- request = agi-VDAD_LB_transfer.agi
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- type = Zap
2007-10-11 13:30:13|agi-VDAD_LB_transfer.agi| -- uniqueid = 1192123781.106579
saqibali
 
Posts: 48
Joined: Wed Nov 22, 2006 7:48 pm
Top

Postby saqibali » Thu Oct 11, 2007 12:49 pm

Also i am getting the errors on CLI

Oct 11 12:35:57 WARNING[9983]: res_agi.c:247 launch_script: Unable to create toast pipe: Too many open files
Oct 11 13:29:16 WARNING[12348]: channel.c:565 ast_channel_alloc: Channel allocation failed: Can't create alert pipe!
Oct 11 13:29:16 WARNING[12348]: chan_local.c:555 local_new: Unable to allocate channel structure(s)
Oct 11 13:34:30 WARNING[30151]: res_agi.c:170 launch_netscript: Unable to create socket: Too many open files
Oct 11 13:38:05 NOTICE[15124]: manager.c:1457 accept_thread: Accept returned -1: Too many open files

there are 60 agents and dial level is 3-4.
saqibali
 
Posts: 48
Joined: Wed Nov 22, 2006 7:48 pm
Top

Postby saqibali » Thu Oct 11, 2007 1:32 pm

as i alos do the ulimit -n 65535 .... but as the dialer dials mor than 100 calls these warnings showed up .
saqibali
 
Posts: 48
Joined: Wed Nov 22, 2006 7:48 pm
Top

Postby mflorell » Fri Oct 12, 2007 10:27 am

You have to have the open file limit set before Asterisk is started or it will go with the default. This is a pain to set on some systems as a default.
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top
Post a reply

Return to Support

Who is online

Users browsing this forum: No registered users and 148 guests

Powered by phpBB® Forum Software © phpBB Group