No Asterisk Socket

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

No Asterisk Socket

Postby PJ111288 » Mon Jun 08, 2020 6:17 am

Hi Williamconley

I am trying to install asterisk 13.21 on centos 6.10 and i have done all and getting 8 sockets to expect asterisk and astshalll.

[root@98 ~]# screen -ls
There are screens on:
2853.ASTupdate (Detached)
2879.ASTconf3way (Detached)
2855.ASTsend (Detached)
2871.ASTfastlog (Detached)
2857.ASTlisten (Detached)
2865.ASTVDremote (Detached)
2859.ASTVDauto (Detached)
2868.ASTVDadapt (Detached)
8 Sockets in /var/run/screen/S-root.



But asterisk is installed successfully and no error in CLI.


[root@98 ~]# perl /usr/share/astguiclient/ADMIN_keepalive_ALL.pl --debugX

----- SUPER-DUPER DEBUGGING -----

Asterisk version: 1 13
AST_update set to keepalive
AST_send_listen set to keepalive
AST_VDauto_dial set to keepalive
AST_VDremote_agents set to keepalive
AST_VDadapt set to keepalive
FastAGI_log set to keepalive
ip_relay set to keepalive
0| 1 /sbin/init|
1| 2 [kthreadd]|
2| 3 [migration/0]|
3| 4 [ksoftirqd/0]|
4| 5 [stopper/0]|
5| 6 [watchdog/0]|
6| 7 [migration/1]|
7| 8 [stopper/1]|
8| 9 [ksoftirqd/1]|
9| 10 [watchdog/1]|
10| 11 [migration/2]|
11| 12 [stopper/2]|
12| 13 [ksoftirqd/2]|
13| 14 [watchdog/2]|
14| 15 [migration/3]|
15| 16 [stopper/3]|
16| 17 [ksoftirqd/3]|
17| 18 [watchdog/3]|
18| 19 [events/0]|
19| 20 [events/1]|
20| 21 [events/2]|
21| 22 [events/3]|
22| 23 [events/0]|
23| 24 [events/1]|
24| 25 [events/2]|
25| 26 [events/3]|
26| 27 [events_long/0]|
27| 28 [events_long/1]|
28| 29 [events_long/2]|
29| 30 [events_long/3]|
30| 31 [events_power_ef]|
31| 32 [events_power_ef]|
32| 33 [events_power_ef]|
33| 34 [events_power_ef]|
34| 35 [cgroup]|
35| 36 [khelper]|
36| 37 [netns]|
37| 38 [async/mgr]|
38| 39 [pm]|
39| 40 [sync_supers]|
40| 41 [bdi-default]|
41| 42 [kintegrityd/0]|
42| 43 [kintegrityd/1]|
43| 44 [kintegrityd/2]|
44| 45 [kintegrityd/3]|
45| 46 [kblockd/0]|
46| 47 [kblockd/1]|
47| 48 [kblockd/2]|
48| 49 [kblockd/3]|
49| 50 [kacpid]|
50| 51 [kacpi_notify]|
51| 52 [kacpi_hotplug]|
52| 53 [ata_aux]|
53| 54 [ata_sff/0]|
54| 55 [ata_sff/1]|
55| 56 [ata_sff/2]|
56| 57 [ata_sff/3]|
57| 58 [ksuspend_usbd]|
58| 59 [khubd]|
59| 60 [kseriod]|
60| 61 [md/0]|
61| 62 [md/1]|
62| 63 [md/2]|
63| 64 [md/3]|
64| 65 [md_misc/0]|
65| 66 [md_misc/1]|
66| 67 [md_misc/2]|
67| 68 [md_misc/3]|
68| 69 [linkwatch]|
69| 72 [khungtaskd]|
70| 73 [lru-add-drain/0]|
71| 74 [lru-add-drain/1]|
72| 75 [lru-add-drain/2]|
73| 76 [lru-add-drain/3]|
74| 77 [kswapd0]|
75| 78 [ksmd]|
76| 79 [khugepaged]|
77| 80 [aio/0]|
78| 81 [aio/1]|
79| 82 [aio/2]|
80| 83 [aio/3]|
81| 84 [crypto/0]|
82| 85 [crypto/1]|
83| 86 [crypto/2]|
84| 87 [crypto/3]|
85| 94 [kthrotld/0]|
86| 95 [kthrotld/1]|
87| 96 [kthrotld/2]|
88| 97 [kthrotld/3]|
89| 99 [kpsmoused]|
90| 100 [usbhid_resumer]|
91| 101 [deferwq]|
92| 134 [kdmremove]|
93| 135 [kstriped]|
94| 297 [scsi_eh_0]|
95| 298 [scsi_eh_1]|
96| 384 [scsi_eh_2]|
97| 387 [virtio-blk]|
98| 419 [kdmflush]|
99| 421 [kdmflush]|
100| 487 [jbd2/dm-0-8]|
101| 488 [ext4-dio-unwrit]|
102| 582 /sbin/udevd -d|
103| 691 [flush-252:0]|
104| 707 [virtio-net]|
105| 733 [vballoon]|
106| 1120 [jbd2/vda1-8]|
107| 1121 [ext4-dio-unwrit]|
108| 1165 [kauditd]|
109| 1224 [ib_addr]|
110| 1229 [infiniband/0]|
111| 1230 [infiniband/1]|
112| 1231 [infiniband/2]|
113| 1232 [infiniband/3]|
114| 1241 [ib_mcast]|
115| 1246 [iw_cm_wq]|
116| 1251 [ib_cm/0]|
117| 1252 [ib_cm/1]|
118| 1253 [ib_cm/2]|
119| 1254 [ib_cm/3]|
120| 1259 [rdma_cm]|
121| 1280 [ipoib_flush]|
122| 1312 [flush-253:0]|
123| 1511 auditd|
124| 1545 /sbin/rsyslogd -i /var/run/syslogd.pid -c 5|
125| 1579 irqbalance --pid=/var/run/irqbalance.pid|
126| 1598 rpcbind|
127| 1618 dbus-daemon --system|
128| 1631 NetworkManager --pid-file=/var/run/NetworkManager/NetworkManager.pid|
129| 1635 /usr/sbin/modem-manager|
130| 1702 /usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -B -u -f /var/log/wpa_supplicant.log -P /var/run/wpa_supplicant.pid|
131| 1742 rpc.statd|
132| 1777 cupsd -C /etc/cups/cupsd.conf|
133| 1793 /usr/sbin/acpid|
134| 1805 hald|
135| 1806 hald-runner|
136| 1850 hald-addon-input: Listening on /dev/input/event2 /dev/input/event0|
137| 1854 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket|
138| 1878 automount --pid-file /var/run/autofs.pid|
139| 2021 /usr/sbin/sshd|
140| 2032 ntpd -u ntp:ntp -p /var/run/ntpd.pid -g|
141| 2069 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --socket=/var/lib/mysql/mysql.sock --pid-file=/var/run/mysqld/mysqld.pid --basedir=/usr --user=mysql|
142| 2207 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --log-error=/var/log/mysqld.log --pid-file=/var/run/mysqld/mysqld.pid --socket=/var/lib/mysql/mysql.sock --port=3306|
143| 2243 /usr/sbin/spice-vdagentd|
144| 2246 /usr/sbin/console-kit-daemon --no-daemon|
145| 2388 /usr/libexec/postfix/master|
146| 2398 pickup -l -t fifo -u|
147| 2399 qmgr -l -t fifo -u|
148| 2406 /usr/sbin/abrtd|
149| 2433 /usr/sbin/httpd|
150| 2470 /bin/sh /usr/sbin/safe_asterisk|
151| 2476 crond|
152| 2479 /usr/sbin/asterisk -f -vvvg -c|
asterisk RUNNING: | 2479 /usr/sbin/asterisk -f -vvvg -c|
153| 2492 /usr/sbin/atd|
154| 2520 /usr/sbin/certmonger -S -p /var/run/certmonger.pid|
155| 2524 /usr/sbin/gdm-binary -nodaemon|
156| 2532 /sbin/mingetty /dev/tty2|
157| 2534 /sbin/mingetty /dev/tty3|
158| 2539 /sbin/mingetty /dev/tty4|
159| 2542 /sbin/udevd -d|
160| 2543 /sbin/mingetty /dev/tty5|
161| 2545 /sbin/mingetty /dev/tty6|
162| 2596 /usr/libexec/gdm-simple-slave --display-id /org/gnome/DisplayManager/Display1|
163| 2599 /usr/sbin/httpd|
164| 2600 /usr/sbin/httpd|
165| 2601 /usr/sbin/httpd|
166| 2602 /usr/sbin/httpd|
167| 2603 /usr/sbin/httpd|
168| 2604 /usr/sbin/httpd|
169| 2605 /usr/sbin/httpd|
170| 2606 /usr/sbin/httpd|
171| 2608 /usr/bin/Xorg :0 -br -verbose -audit 4 -auth /var/run/gdm/auth-for-gdm-WHzfbD/database -nolisten tcp vt1|
172| 2714 /usr/bin/dbus-launch --exit-with-session|
173| 2715 /bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session|
174| 2716 /usr/bin/gnome-session --autostart=/usr/share/gdm/autostart/LoginWindow/|
175| 2719 /usr/libexec/devkit-power-daemon|
176| 2723 /usr/libexec/gconfd-2|
177| 2739 /usr/libexec/at-spi-registryd|
178| 2743 /usr/bin/spice-vdagent|
179| 2744 /usr/libexec/gnome-settings-daemon --gconf-prefix=/apps/gdm/simple-greeter/settings-manager-plugins|
180| 2748 /usr/libexec/bonobo-activation-server --ac-activate --ior-output-fd=12|
181| 2753 /sbin/udevd -d|
182| 2794 /usr/libexec/gvfsd|
183| 2795 metacity|
184| 2797 /usr/libexec/gdm-simple-greeter|
185| 2798 /usr/libexec/polkit-gnome-authentication-agent-1|
186| 2800 gnome-power-manager|
187| 2802 /usr/libexec/polkit-1/polkitd|
188| 2811 /usr/bin/pulseaudio --start --log-target=syslog|
189| 2813 /usr/libexec/rtkit-daemon|
190| 2818 pam: gdm-password|
191| 2853 /usr/bin/SCREEN -d -m -S ASTupdate /usr/share/astguiclient/AST_update_AMI2.pl|
192| 2855 /usr/bin/SCREEN -d -m -S ASTsend /usr/share/astguiclient/AST_manager_send.pl|
193| 2857 /usr/bin/SCREEN -d -m -S ASTlisten /usr/share/astguiclient/AST_manager_listen_AMI2.pl|
194| 2859 /usr/bin/SCREEN -d -m -S ASTVDauto /usr/share/astguiclient/AST_VDauto_dial.pl|
195| 2861 /usr/bin/perl /usr/share/astguiclient/AST_manager_send.pl|
AST_send RUNNING: |/usr/share/astguiclient/AST_manager_send.pl|
196| 2862 /usr/bin/perl /usr/share/astguiclient/AST_update_AMI2.pl|
AST_update RUNNING: |/usr/share/astguiclient/AST_update_AMI2.pl|
197| 2863 /usr/bin/perl /usr/share/astguiclient/AST_manager_listen_AMI2.pl|
AST_listen RUNNING: |/usr/share/astguiclient/AST_manager_listen_AMI2.pl|
198| 2864 /usr/bin/perl /usr/share/astguiclient/AST_VDauto_dial.pl|
AST_VDauto_dial RUNNING: |/usr/share/astguiclient/AST_VDauto_dial.pl|
199| 2865 /usr/bin/SCREEN -d -m -S ASTVDremote /usr/share/astguiclient/AST_VDremote_agents.pl --debug|
200| 2867 /usr/bin/perl /usr/share/astguiclient/AST_VDremote_agents.pl --debug|
AST_VDremote_agents RUNNING: |/usr/share/astguiclient/AST_VDremote_agents.pl --debug|
201| 2868 /usr/bin/SCREEN -d -m -S ASTVDadapt /usr/share/astguiclient/AST_VDadapt.pl --debug|
202| 2870 /usr/bin/perl /usr/share/astguiclient/AST_VDadapt.pl --debug|
AST_VDadapt RUNNING: |/usr/share/astguiclient/AST_VDadapt.pl --debug|
203| 2871 /usr/bin/SCREEN -d -m -S ASTfastlog /usr/share/astguiclient/FastAGI_log.pl --debug|
204| 2873 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl --debug|
FastAGI_log RUNNING: |/usr/share/astguiclient/FastAGI_log.pl --debug|
205| 2875 ip_relay 40569 127.0.0.1 4569 9999999|
ip_relay RUNNING: | 2875 ip_relay 40569 127.0.0.1 4569 9999999|
206| 2876 ip_relay 41569 127.0.0.1 4569 9999999|
ip_relay RUNNING: | 2876 ip_relay 41569 127.0.0.1 4569 9999999|
207| 2877 ip_relay 42569 127.0.0.1 4569 9999999|
ip_relay RUNNING: | 2877 ip_relay 42569 127.0.0.1 4569 9999999|
208| 2879 /usr/bin/SCREEN -d -m -S ASTconf3way /usr/share/astguiclient/AST_conf_update_3way.pl --debug|
209| 2881 /usr/bin/perl /usr/share/astguiclient/AST_conf_update_3way.pl --debug|
AST_conf_3way RUNNING: |/usr/share/astguiclient/AST_conf_update_3way.pl --debug|
210| 2904 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl --debug|
FastAGI_log RUNNING: |/usr/share/astguiclient/FastAGI_log.pl --debug|
211| 2905 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl --debug|
FastAGI_log RUNNING: |/usr/share/astguiclient/FastAGI_log.pl --debug|
212| 2906 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl --debug|
FastAGI_log RUNNING: |/usr/share/astguiclient/FastAGI_log.pl --debug|
213| 2907 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl --debug|
FastAGI_log RUNNING: |/usr/share/astguiclient/FastAGI_log.pl --debug|
214| 2908 /usr/bin/perl /usr/share/astguiclient/FastAGI_log.pl --debug|
FastAGI_log RUNNING: |/usr/share/astguiclient/FastAGI_log.pl --debug|
215| 2988 sshd: root@pts/8 |
216| 2996 -bash|
217| 3196 perl /usr/share/astguiclient/ADMIN_keepalive_ALL.pl --debugX|
218| 3198 /bin/ps -o %p %a --no-headers -A|
|SELECT count(*) from system_settings where timeclock_end_of_day LIKE "%1050%";|
Uptime debug 1: | 10:50:50 up 4 min, 1 user, load average: 0.27, 0.24, 0.10
|
Uptime debug 2: | 10:50:50 up 4 min|4 min|0| seconds: |262.20|
Uptime debug 3: |1|UPDATE servers SET system_uptime='4 min' where server_ip='192.168.2.52';|
CONFIRM ASTERISK IS RUNNING: |Y|1|N|N|0|
RESET LIST: 0|1050DONE

Centos 6.10
Database 1595
Svn 2.14

Asterisk installation source >>>http://vicidial.org/docs/ASTERISK_13.txt

Dahdi Installation source>>https://downloads.asterisk.org/pub/telephony and version 2.10 because dahdi version 2.11 which is available on http://vicidial.org/docs/ASTERISK_13.txt isnt working here.

Could you please advise on this?
PJ111288
 
Posts: 71
Joined: Tue Nov 13, 2018 7:41 am

Re: No Asterisk Socket

Postby carpenox » Mon Jun 08, 2020 10:52 pm

is is probably installed as a service. im not sure the command on centos to check this but in opensuse it is "systemctl status" that will show the service daemons that are running. What happens when you type "asterisk -r" ?
Alma Linux 9.4 | SVN Version: 3890 | DB Schema Version: 1721 | Asterisk 18.21.1 | PHP8
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WA: +19549477572
GC: https://join.skype.com/ujkQ7i5lV78O | DC: https://discord.gg/DVktk6smbh
carpenox
 
Posts: 2428
Joined: Wed Apr 08, 2020 2:02 am
Location: St Petersburg, FL

Re: No Asterisk Socket

Postby PJ111288 » Thu Jun 11, 2020 9:30 am

It goes to asterisk CLI.
PJ111288
 
Posts: 71
Joined: Tue Nov 13, 2018 7:41 am

Re: No Asterisk Socket

Postby carpenox » Thu Jun 11, 2020 10:10 am

ok so everything is worknig fine then?
Alma Linux 9.4 | SVN Version: 3890 | DB Schema Version: 1721 | Asterisk 18.21.1 | PHP8
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WA: +19549477572
GC: https://join.skype.com/ujkQ7i5lV78O | DC: https://discord.gg/DVktk6smbh
carpenox
 
Posts: 2428
Joined: Wed Apr 08, 2020 2:02 am
Location: St Petersburg, FL


Return to Support

Who is online

Users browsing this forum: Google [Bot] and 111 guests