Configure sip trunk

[Tom75]

Hi all, I am trying to configure a carrier trunk. I got a free SIP account from iptel.org.
Here is my info from there:

username: xxxx@iptel.org
password:xxxx
sip address: sip:xxxx@iptel.org
registrar address: sip.iptel.org

And when I configure my carrier trunk, I use these:

Registration String:
sip:xxxx@iptel.org:xxxx@iptel.org:5060

Account Entry
[iptel]
disallow=all
allow=ulaw
type=friend
username=xxxx@iptel.org
secret=xxxx
host=sip:xxxx@iptel.org
dtmfmode=rfc2833
context=trunkinbound
nat=force_rport

Protocol:
SIP

Globals String:

Dialplan Entry:
exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,2,Dial(sip:xxxx@iptel.org:xxxx@iptel.org:5060/${EXTEN:2},,tTor)
exten => _91NXXNXXXXXX,3,Hangup

Server IP:
192.168.147.128

But when I use "sip show peers" on the asterisl cli, I got this:
Name/username|Host|Dyn|Forceport|Comedia|ACL|Port|Status|Description
iptel/xxxx@iptel.org|212.79.111.155 ||Yes|No||5060|unreachable|

Can anyone help please?

Vicibox 9.0 from .iso | Vicidial 3133-2.14-718a Build 190902-0839| Asterisk 13.27.0 | Single Server | vmware | No Extra Software After Installation

[carpenox]

Are you using a softphone? If so which one

[Tom75]

Yes, I use eyebeam

[carpenox]

ok two questions, one does your free sip trunk come with channels? just because you get a free trunk doesnt mean u get channels(lines) with it. normally you have to pay for channels

two: does your eyebeam register to your server?

[Tom75]

I think that it does not come with channels because it's free.
My eyebeam is properly registered on my server.

[carpenox]

yea u need to purchase channels....

[Tom75]

So if an sip account come with channels it should work? And I have another question, how do I get a phone number if I use a softphone?

[carpenox]

You have to purchase one, your SIP provider most likely sells them. They are also called DID's