Carrier unreachable in asterisk CLI

[Tom75]

Hi all, I created a carrier trunk:

Registration String:
xxxx@host.fr:xxxx@host.fr:5060

Account Entry
[xxx]
allow=ulaw
type=peer
username=xxxx
secret=xxxx
host=host.fr
dtmfmode=auto
nat=force_rport
insecure=very
maxexpiry=3600
qualify=yes

Protocol:
SIP

Globals String:

Dialplan Entry:
exten => _933.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _933.,2,Dial(xxxx@host.fr:xxxx@host.fr:5060/${EXTEN:2},,tTor)
exten => 933.,3,Hangup

Server IP:
192.168.147.128

But when I use "sip show peers", the carrier I created is unreachable.




Vicibox 9.0 from .iso | Vicidial 3133-2.14-718a Build 190902-0839| Asterisk 13.27.0 | Single Server | vmware | No Extra Software After Installation

[carpenox]

That's your local ip. You need your public ip set

[Kabis]

In sip.conf
Add your public IP. Your carrier is public IP. So if you want to reach the carrier means, you need to change the server ip in public IP. Then it will reach.

[Tom75]

Hi, thank you for your answer. I need some help because setting this public ip please. I'm running the server on a vmware. So should I use the public ip of my windows machine or how can i get the public ip for the server?

[carpenox]

yes of your windows machine, your publicly accessible IP address from whatismyipaddress.com

[Tom75]

which parameter should I change ,please. I changed the externip, but nothing has changed.

[carpenox]

you set it in server settings and rebuild confs??

[Tom75]

No, I directly change the sip.conf file, I will try it againa and see if it is running

[Tom75]

It is still unreachable.

[carpenox]

with my carrier I have to submit my server ip to them, perhaps this is the case with your sip trunk as well? for the end termination