All installation and configuration problems and questions
Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N
by rajeevpn » Fri Oct 19, 2007 3:07 am
Facing this strange problem the last week or so. All agents go on pause at the same time automatically - there is no response from the server at this point. The following things happen then:
1. The customer is not able to hear the agent
2. All buttons on the VICIDIAL become 'unclickable' - cannot hangup / resume - nothing at all
Sometimes they are able to logout and re-login. Before they re-login we do a AST_resetmysqlvars just to make sure and they can continue calling for a while.
Versions used:
Asterisk : 1.2.17
VICIDIAL: 2.0.3
* Number of agents: 30 - Workstations running Fedora Core with idefisk on gsm codec
*1 asterisk server + 1 DB server - both dual core opteron with 4GB RAM and SATA HDD
* Load average < 3
* Calls going out on 2 E1 PRIs using TE205P
* No recording
* Server been running fine for over 3 months with same specs
What the logs show:
1. VNAK received by chan_iax2.c
2. full:Oct 19 10:19:58 WARNING[2756] res_agi.c: Connect failed with unexpected error: Network is unreachable
3. app_meetme.c: Unable to write frame to channel Local/8600072@default-06c3,2
4. Hangup event logged for IAX2 clients in listen.YYYY-MM-DD
We looked at the switch - didn't see anything unusual but they are regular unmanaged DAX switches.
Any assistance appreciated!
-
rajeevpn
-
- Posts: 48
- Joined: Wed Aug 16, 2006 7:42 am
by mflorell » Thu Oct 25, 2007 1:10 am
Do both servers have ntp installed and time syncing to the same NTP time server?
-
mflorell
- Site Admin
-
- Posts: 18387
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by rajeevpn » Thu Oct 25, 2007 3:00 pm
Yes - they both have NTP installed. the DB server is connected to the internet and talks to a public NTP. the asterisk server, the workstations, talk to this server to do a time sync
-
rajeevpn
-
- Posts: 48
- Joined: Wed Aug 16, 2006 7:42 am
by mflorell » Sun Oct 28, 2007 7:53 pm
Have you tried installing "mtop" to see if there is a database quesry that is sticking and locking everything up?
-
mflorell
- Site Admin
-
- Posts: 18387
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by rajeevpn » Tue Oct 30, 2007 4:37 pm
That was it!! Did an mtop and saw a report gen. query causing the problem. when we don't run reports when agents are on calls, things seem fine.
thanks matt!
-r
-
rajeevpn
-
- Posts: 48
- Joined: Wed Aug 16, 2006 7:42 am
by mflorell » Wed Oct 31, 2007 10:48 pm
I'm glad I could help, I have seen reports cause issues before at one client. In fact I have the mtop screen up on one manager's station so he can see when one of his room managers is going report-crazy
-
mflorell
- Site Admin
-
- Posts: 18387
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
Return to Support
Who is online
Users browsing this forum: mflorell and 155 guests