sip Trunk with Patton FXO VOIP Gateway

[ahmedsallam]

Good Morning Colleagues
I hope you are doing good and safe.

I need to configure SIP trunk between Vicidial and Patton FXO gateway . I have already configure it successfully with 3CX & FreePBX.

So is there any guide for trunking Vicidial with Patton FXO gateway?

Best Regards

[ambiorixg12]

Usually this gateway works in trunk mode or registration mode, if is registration mode the gateway will register to Asterisk as SIP device, and then you send calls through that SIP device, in the case of trunk mode you just create a SIP peer and send calls to that peer

[ahmedsallam]

Good ambiorixg12
Thx for your replay . Do you have any guide/example for configuring Patton or any Analog VOIP gateway with ViciDial in registration mode ?

Best Regards

[ambiorixg12]

I dont , I havent use those devices but based on what I have seems on Grandstream, OPenvox and Goip most of the FXO and GSM gateway follow this configuration mode

[ahmedsallam]

Thx for your feedback