error trying to dial out to binfone

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

error trying to dial out to binfone

Postby JosephHajek » Tue Jan 15, 2008 2:23 pm

error code.
Phone message plays invalid.
Sip phones connect fine and ring perfectly, but no ringing on outbound.
currently using manual dial.


-- Executing MeetMe("Local/8600051@default-cfcb,2", "8600051") in new stack
> Channel Local/8600051@default-cfcb,1 was answered.
== Starting Local/8600051@default-cfcb,1 at default,9338302167051,1 failed so falling back to exten 's'
== Starting Local/8600051@default-cfcb,1 at default,s,1 still failed so falling back to context 'default'
-- Sent into invalid extension 's' in context 'default' on Local/8600051@default-cfcb,1
-- Executing Playback("Local/8600051@default-cfcb,1", "invalid") in new stack
-- Playing 'invalid' (language 'en')
Jan 15 14:20:18 WARNING[5237]: file.c:1045 ast_waitstream: Unexpected control subclass '-1'
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/8600051@default-cfcb,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------)") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ----------) completed, returning 0
== Spawn extension (default, 8600051, 1) exited non-zero on 'Local/8600051@default-cfcb,2'
-- Executing DeadAGI("Local/8600051@default-cfcb,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------)") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ----------) completed, returning 0
== Manager 'sendcron' logged off from 127.0.0.1
JosephHajek
 
Posts: 9
Joined: Mon Jan 14, 2008 1:42 am

Postby amicheals » Tue Jan 15, 2008 5:57 pm

check how your leads are loaded. it may be unable to dial your leads as you have them in the hopper.

Can you dial directly from the softphone.

vicidial is set to dial 91XXXXXXXXXX so make sure your dial plan in extensions.conf is set for that.
amicheals
 
Posts: 15
Joined: Wed Dec 12, 2007 11:09 pm

your right

Postby JosephHajek » Tue Jan 15, 2008 10:36 pm

Under further investigation with Binfone's amazing support we found that It was not stripping the 9 from the call before dialing, which was making it not able to connect and instead invalid.
JosephHajek
 
Posts: 9
Joined: Mon Jan 14, 2008 1:42 am


Return to Support

Who is online

Users browsing this forum: No registered users and 152 guests