Cant get a line to dial out through my trunk

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Cant get a line to dial out through my trunk

Postby computergroove » Fri May 30, 2008 10:48 pm

Here's my cli output from the screenlog.0:

Code: Select all
vicidialnow*CLI> sip reload
 Reloading SIPI>
  == Parsing '/etc/asterisk/sip.conf': Found
May 30 23:32:04 WARNING[2648]: frame.c:1034 ast_parse_allow_disallow: Cannot allow unknown format 'g728'
May 30 23:32:04 WARNING[2648]: frame.c:1034 ast_parse_allow_disallow: Cannot allow unknown format 'g728'
  == Parsing '/etc/asterisk/sip_notify.conf': Found
  == Manager 'sendcron' logged off from 127.0.0.1
    -- Executing AGI("SIP/1001-b7a06eb0", "agi://127.0.0.1:4577/call_log") in new stack
    -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
    -- Executing Dial("SIP/1001-b7a06eb0", "SIP/16166900134@SIPtrunk|55|tTo") in new stack
    -- Called 16166900134@SIPtrunk
May 30 23:32:13 WARNING[29670]: channel.c:2781 ast_channel_make_compatible: No path to translate from SIP/SIPtrunk-098622d0(256) to SIP/1001-b7a06eb0(4)
May 30 23:32:14 WARNING[2648]: chan_sip.c:9894 handle_response_invite: Forbidden - wrong password on authentication for INVITE to '"1001" <sip:1001@192.168.1.2>;tag=as002145c0'
    -- SIP/SIPtrunk-098622d0 is circuit-busy
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing Hangup("SIP/1001-b7a06eb0", "") in new stack
  == Spawn extension (default, 16166900134, 3) exited non-zero on 'SIP/1001-b7a06eb0'
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1


I am still having the problem with a g728 codec and I do not know how to disable / remove it from the system.

Here's my sip.conf file:

Code: Select all
[general]
bindport=5060
bindaddr:=0.0.0.0
NAT=Yes,true,y,t,1,on
context=default

register => 3174:*secret*@*sipprovider*:5060


[SIPtrunk]
disallow=all
allow=g729
allow=ulaw
allow=alaw
type=friend
username=3174
secret=*SECRET*
host=*SIPPROVIDER*

[1001] ;SIP Peer
type=friend
host=dynamic
dtmfmode=rfc2833
insecure=very
disallow=all
allow=g729
allow=ulaw
allow=alaw
context=default
username=1001
secret=1234

[1002] ;SIP Peer
type=friend
host=dynamic
dtmfmode=rfc2833
insecure=very
disallow=all
allow=g729
allow=ulaw
allow=alaw
context=default
username=1002
secret=1234


[1003] ;SIP Peer
type=friend
host=dynamic
dtmfmode=rfc2833
insecure=very
disallow=all
allow=g728
allow=ulaw
allow=alaw
context=default
username=1003
secret=1234

[1004] ;SIP Peer
type=friend
host=dynamic
dtmfmode=rfc2833
insecure=very
disallow=all
allow=g729
allow=ulaw
allow=alaw
context=default
username=1004
secret=1234


and here is my extensions.conf

Code: Select all
[general]
static=yes
writeprotect=no
clearglobalvars=no

[globals]
CONSOLE=Console/dsp                             ; Console interface for demo
;TRUNK=Zap/g1                                    ; Trunk interface
;TRUNKX=Zap/g2               ; 2nd trunk interface
;TRUNKIAX=IAX2/ASTtest1:test@10.10.10.16:4569   ; IAX trunk interface
;TRUNKIAX1=IAX2/ASTtest1:test@10.10.10.16:4569   ; IAX trunk interface
;TRUNKBINFONE=IAX2/1112223333:PASSWORD@iax.binfone.com   ; IAX trunk interface
SIPtrunk=SIP/3174:*SECRET*@SIPPROVIDER:5060   ; SIP trunk
;TRUNKloop = IAX2/ASTloop:test@127.0.0.1:40569   ; used for blind monitoring
;TRUNKblind = IAX2/ASTblind:test@127.0.0.1:41569   ; used for testing

[local]
include => default

[demo]
exten => _1XXXXXXXXXX,1,agi(agi://127.0.0.1:4577/call_log)
exten => _1XXXXXXXXXX,2,Dial(SIP/${EXTEN}@SIPtrunk,55,tTo)
exten => _1XXXXXXXXXX,3,Hangup

exten => _XXXXXXX,1,agi(agi://127.0.0.1:4577/call_log)
exten => _XXXXXXX,2,Dial(SIP/${EXTEN}@SIPtrunk,55,tTo)
exten => _XXXXXXX,3,Hangup

[default]
include => demo

; BE SURE TO CHANGE THIS LINE FOR YOUR IP ADDRESS!
exten => _192*168*001*002*.,1,Goto(default,${EXTEN:16},1)
exten => _8600XXX*.,1,AGI(agi-VDADfixCXFER.agi)
exten => _78600XXX*.,1,AGI(agi-VDADfixCXFER.agi)
; Local blind monitoring
exten => _08600XXX,1,Dial(${TRUNKblind}/6${EXTEN:1},55,To)


; Example phone extensions

; Extension 2000 Sipura/Linksys ATA line 1
exten => 2000,1,Dial(sip/spa2000,30,to)   ; Ring, 30 secs max
exten => 2000,2,Voicemail,u2000           ; Send to voicemail...
; Extension 2001 Sipura/Linksys ATA line 2
exten => 2001,1,Dial(sip/spa2001,30,to)   ; Ring, 30 secs max
exten => 2001,2,Voicemail,u2001           ; Send to voicemail...
; Extension 2102 rings Grandstream phone
exten => 2102,1,Dial(sip/gs102,30,to)    ; Ring, 30 secs max
exten => 2102,2,Voicemail,u2102          ; Send to voicemail...
; Extension 401 rings the firefly softphone
exten => 401,1,Dial((IAX2/firefly01@firefly01/s||t)
exten => 401,2,Hangup

; extensions for other SIP and IAX call center phones
;   cc100-cc150 SIP Phones
exten => _1[0-5]X,1,Dial(sip/cc${EXTEN},20,to)
;   cc300-cc350 IAX Phones
exten => _3[0-5]X,1,Dial(IAX2/cc${EXTEN},20,to)

; extensions if using a T1 channelbank
exten => _19XX,1,Dial(Zap/${EXTEN:2},30,o)
exten => _19XX,2,Hangup

; Extension 4001 rings Zap phone (this example for FXS on Zap port 1)
exten => 4001,1,Dial(Zap/1,30,o)   ; ring Zap device 1
exten => 4001,2,Voicemail,u4001         ; Send to voicemail...


; # timeout invalid rules
exten => #,1,Playback(invalid)              ; "Thanks for trying the demo"
exten => #,2,Hangup                     ; Hang them up.
exten => t,1,Goto(#,1)                  ; If they take too long, give up
exten => i,1,Playback(invalid)          ; "That's not valid, try again"

; Give voicemail at extension 8500
exten => 8500,1,VoicemailMain
exten => 8500,2,Goto(s,6)

; FastAGI for VICIDIAL/astGUIclient call logging
exten => h,1,DeadAGI(agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})

; Inbound call from BINFONE
; exten => 1112223333,1,AGI(agi://127.0.0.1:4577/call_log)
; exten => 1112223333,2,Dial(sip/gs102,55,o)
; exten => 1112223333,3,Hangup

; Extension 7275551212 - Inbound local number from PRI with 10 digit delivery
exten => 7275551212,1,Ringing
exten => 7275551212,2,Wait(1)
exten => 7275551212,3,AGI(agi://127.0.0.1:4577/call_log--fullCID--${EXTEN}-----${CALLERID}-----${CALLERIDNUM}-----${CALLERIDNAME})
exten => 7275551212,4,Answer
exten => 7275551212,5,Dial(sip/spa2000&sip/spa2001,30,To)
exten => 7275551212,6,Voicemail,u2000

; dial a long distance outbound number to the UK
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls,
exten => _901144XXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _901144XXXXXXXXXX,2,Dial(${TRUNKX}/${EXTEN:1},55,To)
exten => _901144XXXXXXXXXX,3,Hangup

; dial a long distance outbound number to Australia
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls,
exten => _901161XXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _901161XXXXXXXXX,2,Dial(${TRUNKX}/${EXTEN:1},,To)
exten => _901161XXXXXXXXX,3,Hangup

; Extensions for performance testing
exten => _91999NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91999NXXXXXX,2,Dial(${TRUNKloop}/${EXTEN:2},,tTo)
exten => _91999NXXXXXX,3,Hangup
exten => 999999999999,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 999999999999,2,Dial(${TRUNKloop}/${EXTEN:1},,tTo)
exten => 999999999999,3,Hangup

; dial an 800 outbound number
exten => _91800NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91800NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91800NXXXXXX,3,Hangup
exten => _91888NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91888NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91888NXXXXXX,3,Hangup
exten => _91877NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91877NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91877NXXXXXX,3,Hangup
exten => _91866NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91866NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91866NXXXXXX,3,Hangup

; dial a local outbound number (modified because of only LD T1)
exten => _9NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9NXXXXXX,2,Dial(${TRUNK}/1727${EXTEN:1},,To)
exten => _9NXXXXXX,3,Hangup

; dial a local 727 outbound number with area code
exten => _9727NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9727NXXXXXX,2,Dial(${TRUNK}/1${EXTEN:1},,To)
exten => _9727NXXXXXX,3,Hangup

; dial a long distance outbound number
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls
exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,2,Dial(${TRUNKX}/${EXTEN:1},,To)
exten => _91NXXNXXXXXX,3,Hangup
; dial a long distance outbound number through BINFONE
; exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
; exten => _91NXXNXXXXXX,2,Dial(${TRUNKIAX}/${EXTEN},55,To)
; exten => _91NXXNXXXXXX,3,Hangup
; dial a long distance outbound number through a SIP provider
; exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
; exten => _91NXXNXXXXXX,2,Dial(sip/${EXTEN}@SIPtrunk,55,o)
; exten => _91NXXNXXXXXX,3,Hangup

; parameters for call_inbound.agi (7 fields separated by five dashes "-----"):
; 1. the extension of the phone to ring as defined in the asterisk.phones table
; 2. the phone number that was called, for the live_inbound/_log entry
; 3. a text description of the number that was called in
; 4-7. optional fields, they are also passed as fields in the GUI to web browser
; This is not part of VICIDIAL, it is for astGUIclient agent use only

; Extension 3429 - Inbound 800 number (1-800-555-3429) example of RBS T1
;    with 10 digit ANI and 4 digit DNIS star separated
exten => _**3429,1,Ringing
exten => _**3429,2,AGI(agi://127.0.0.1:4577/call_log)
exten => _**3429,3,AGI(call_inbound.agi,spa2000-----8005553429-----Inbound 800-----x-----y-----z-----w)
exten => _**3429,4,Answer
exten => _**3429,5,Dial(sip/spa2000&sip/spa2001,30,to)
exten => _**3429,6,Voicemail,u2000
; Extension 3429 - with ANI [callerID]
exten => _*NXXNXXXXXX*3429,1,Ringing
exten => _*NXXNXXXXXX*3429,2,AGI(agi://127.0.0.1:4577/call_log)
exten => _*NXXNXXXXXX*3429,3,AGI(call_inbound.agi,spa2000-----8005553429-----Inbound 800-----x-----y-----z-----w)
exten => _*NXXNXXXXXX*3429,4,Answer
exten => _*NXXNXXXXXX*3429,5,Dial(sip/spa2000&sip/spa2001,30,to)
exten => _*NXXNXXXXXX*3429,6,Voicemail,u2000


; parameters for agi-VDAD_ALL_inbound.agi (9 fields separated by five dashes "-----"):
;  1. the method of call handling for the script:
;    - CID -    CID received, add record with phone number
;    - CIDLOOKUP -    Lookup CID to find record in whole system
;    - CIDLOOKUPRL -   Restrict lookup to one list
;    - CIDLOOKUPRC -   Restrict lookup to one campaign's lists
;   - CLOSER -      Closer calls from VICIDIAL fronters
;    - ANI -    ANI received, add record with phone number
;    - ANILOOKUP -    Lookup ANI to find record in whole system
;    - ANILOOKUPRL -   Restrict lookup to one list
;    - 3DIGITID -    Enter 3 digit code to go to agent
;    - 4DIGITID -    Enter 4 digit code to go to agent
;    - 5DIGITID -    Enter 5 digit code to go to agent
;    - 10DIGITID -    Enter 10 digit code to go to agent
; 2. the method of searching for an available agent:
;    - LO - Load Balance Overflow only (priority to home server)
;    - LB - <default> Load Balance total system
;    - SO - Home server only
; 3. the full name of the IN GROUP to be used in vicidial for the inbound call
; 4. the phone number that was called, for the log entry
; 5. the callerID or lead_id of the person that called(usually overridden)
; 6. the park extension audio file name if used
; 7. the status of the call initially(usually not used)
; 8. the list_id to insert the new lead under if it is new (and CID/ANI available)
; 9. the phone dialing code to insert with the new lead if new (and CID/ANI available)
; 10. the campaign_id to search within lists if CIDLOOKUPRC
; inbound VICIDIAL call with CID delivery through T1 PRI
exten => 1234,1,Answer                  ; Answer the line
exten => 1234,2,AGI(agi-VDAD_ALL_inbound.agi,CID-----LB-----CL_GALLERIA-----7274515134-----Closer-----park----------999-----1)
exten => 1234,3,Hangup

; inbound VICIDIAL transfer calls [can arrive through PRI T1 crossover, IAX or SIP channel]
exten => _90009.,1,Answer                  ; Answer the line
exten => _90009.,2,AGI(agi-VDAD_ALL_inbound.agi,CLOSER-----LB-----CL_TESTCAMP-----7275551212-----Closer-----park----------999-----1)
exten => _90009.,3,Hangup
exten => _990009.,1,Answer                  ; Answer the line
exten => _990009.,2,AGI(agi-VDAD_ALL_inbound.agi,CLOSER-----LB-----CL_TESTCAMP-----7275551212-----Closer-----park----------999-----1)
exten => _990009.,3,Hangup


; barge monitoring extension
exten => 8159,1,ZapBarge
exten => 8159,2,Hangup

; ZapBarge direct channel extensions
exten => _86120XX,1,ZapBarge(${EXTEN:5})


exten => _X48600XXX,1,MeetMeAdmin(${EXTEN:2},T,${EXTEN:0:1})
exten => _X48600XXX,2,Hangup

exten => _X38600XXX,1,MeetMeAdmin(${EXTEN:2},t,${EXTEN:0:1})
exten => _X38600XXX,2,Hangup

exten => _X28600XXX,1,MeetMeAdmin(${EXTEN:2},m,${EXTEN:0:1})
exten => _X28600XXX,2,Hangup

exten => _X18600XXX,1,MeetMeAdmin(${EXTEN:2},M,${EXTEN:0:1})
exten => _X18600XXX,2,Hangup

exten => _55558600XXX,1,MeetMeAdmin(${EXTEN:4},K)
exten => _55558600XXX,2,Hangup
exten => 8300,1,Hangup

; astGUIclient conferences
exten => _86000[0-4]X,1,Meetme,${EXTEN}|q
; VICIDIAL conferences
exten => _86000[5-9]X,1,Meetme,${EXTEN}|F
exten => _86001XX,1,Meetme,${EXTEN}|F
exten => _8600200,1,Meetme,${EXTEN}|F
; quiet entry and leaving conferences for VICIDIAL
exten => _78600XXX,1,Meetme,${EXTEN:1}|Fq
; quiet monitor extensions for meetme rooms (for room managers)
exten => _68600XXX,1,Meetme,${EXTEN:1}|Fmq

; voicelab exten
exten => _86009XX,1,Meetme,${EXTEN}|Fmq
; voicelab exten moderator
exten => _986009XX,1,Meetme,${EXTEN:1}



; park channel for client GUI parking, hangup after 30 minutes
;    create a GSM formatted audio file named "park.gsm" that is 30 minutes long
;    and put it in /var/lib/asterisk/sounds
exten => 8301,1,Answer
exten => 8301,2,AGI(park_CID.agi)
exten => 8301,3,Playback(park)
exten => 8301,4,Hangup
exten => 8303,1,Answer
exten => 8303,2,AGI(park_CID.agi)
exten => 8303,3,Playback(conf)
exten => 8303,4,Hangup

; park channel for client GUI conferencing, hangup after 30 minutes
;    create a GSM formatted audio file named "conf.gsm" that is 30 minutes long
;    and put it in /var/lib/asterisk/sounds
exten => 8302,1,Answer
exten => 8302,2,Playback(conf)
exten => 8302,3,Hangup

exten => 8304,1,Answer
exten => 8304,2,Playback(ding)
exten => 8304,3,Hangup

; default audio for safe harbor 2-second-after-hello message then hangup
;    create a GSM formatted audio file complies with safe harbor rules
;    and put it in /var/lib/asterisk/sounds then change filename below
exten => 8307,1,Answer
exten => 8307,2,Playback(vm-goodbye)
exten => 8307,3,Hangup

; this is used for recording conference calls, the client app sends the filename
;    value as a callerID recordings go to /var/spool/asterisk/monitor (WAV)
;    Recording is limited to 1 hour, to make longer, just change the Wait,3600
exten => 8309,1,Answer
exten => 8309,2,Monitor(wav,${CALLERIDNAME})
exten => 8309,3,Wait,3600
exten => 8309,4,Hangup

; this is used for recording conference calls, the client app sends the filename
;    value as a callerID recordings go to /var/spool/asterisk/monitor (GSM)
;    Recording is limited to 1 hour, to make longer, just change the Wait,3600
exten => 8310,1,Answer
exten => 8310,2,Monitor(gsm,${CALLERIDNAME})
exten => 8310,3,Wait,3600
exten => 8310,4,Hangup

; this is used for playing a message to an answering machine forwarded from AMD in VICIDIAL
;    replace conf with the message file you want to leave
exten => 8320,1,WaitForSilence(2000,2) ; AMD got machine.  leave message after recording
exten => 8320,2,Playback(conf)
exten => 8320,3,AGI(VD_amd_post.agi,${EXTEN})
exten => 8320,4,Hangup

; use for selective CallerID hangup by area code(hard-coded)
exten => 8352,1,AGI(agi-VDADselective_CID_hangup.agi,${EXTEN})
exten => 8352,2,Playback(safe_harbor)
exten => 8352,3,Hangup

; prompts for recording AGI script, ID is 4321
; first variable is format (gsm/wav)
; second variable is timeout in milliseconds (default is 720000 [12 minutes])
exten => 8167,1,Answer
exten => 8167,2,AGI(agi-record_prompts.agi,wav-----720000)
exten => 8167,3,Hangup
exten => 8168,1,Answer
exten => 8168,2,AGI(agi-record_prompts.agi,gsm-----720000)
exten => 8168,3,Hangup

; playback of recorded prompts
exten => _851XXXXX,1,Answer
exten => _851XXXXX,2,Playback(${EXTEN})
exten => _851XXXXX,3,Hangup

; this is used to allow the GUI to send you directly into voicemail
;     don't forget to set GUI variable $voicemail_exten to this extension
exten => 8501,1,VoicemailMain(s${CALLERIDNUM})
exten => 8501,2,Hangup

; this is used to allow the GUI to send live calls directly into voicemail
;     don't forget to set GUI variable $voicemail_dump_exten to this extension
exten => _85026666666666.,1,Wait(2)
exten => _85026666666666.,2,Voicemail(${EXTEN:14})
exten => _85026666666666.,3,Hangup

; this is used for sending DTMF signals within conference calls, the client app
;    sends the digits to be played in the callerID field
;    sound files must be placed in /var/lib/asterisk/sounds
exten => 8500998,1,Answer
exten => 8500998,2,Playback(silence)
exten => 8500998,3,AGI(agi-dtmf.agi)
exten => 8500998,4,Hangup

;#### VDAD STANDARD TRANSFER ENTRIES ####
; VICIDIAL_auto_dialer transfer script for no-agent campaigns:
exten => 8364,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8364,2,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
exten => 8364,3,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
exten => 8364,4,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
exten => 8364,5,Hangup

; VICIDIAL_auto_dialer transfer script:
exten => 8365,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8365,2,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,3,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,4,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,5,Hangup

; VICIDIAL_auto_dialer transfer script SURVEY at beginning:
exten => 8366,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8366,2,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
exten => 8366,3,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
exten => 8366,4,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
exten => 8366,5,Hangup

; VICIDIAL_auto_dialer transfer script Load Balance Overflow:
exten => 8367,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8367,2,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
exten => 8367,3,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
exten => 8367,4,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
exten => 8367,5,Hangup

; VICIDIAL_auto_dialer transfer script Load Balanced:
exten => 8368,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8368,2,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8368,3,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8368,4,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8368,5,Hangup

; VICIDIAL_auto_dialer transfer script AMD with Load Balanced:
exten => 8369,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8369,2,AMD(2000|2000|1000|5000|120|50|4|256)
exten => 8369,3,AGI(VD_amd.agi,${EXTEN})
exten => 8369,4,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8369,5,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8369,6,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8369,7,Hangup

; VICIDIAL auto-dial reminder script
exten => 8372,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8372,2,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,3,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,4,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,5,Hangup

;#### VDAD SIP UNREGISTERED TRANSFER ENTRIES ####
;#### Use these entries IN PLACE OF the entries above if you are using SIP trunks
;#### and are not registering your provider in sip.conf
;; VICIDIAL_auto_dialer transfer script for no-agent campaigns:
;exten => 8364,1,Playback(sip-silence)
;exten => 8364,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8364,3,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
;exten => 8364,4,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
;exten => 8364,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script:
;exten => 8365,1,Playback(sip-silence)
;exten => 8365,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8365,3,AGI(agi-VDADtransfer.agi,${EXTEN})
;exten => 8365,4,AGI(agi-VDADtransfer.agi,${EXTEN})
;exten => 8365,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script SURVEY at beginning:
;exten => 8366,1,Playback(sip-silence)
;exten => 8366,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8366,3,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
;exten => 8366,4,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
;exten => 8366,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script Load Balance Overflow:
;exten => 8367,1,Playback(sip-silence)
;exten => 8367,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8367,3,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
;exten => 8367,4,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
;exten => 8367,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script Load Balanced:
;exten => 8368,1,Playback(sip-silence)
;exten => 8368,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8368,3,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8368,4,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8368,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script AMD with Load Balanced:
;exten => 8369,1,Playback(sip-silence)
;exten => 8369,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8369,3,AMD(2000|2000|1000|5000|120|50|4|256)
;exten => 8369,4,AGI(VD_amd.agi,${EXTEN})
;exten => 8369,5,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8369,6,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8369,7,Hangup
;
;; VICIDIAL auto-dial reminder script
;exten => 8372,1,Playback(sip-silence)
;exten => 8372,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8372,3,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
;exten => 8372,4,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
;exten => 8372,5,Hangup



; PERFORMANCE TESTING
exten => _999XXXXXX1,1,Answer
exten => _999XXXXXX1,2,Wait(2)
exten => _999XXXXXX1,3,Playback(beep)
exten => _999XXXXXX1,4,Hangup

exten => _999XXXX112,1,Wait(8)
exten => _999XXXX112,2,Answer
exten => _999XXXX112,3,Playback(demo-instruct)
exten => _999XXXX112,4,Playback(demo-instruct)
exten => _999XXXX112,5,Hangup

exten => _999XXXXXX2,1,Wait(8)
exten => _999XXXXXX2,2,Answer
exten => _999XXXXXX2,3,Playback(demo-instruct)
exten => _999XXXXXX2,4,Hangup

exten => _999XXXXXX3,1,SetVar(PRI_CAUSE=1)
exten => _999XXXXXX3,2,Hangup

exten => _999XXXXXX4,1,SetVar(PRI_CAUSE=27)
exten => _999XXXXXX4,2,Hangup

exten => _999XXXXXX5,1,Wait(60)
exten => _999XXXXXX5,2,Hangup

exten => _999XXXXXX6,1,Wait(10)
exten => _999XXXXXX6,2,Answer
exten => _999XXXXXX6,3,Playback(demo-instruct)
exten => _999XXXXXX6,4,Hangup

exten => _999XXXXXX7,1,Wait(12)
exten => _999XXXXXX7,2,Answer
exten => _999XXXXXX7,3,Playback(demo-enterkeywords)
exten => _999XXXXXX7,4,Hangup

exten => _999XXXXXX8,1,SetVar(PRI_CAUSE=17)
exten => _999XXXXXX8,2,Hangup

exten => _999XXXXXX9,1,Wait(6)
exten => _999XXXXXX9,2,Answer
exten => _999XXXXXX9,3,Playback(demo-abouttotry)
exten => _999XXXXXX9,4,Hangup

exten => _999XXXXXX0,1,Wait(5)
exten => _999XXXXXX0,2,Answer
exten => _999XXXXXX0,3,Playback(vm-goodbye)
exten => _999XXXXXX0,4,Hangup

exten => 99999999999,1,Answer
exten => 99999999999,2,Playback(conf)
exten => 99999999999,3,Playback(conf)
exten => 99999999999,4,Playback(conf)
exten => 99999999999,5,Playback(conf)
exten => 99999999999,6,Playback(conf)
exten => 99999999999,7,Playback(conf)
exten => 99999999999,8,Playback(conf)
exten => 99999999999,9,Playback(conf)
exten => 99999999999,10,Playback(conf)
exten => 99999999999,11,Playback(conf)
exten => 99999999999,12,Playback(conf)
exten => 99999999999,13,Playback(conf)
exten => 99999999999,14,Hangup

[/code]
computergroove
 
Posts: 59
Joined: Sat Dec 29, 2007 5:24 pm

Postby mflorell » Sat May 31, 2008 3:17 am

What carrier are you using that allows G728?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby computergroove » Sat May 31, 2008 9:03 am

They dont. I found a typo in sip.conf in line [1003].
computergroove
 
Posts: 59
Joined: Sat Dec 29, 2007 5:24 pm


Return to Support

Who is online

Users browsing this forum: Google [Bot] and 92 guests