Phone card(s) and phone harware to work with telco line

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

Phone card(s) and phone harware to work with telco line

Postby webgurru » Tue Jun 09, 2009 3:05 pm

Hi,

I have successfully installed and tested VCDIALNOW for SIP. Once testing is finished, we tried to find SDSL and VOIP providers. With a hard work of about 2 weeks we conclude we can't get any cheap solution available in UK. We can get good deal on minutes and rental for telco lines but not for SIP. So I don't have any choice except to move on telco solution. I am good in computer hardware and software but not too good in phone cards and phone systems. Now I have to decide phone card(s) and phone system required to work with telco lines. At present I have setup VICIDIALNOW on Dell D380 G4 2x3.6 with 4GB RAM and 6x72GB hard drives. At first stage we want to start with 15-20 seats, afterward wants to update up to 50. I want to know which phone card and phone system I have to purchase to work with ISDN 30 and VICIDIALNOW. Can I do this with ease or have to do a lot?. I really don't want to buy any hardware which is not compatible with VICIDIAL and need update again.

Best regards
webgurru
 
Posts: 147
Joined: Thu May 07, 2009 11:10 am
Location: United Kingdom

Postby marcin » Wed Jun 10, 2009 4:40 pm

Have you look in to a US based sip termination providers?
We use 3utelecom for outbound and vitelity.net as backup and for inbound calls.
Check them up.
marcin
 
Posts: 95
Joined: Wed Mar 18, 2009 8:00 am

Postby webgurru » Wed Jun 10, 2009 5:05 pm

marcin wrote:Have you look in to a US based sip termination providers?
We use 3utelecom for outbound and vitelity.net as backup and for inbound calls.
Check them up.


Thanks. Our main problem is SDSL line, for 2MB SDSL line with backup they are asking for £1000 installation and £450+VAT/month and minutes are on the top of it. While with ISDN 30 unlimited landline calls and 7p/min mobile for only £400/month with no setup cost.
webgurru
 
Posts: 147
Joined: Thu May 07, 2009 11:10 am
Location: United Kingdom

Postby gardo » Thu Jun 11, 2009 10:48 am

We recommend getting E1/T1 telephony cards from Sangoma (http://www.sangoma.com). How many E1/T1 lines are you going to use?
http://goautodial.com
Empowering the next generation contact centers
gardo
 
Posts: 1926
Joined: Fri Sep 15, 2006 10:24 am
Location: Manila, 1004

Postby marcin » Thu Jun 11, 2009 2:46 pm

How many agents are you planning to have ? Are they remote or in your location?
You may be best with outsourcing.
marcin
 
Posts: 95
Joined: Wed Mar 18, 2009 8:00 am

Postby webgurru » Fri Jun 12, 2009 4:33 am

gardo wrote:We recommend getting E1/T1 telephony cards from Sangoma (http://www.sangoma.com). How many E1/T1 lines are you going to use?


Thanks Gardo, we are going to use 2 ISDN 30 lines.

Best regards,
webgurru
 
Posts: 147
Joined: Thu May 07, 2009 11:10 am
Location: United Kingdom

Postby webgurru » Fri Jun 12, 2009 4:35 am

marcin wrote:How many agents are you planning to have ? Are they remote or in your location?
You may be best with outsourcing.


Dear Marcin, I have already told in start we are looking for 15-20 which will be 50 in about 6 months time. All will be inhouse no remote.

Best regards,
webgurru
 
Posts: 147
Joined: Thu May 07, 2009 11:10 am
Location: United Kingdom

Postby gardo » Fri Jun 12, 2009 2:43 pm

Get the Sangoma A102D card. It has 2 ports for E1/T1/J1. If you're planning to expand, get the A104D. Checkout their website at http://www.sangoma.com.

webgurru wrote:
gardo wrote:We recommend getting E1/T1 telephony cards from Sangoma (http://www.sangoma.com). How many E1/T1 lines are you going to use?


Thanks Gardo, we are going to use 2 ISDN 30 lines.

Best regards,
http://goautodial.com
Empowering the next generation contact centers
gardo
 
Posts: 1926
Joined: Fri Sep 15, 2006 10:24 am
Location: Manila, 1004

Postby webgurru » Mon Jun 15, 2009 4:26 am

gardo wrote:Get the Sangoma A102D card. It has 2 ports for E1/T1/J1. If you're planning to expand, get the A104D. Checkout their website at http://www.sangoma.com.


Thanks Gardo, I looked into cards and will request to buy one. One more thing should I require any other harware like phone system to plugin my phones? If so, for which should I go for?

Best regards,
webgurru
 
Posts: 147
Joined: Thu May 07, 2009 11:10 am
Location: United Kingdom

Postby gardo » Tue Jun 16, 2009 3:07 am

One of the most cost-effective solution for startup call centers is to get ATAs (analog telephone adapters) coupled with a handset/headset device. You can check your area and see what brands are available. We usually go with the Linksys PAP-2T.
http://goautodial.com
Empowering the next generation contact centers
gardo
 
Posts: 1926
Joined: Fri Sep 15, 2006 10:24 am
Location: Manila, 1004


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: No registered users and 51 guests