Configuration of 2 IPs in Server

Support forum for the ViciBox ISO Server Install and ISO LiveCD Demo

Moderators: enjay, williamconley, Staydog, mflorell, MJCoate, mcargile, Kumba

Configuration of 2 IPs in Server

Postby joylovebasu » Sat Jul 04, 2009 3:02 am

How to configure 2 IPs.. One Static and another Local IP on the vicibox ?
------------------------------
VERSION: 2.0.5-173
BUILD: 90320-0424
joylovebasu
 
Posts: 127
Joined: Tue Jun 09, 2009 11:13 am

Postby joylovebasu » Sun Jul 05, 2009 7:11 pm

Any suggestions ?
joylovebasu
 
Posts: 127
Joined: Tue Jun 09, 2009 11:13 am

Postby okli » Mon Jul 06, 2009 12:45 am

/etc/network/interfaces


example:
Code: Select all
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#allow-hotplug eth0
auto eth0
iface eth0 inet static
   #pre-up /usr/sbin/ethtool -s eth0 speed 100 duplex full autoneg off
        address XXX.XXX.XXX.XXX
        netmask XXX.XXX.XXX.XXX
        network XXX.XXX.XXX.XXX
        broadcast XXX.XXX.XXX.XXX
        gateway XXX.XXX.XXX.XXX
      
auto eth1
iface eth1 inet static
#       pre-up /usr/sbin/ethtool -s eth1 speed 100 duplex full autoneg off
       address 10.17.17.4
       netmask 255.255.255.0
       network 10.17.17.0
       broadcast 10.17.17.255
       up route add -net 10.17.17.0 netmask 255.255.255.0 dev eth1
       down route del -net 10.17.17.0 netmask 255.255.255.0 dev eth1


http://www.google.com/search?hl=en&q=co ... 9&ie=UTF-8
okli
 
Posts: 671
Joined: Mon Oct 01, 2007 5:09 pm


Return to ViciBox Server Install and Demo

Who is online

Users browsing this forum: No registered users and 54 guests