strange message on cli

[kpanik]

Hi all,

I see in the cli this messages ...

Sep 28 21:11:02 NOTICE[21461]: app_dial.c:1056 dial_exec_full: Unable to create channel of type 'Zap' (cause 34 - Circuit/channel congestion)
== Everyone is busy/congested at this time (1:0/1/0)

it can be a problem ?

I try a insert a wait (4) before hangup, but this message not change.

I use asterisk 1.2.12.1, zaptel 1.2.9.1, libpri 1.2.3, asterisk-addons 1.2.4

TE410P digium 4 PRI

server : Vicidial - asterisk 2 xeon 3200 Mhz , 3 GB RAM, raid 1 sata 2

Any suggestion ?

[kpanik]

i'm sorry...

they are forgotten to me

Sep 28 22:21:31 WARNING[6922]: res_agi.c:1924 run_agi: unable to send SIGHUP to AGI process 9328: No such process
Sep 28 22:23:01 WARNING[3603]: chan_zap.c:2287 pri_find_dchan: No D-channels available! Using Primary channel 109 as D-channel anyway!
stweb*CLI>
Sep 28 22:21:02 WARNING[6412]: file.c:587 ast_readaudio_callback: Failed to write frame


???

[mflorell]

How many and what kind of circuits do you have hooked up to your quad T1/E1 card?

What is the output of zttool?

[enjay]

i'm sorry...

they are forgotten to me

Sep 28 22:21:31 WARNING[6922]: res_agi.c:1924 run_agi: unable to send SIGHUP to AGI process 9328: No such process
Sep 28 22:23:01 WARNING[3603]: chan_zap.c:2287 pri_find_dchan: No D-channels available! Using Primary channel 109 as D-channel anyway!
stweb*CLI>
Sep 28 22:21:02 WARNING[6412]: file.c:587 ast_readaudio_callback: Failed to write frame


???

Those arent necessarily errors. not sure what the first one is the second one appears to be a trunk group config deal. Do you share D's between two PRI's? (i.e. 24 B,s 23B's & 1 D) ?

-enjay

[kpanik]

I have hooked 4 span E1 pri

this is my zapte.conf

span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
span=2,1,0,ccs,hdb3,crc4
bchan=32-46
dchan=47
bchan=48-62
span=3,1,0,ccs,hdb3,crc4
bchan=63-77
dchan=78
bchan=79-93
span=4,1,0,ccs,hdb3,crc4
bchan=94-108
dchan=109
bchan=110-124
loadzone=it
defaultzone=it

[kpanik]

no suggestion on this problem?

[mflorell]

As I asked before:

"What is the output of zttool?"

[gerski]

in Digium TE410P do you set the jumper to use E1?

Span1 Span 2 etc..


1 3

2 4

you must put the appropriate jumper to the specific span.. e.g. if you put the jumper on 1 - 2 it will use span1 -> E1

[kpanik]

My zttol is ok ... I setting alla span on E1

[gerski]

maybe something wrong connecting your E1 to PRI, does one of your E1 already working?

can you please post your dmesg for zaptel? and also the output when you type ztcfg -vvvvvvvvvvv

[kpanik]

my dmesg for zaptel and wct4xxp

Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.9.1 Echo Canceller: KB1
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 24 (level, low) -> IRQ 18
Found TE4XXP at base address dd200000, remapped to f8b76000
TE4XXP version c01a0164, burst OFF, slip debug: OFF
FALC version: 00000005, Board ID: 00
Reg 0: 0x35c3c400
Reg 1: 0x35c3c000
Reg 2: 0xffffffff
Reg 3: 0x00000000
Reg 4: 0x00000001
Reg 5: 0x00000000
Reg 6: 0xc01a0164
Reg 7: 0x00001f00
Reg 8: 0x000200ff
Reg 9: 0x00fd0000
Reg 10: 0x00000000
TE4XXP: Launching card: 0
TE4XXP: Setting up global serial parameters
Found a Wildcard: Wildcard TE410P (2nd Gen)
TE4XXP: Disabling interrupts since there are no active spans
TE4XXP: Disabling interrupts since there are no active spans
TE4XXP: Disabling interrupts since there are no active spans
TE4XXP: Disabling interrupts since there are no active spans
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
Registered tone zone 11 (Italy)
About to enter startup!
TE4XXP: Span 1 configured for CCS/HDB3/CRC4
wct4xxp: Setting yellow alarm on span 1
VPM400: Span 0 A-law mode
VPM: DTMF threshold set to 1000
VPM400: Span 1 A-law mode
VPM: DTMF threshold set to 1000
VPM400: Span 2 A-law mode
VPM: DTMF threshold set to 1000
VPM400: Span 3 A-law mode
VPM: DTMF threshold set to 1000
VPM: DTMF threshold set to 1000
VPM: DTMF threshold set to 1000
VPM: DTMF threshold set to 1000
VPM: DTMF threshold set to 1000
VPM400: hardware DTMF enabled.
VPM400 (2nd Gen): Present and operational servicing 4 span(s)
Completed startup!
About to enter startup!
TE4XXP: Span 2 configured for CCS/HDB3/CRC4
wct4xxp: Setting yellow alarm on span 2
Completed startup!
About to enter startup!
TE4XXP: Span 3 configured for CCS/HDB3/CRC4
wct4xxp: Setting yellow alarm on span 3
Completed startup!
About to enter startup!
TE4XXP: Span 4 configured for CCS/HDB3/CRC4
wct4xxp: Setting yellow alarm on span 4
Completed startup!
wct4xxp: Clearing yellow alarm on span 1
wct4xxp: Clearing yellow alarm on span 2
wct4xxp: Clearing yellow alarm on span 3
wct4xxp: Clearing yellow alarm on span 4

[kpanik]

and this .... ztcfg -vvv

Zaptel Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 3: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 4: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
Channel 32: Clear channel (Default) (Slaves: 32)
Channel 33: Clear channel (Default) (Slaves: 33)
Channel 34: Clear channel (Default) (Slaves: 34)
Channel 35: Clear channel (Default) (Slaves: 35)
Channel 36: Clear channel (Default) (Slaves: 36)
Channel 37: Clear channel (Default) (Slaves: 37)
Channel 38: Clear channel (Default) (Slaves: 38)
Channel 39: Clear channel (Default) (Slaves: 39)
Channel 40: Clear channel (Default) (Slaves: 40)
Channel 41: Clear channel (Default) (Slaves: 41)
Channel 42: Clear channel (Default) (Slaves: 42)
Channel 43: Clear channel (Default) (Slaves: 43)
Channel 44: Clear channel (Default) (Slaves: 44)
Channel 45: Clear channel (Default) (Slaves: 45)
Channel 46: Clear channel (Default) (Slaves: 46)
Channel 47: D-channel (Default) (Slaves: 47)
Channel 48: Clear channel (Default) (Slaves: 48)
Channel 49: Clear channel (Default) (Slaves: 49)
Channel 50: Clear channel (Default) (Slaves: 50)
Channel 51: Clear channel (Default) (Slaves: 51)
Channel 52: Clear channel (Default) (Slaves: 52)
Channel 53: Clear channel (Default) (Slaves: 53)
Channel 54: Clear channel (Default) (Slaves: 54)
Channel 55: Clear channel (Default) (Slaves: 55)
Channel 56: Clear channel (Default) (Slaves: 56)
Channel 57: Clear channel (Default) (Slaves: 57)
Channel 58: Clear channel (Default) (Slaves: 58)
Channel 59: Clear channel (Default) (Slaves: 59)
Channel 60: Clear channel (Default) (Slaves: 60)
Channel 61: Clear channel (Default) (Slaves: 61)
Channel 62: Clear channel (Default) (Slaves: 62)
Channel 63: Clear channel (Default) (Slaves: 63)
Channel 64: Clear channel (Default) (Slaves: 64)
Channel 65: Clear channel (Default) (Slaves: 65)
Channel 66: Clear channel (Default) (Slaves: 66)
Channel 67: Clear channel (Default) (Slaves: 67)
Channel 68: Clear channel (Default) (Slaves: 68)
Channel 69: Clear channel (Default) (Slaves: 69)
Channel 70: Clear channel (Default) (Slaves: 70)
Channel 71: Clear channel (Default) (Slaves: 71)
Channel 72: Clear channel (Default) (Slaves: 72)
Channel 73: Clear channel (Default) (Slaves: 73)
Channel 74: Clear channel (Default) (Slaves: 74)
Channel 75: Clear channel (Default) (Slaves: 75)
Channel 76: Clear channel (Default) (Slaves: 76)
Channel 77: Clear channel (Default) (Slaves: 77)
Channel 78: D-channel (Default) (Slaves: 78)
Channel 79: Clear channel (Default) (Slaves: 79)
Channel 80: Clear channel (Default) (Slaves: 80)
Channel 81: Clear channel (Default) (Slaves: 81)
Channel 82: Clear channel (Default) (Slaves: 82)
Channel 83: Clear channel (Default) (Slaves: 83)
Channel 84: Clear channel (Default) (Slaves: 84)
Channel 85: Clear channel (Default) (Slaves: 85)
Channel 86: Clear channel (Default) (Slaves: 86)
Channel 87: Clear channel (Default) (Slaves: 87)
Channel 88: Clear channel (Default) (Slaves: 88)
Channel 89: Clear channel (Default) (Slaves: 89)
Channel 90: Clear channel (Default) (Slaves: 90)
Channel 91: Clear channel (Default) (Slaves: 91)
Channel 92: Clear channel (Default) (Slaves: 92)
Channel 93: Clear channel (Default) (Slaves: 93)
Channel 94: Clear channel (Default) (Slaves: 94)
Channel 95: Clear channel (Default) (Slaves: 95)
Channel 96: Clear channel (Default) (Slaves: 96)
Channel 97: Clear channel (Default) (Slaves: 97)
Channel 98: Clear channel (Default) (Slaves: 98)
Channel 99: Clear channel (Default) (Slaves: 99)
Channel 100: Clear channel (Default) (Slaves: 100)
Channel 101: Clear channel (Default) (Slaves: 101)
Channel 102: Clear channel (Default) (Slaves: 102)
Channel 103: Clear channel (Default) (Slaves: 103)
Channel 104: Clear channel (Default) (Slaves: 104)
Channel 105: Clear channel (Default) (Slaves: 105)
Channel 106: Clear channel (Default) (Slaves: 106)
Channel 107: Clear channel (Default) (Slaves: 107)
Channel 108: Clear channel (Default) (Slaves: 108)
Channel 109: D-channel (Default) (Slaves: 109)
Channel 110: Clear channel (Default) (Slaves: 110)
Channel 111: Clear channel (Default) (Slaves: 111)
Channel 112: Clear channel (Default) (Slaves: 112)
Channel 113: Clear channel (Default) (Slaves: 113)
Channel 114: Clear channel (Default) (Slaves: 114)
Channel 115: Clear channel (Default) (Slaves: 115)
Channel 116: Clear channel (Default) (Slaves: 116)
Channel 117: Clear channel (Default) (Slaves: 117)
Channel 118: Clear channel (Default) (Slaves: 118)
Channel 119: Clear channel (Default) (Slaves: 119)
Channel 120: Clear channel (Default) (Slaves: 120)
Channel 121: Clear channel (Default) (Slaves: 121)
Channel 122: Clear channel (Default) (Slaves: 122)
Channel 123: Clear channel (Default) (Slaves: 123)
Channel 124: Clear channel (Default) (Slaves: 124)

124 channels configured.