I am sorry that is not a valid exten pls try again

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

I am sorry that is not a valid exten pls try again

Postby rohitrmenon » Mon Nov 30, 2009 9:32 am

hi there, I am facing some problem wile i dialing out...when i tried to call from x-lite it will go through once i upload leads it is going giving error saying "I AM SORRY THAT IS NOT A VALID EXTENTION"
My CLI is
Executing MeetMe("Local/8600051@default-dd3b,2", "8600051|F") in new stack
> Channel Local/8600051@default-dd3b,1 was answered.
== Starting Local/8600051@default-dd3b,1 at default,1XXXXXXXXXX,1 failed so falling back to exten 's'
== Starting Local/8600051@default-dd3b,1 at default,s,1 still failed so falling back to context 'default'
-- Sent into invalid extension 's' in context 'default' on Local/8600051@default-dd3b,1
-- Executing Playback("Local/8600051@default-dd3b,1", "invalid") in new stack
-- Playing 'invalid' (language 'en')
Nov 30 19:55:36 WARNING[7883]: file.c:1045 ast_waitstream: Unexpected control subclass '-1'
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing MeetMe("Local/58600051@default-94f8,2", "8600051|Fmq") in new stack
> Channel Local/58600051@default-94f8,1 was answered.
-- Executing Answer("Local/58600051@default-94f8,1", "") in new stack
-- Executing Monitor("Local/58600051@default-94f8,1", "wav|20091130-195535_XXXXXXXXXX") in new stack
-- Executing Wait("Local/58600051@default-94f8,1", "3600") in new stack
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1


Please help me
rohitrmenon
 
Posts: 24
Joined: Mon Nov 30, 2009 8:41 am

Postby gmcust3 » Mon Nov 30, 2009 12:11 pm

Post DETAILS abt yr SET UP first .

But problem is your Carier config issues.
GoAutoDial CE
VERSION: 2.4-309a
BUILD: 110430-1642
No other software installed on the box.
I've read the manager manual.
gmcust3
 
Posts: 1148
Joined: Sat Oct 24, 2009 1:15 pm

Postby rohitrmenon » Mon Nov 30, 2009 12:21 pm

if there any problem with the carrier it won't able make call from Xlite rt ?
here i am able to make call from Xlite......
here is my setup for Carrier

Account Entry:

[XXXXX]
disallow=all
allow=alaw
allow=ulaw
type=friend
username=XXXXX
secret=my secret
host=my sip provider
dtmfmode=inband
context=trunkoutbound
qualify=1000

Globals String:
SIPtrunk = SIP/XXXXX

Dialplan Entry:
exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,2,Dial(${SIPtrunk}/${EXTEN:1},55,o)
exten => _91NXXNXXXXXX,3,Hangup


Host Username Refresh State
my sip provider:5060 XXXXX 105 Registered

Let me know anything els u need
rohitrmenon
 
Posts: 24
Joined: Mon Nov 30, 2009 8:41 am

Postby gmcust3 » Mon Nov 30, 2009 7:14 pm

REPEAT : POST YOUR SET UP DETAILS
GoAutoDial CE
VERSION: 2.4-309a
BUILD: 110430-1642
No other software installed on the box.
I've read the manager manual.
gmcust3
 
Posts: 1148
Joined: Sat Oct 24, 2009 1:15 pm

Postby tarundas » Tue Dec 01, 2009 2:36 am

I am getting the dial back ring then it says "not a valid extension"
Any idea ?


[testcarrier]
disallow=all
allow=g729
type=friend
host=xxx.xxx.xxx.xxx
dtmfmode=rfc2833
context=trunkinbound

Protocol: SIP
Globals String: TESTSIPTRUNK = SIP/testcarrier

Dialplan Entry:

exten => _9144XXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9144XXXXXXXXXX,2,Dial(${TESTSIPTRUNK}/${EXTEN:2},,tTor)
exten => _9144XXXXXXXXXX,3,Hangup

exten => _9144XXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9144XXXXXXXXX,2,Dial(${TESTSIPTRUNK}/${EXTEN:2},,tTor)
exten => _9144XXXXXXXXX,3,Hangup


exten => _9161XXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9161XXXXXXXXX,2,Dial(${TESTSIPTRUNK}/${EXTEN:2},,tTor)
exten => _9161XXXXXXXXX,3,Hangup

exten => _911XXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _911XXXXXXXXXX,2,Dial(${TESTSIPTRUNK}/${EXTEN:2},,tTor)
exten => _911XXXXXXXXXX,3,Hangup
tarundas
 
Posts: 62
Joined: Wed Nov 25, 2009 3:02 pm
Location: Calcutta

Postby tarundas » Tue Dec 01, 2009 4:11 am

Got it. my Vividial_conference IP was wrong.
It's working now!
tarundas
 
Posts: 62
Joined: Wed Nov 25, 2009 3:02 pm
Location: Calcutta

Re: I am sorry that is not a valid exten pls try again

Postby earlfox » Sun Dec 09, 2012 8:50 am

what you did to make it work?
earlfox
 
Posts: 14
Joined: Sat Sep 22, 2012 2:38 am

Re: I am sorry that is not a valid exten pls try again

Postby bbakirtas » Mon Dec 10, 2012 6:15 am

conferans ip 192.168.1.2 change your ip adress
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: Google [Bot] and 20 guests