Unable to write frame to channel: Success

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Unable to write frame to channel: Success

Postby mati » Tue Oct 10, 2006 1:25 pm

Hi,

In my asterisk log I constantly get "app_meetme.c: Unable to write frame to channel: Success". It is ~ 200 message per sec. I don't find that this warning causes any trouble, exept bigger log file.
mati
 
Posts: 47
Joined: Wed Aug 09, 2006 3:07 pm

Postby gschaller » Tue Oct 10, 2006 3:31 pm

Do you use DTF tones? Try "soft hangup Local/85" <TAB> (press the tab key) and look for the channels. I have a cronjob for this problem. It searches for the DTMF channels, wait some seconds and kill them with "soft hangup".
gschaller
 
Posts: 99
Joined: Thu Jun 29, 2006 1:59 pm

Postby mati » Tue Oct 10, 2006 3:35 pm

No I don't use DTMF.
mati
 
Posts: 47
Joined: Wed Aug 09, 2006 3:07 pm

Postby mflorell » Tue Oct 10, 2006 3:40 pm

What zaptel timer are you using?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby mati » Tue Oct 10, 2006 3:54 pm

I use digium clone with 4e1 ports. I synchronize with E1 from my telecom.
mati
 
Posts: 47
Joined: Wed Aug 09, 2006 3:07 pm

Postby mflorell » Tue Oct 10, 2006 7:52 pm

What kind of digium clone?

I have had bad luck with most of them, except for Sangoma which work great.
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby mati » Wed Oct 11, 2006 1:17 am

Tormenta 2. It works ok, sometimes agents reports echo.
mati
 
Posts: 47
Joined: Wed Aug 09, 2006 3:07 pm

Postby mflorell » Wed Oct 11, 2006 1:25 am

What version of Asterisk are you using?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Postby mati » Wed Oct 11, 2006 1:42 am

asterisk 1.2.11 and 1.2.12.1, both with the same problem
mati
 
Posts: 47
Joined: Wed Aug 09, 2006 3:07 pm

Postby mflorell » Wed Oct 11, 2006 6:40 am

There were a lot of changes after 1.2.10, try 1.2.10 and see if that helps. Also try an older version of zaptel.
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida


Return to Support

Who is online

Users browsing this forum: No registered users and 70 guests