vicidial.org

VICIDIAL astGUIclient discussion forum

Skip to content

Vicidial.org Home      Vicidial Forum      Vicidial Wiki      Vicidial Issue Tracker      astGUIclient Project Page


Autodial issues

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Post a reply

Autodial issues

Postby umop3plsdn » Fri Oct 06, 2006 12:43 pm

I can login initially with my SIP softphone and make as many manual calls as I want to. As soon as I login to VICIDIAL it just waits and waits and waits for a call. I see it dialing in the Asterisk log just fine... However, no calls are connected. Then if I logout and try to do a manual dial all I receive is a solid tone. I've tried to reload asterisk completely by every known method including a kill -9(and then running start_asterisk_boot.pl), stop gracefully, HUPing it, restart now.... and I still wont be able to make a manual outbound call.. seems as if one of my T1 channels stays in a locked status. Now if I reboot the dialer, manual dialing works fine again until I login to VICIDIAL. Any insight would be greatly appreciated.
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Fri Oct 06, 2006 2:05 pm

What is the output of "screen -r"

Can you post some Asterisk CLI output from when you try to auto-dial?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Fri Oct 06, 2006 3:29 pm

There are several suitable screens on:
2784.ASTlisten (Detached)
2790.ASTsend (Detached)
2795.ASTVDadapt (Detached)
2799.ASTVDauto (Detached)
2808.ASTVDremote (Detached)
2809.ASTupdate (Detached)
------------------------------------------------------------------------------------------
*CLI> == Refreshing DNS lookups.
-- Executing Dial("SIP/xlite1-081af300", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
-- Hungup 'Zap/1-1'
== Spawn extension (default, 912072998485, 1) exited non-zero on 'SIP/xlite1-081af300'
-- Executing DeadAGI("SIP/xlite1-081af300", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("SIP/xlite1-081af300", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCE
L----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
-- AGI Script VD_hangup.agi completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
--------------------------------------------------------------------------------

Executing Dial("SIP/xlite1-081af300", "Zap/g1/12072998485||tTo") is my manual dial as you can probably already tell.
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Fri Oct 06, 2006 4:24 pm

Can you attach to the ASTVDauto screen and post the output when you have a person logged in to auto-dial?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Fri Oct 06, 2006 5:00 pm

loop counter: |5758422|
TIME DEBUG: -4.00|-3|1| GMT: 20:57
2006-10-06 17:57:30|LIVE AGENTS LOGGED IN: 1|
2006-10-06 17:57:30|1212 192.168.1.150: agents: 1 dial_level: 3.0|
2006-10-06 17:57:30|1212 192.168.1.150: Calls to place: 0 (3 - 3) |
2006-10-06 17:57:30|CAMPAIGN DIFFERENTIAL: 0.3 0.3 (0.3 - 0)|
2006-10-06 17:57:30|1212 192.168.1.150: CALLING|
TIME DEBUG: -4.00|-3|1| GMT: 20:57
2006-10-06 17:57:30|| lagged call vla agent PAUSED 0E0|20061006175700|20061006175720|20061006175730||
2006-10-06 17:57:30|| lagged call vac agent DELETED 0E0|2006-10-06 17:55:30||
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby umop3plsdn » Fri Oct 06, 2006 5:00 pm

repeat repeat repeat
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Fri Oct 06, 2006 5:47 pm

Do you have entries in your vicidial_auto_calls table when you have noone logged in?

if so delete them
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Mon Oct 09, 2006 8:23 am

I only have entries when someone is logged in.
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Mon Oct 09, 2006 12:17 pm

What kind of telco circuit do you have?

Please post the dialing that happens on the Asterisk CLI when you are in auto-dialing mode.

Please post some of the contents of the /var/log/astguiclient/action_full.2006-XX-XX file for the timeframe when you are attempting to auto-dial.
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Mon Oct 09, 2006 1:59 pm

We have a T1, d4 framing, ami coding, E&M Wink start
--------------------------------------------------------------------------------
> Channel SIP/xlite1-081ae298 was answered.
-- Executing MeetMe("SIP/xlite1-081ae298", "8600051") in new stack
== Parsing '/etc/asterisk/meetme.conf': Found
-- Created MeetMe conference 1023 for conference '8600051'
-- Playing 'conf-onlyperson' (language 'en')
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-eb34,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-eb34,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-8f04,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-8f04,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-42a6,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-42a6,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
-- Hungup 'Zap/1-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-eb34,2'
-- Executing DeadAGI("Local/912072998485@default-eb34,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-eb34,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
== Manager 'sendcron' logged off from 127.0.0.1
-- Hungup 'Zap/2-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-8f04,2'
-- Executing DeadAGI("Local/912072998485@default-8f04,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-8f04,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
-- AGI Script VD_hangup.agi completed, returning 0
== Manager 'sendcron' logged off from 127.0.0.1
-- Hungup 'Zap/3-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-42a6,2'
-- Executing DeadAGI("Local/912072998485@default-42a6,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script VD_hangup.agi completed, returning 0
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-42a6,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
-- AGI Script VD_hangup.agi completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-dae2,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-dae2,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-719f,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-719f,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-b009,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-b009,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Refreshing DNS lookups.
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
-- Hungup 'Zap/1-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-dae2,2'
-- Executing DeadAGI("Local/912072998485@default-dae2,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
== Manager 'sendcron' logged off from 127.0.0.1
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-dae2,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
-- AGI Script VD_hangup.agi completed, returning 0
-- Hungup 'Zap/2-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-719f,2'
-- Executing DeadAGI("Local/912072998485@default-719f,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
== Manager 'sendcron' logged off from 127.0.0.1
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-719f,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
-- AGI Script VD_hangup.agi completed, returning 0
-- Hungup 'Zap/3-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-b009,2'
-- Executing DeadAGI("Local/912072998485@default-b009,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
== Manager 'sendcron' logged off from 127.0.0.1
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-b009,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
-- AGI Script VD_hangup.agi completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-b1ea,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-b1ea,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-70b2,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-70b2,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-60dc,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-60dc,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
-- Hungup 'Zap/1-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-b1ea,2'
-- Executing DeadAGI("Local/912072998485@default-b1ea,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
== Manager 'sendcron' logged off from 127.0.0.1
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-b1ea,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
-- Hungup 'Zap/2-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-70b2,2'
-- Executing DeadAGI("Local/912072998485@default-70b2,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
== Manager 'sendcron' logged off from 127.0.0.1
-- AGI Script VD_hangup.agi completed, returning 0
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-70b2,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
== Manager 'sendcron' logged off from 127.0.0.1
-- Hungup 'Zap/3-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-60dc,2'
-- Executing DeadAGI("Local/912072998485@default-60dc,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script VD_hangup.agi completed, returning 0
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-60dc,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
-- AGI Script VD_hangup.agi completed, returning 0
---------------------------------------------------------------------------------

2006-10-09 9:22:18|0|1|
Action: Originate
Channel: SIP/xlite1
Context: default
Exten: 8600051
Priority: 1
Callerid: S0610090922178600051

|
2006-10-09 9:22:18|1||Response: Success
Message: Originate successfully queued

|
2006-10-09 9:22:18|2||Response: Goodbye
Message: Thanks for all the fish.

|
2006-10-09 9:22:28|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092228000000029" <0000000000>
Timeout: 60000

|
2006-10-09 9:22:28|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092228000000028" <0000000000>
Timeout: 60000

|
2006-10-09 9:22:28|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092228000000030" <0000000000>
Timeout: 60000

|
2006-10-09 9:22:28|1|||
2006-10-09 9:22:28|1|||
2006-10-09 9:22:28|1|||
2006-10-09 9:22:28|2|||
2006-10-09 9:22:28|2|||
2006-10-09 9:22:28|2|||
2006-10-09 9:23:34|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092334000000032" <0000000000>
Timeout: 60000

|
2006-10-09 9:23:34|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092334000000033" <0000000000>
Timeout: 60000

|
2006-10-09 9:23:34|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092334000000031" <0000000000>
Timeout: 60000

|
2006-10-09 9:23:34|1|||
2006-10-09 9:23:34|1|||
2006-10-09 9:23:34|1|||
2006-10-09 9:23:34|2|||
2006-10-09 9:23:34|2|||
2006-10-09 9:23:34|2|||
2006-10-09 9:24:40|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092440000000034" <0000000000>
Timeout: 60000

|
2006-10-09 9:24:40|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092440000000035" <0000000000>
Timeout: 60000

|
2006-10-09 9:24:40|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092440000000036" <0000000000>
Timeout: 60000

|
2006-10-09 9:23:34|1|||
2006-10-09 9:23:34|1|||
2006-10-09 9:23:34|1|||
2006-10-09 9:23:34|2|||
2006-10-09 9:23:34|2|||
2006-10-09 9:23:34|2|||
2006-10-09 9:24:40|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092440000000034" <0000000000>
Timeout: 60000

|
2006-10-09 9:24:40|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092440000000035" <0000000000>
Timeout: 60000

|
2006-10-09 9:24:40|0|1|
Action: Originate
Exten: 8365
Context: default
Channel: Local/912072998485@default
Priority: 1
Callerid: "V1009092440000000036" <0000000000>
Timeout: 60000

|
2006-10-09 9:24:40|1|||
2006-10-09 9:24:40|1|||
2006-10-09 9:24:40|1|||
2006-10-09 9:24:40|2|||
2006-10-09 9:24:40|2|||
2006-10-09 9:24:40|2|||
2006-10-09 11:50:16|0|1|
Action: Hangup
Channel: SIP/xlite1-081ae298

|
2006-10-09 11:50:16|1||Response: Success
Message: Channel Hungup

|
2006-10-09 11:50:16|2||Response: Goodbye
Message: Thanks for all the fish.
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby umop3plsdn » Mon Oct 09, 2006 2:03 pm

i appreciate the time you are taking to help me out... I realize you are a pretty busy guy.
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Mon Oct 09, 2006 2:38 pm

Could you post the Asterisk CLI output with AGI output set to STDERR?

I am noticing that there does not seem to be a Success for all of the Originate Actions sent, are these present in the file?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Mon Oct 09, 2006 4:00 pm

AGI Debugging Enabled
== Manager 'sendcron' logged off from 127.0.0.1
-- Hungup 'Zap/1-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-72e8,2'
-- Executing DeadAGI("Local/912072998485@default-72e8,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
AGI Tx >> agi_request: call_log.agi
AGI Tx >> agi_channel: Local/912072998485@default-72e8,2
AGI Tx >> agi_language: en
AGI Tx >> agi_type: Local
AGI Tx >> agi_uniqueid: 1160427464.3
AGI Tx >> agi_callerid: 0000000000
AGI Tx >> agi_calleridname: V1009165743000000038
AGI Tx >> agi_callingpres: 0
AGI Tx >> agi_callingani2: 0
AGI Tx >> agi_callington: 0
AGI Tx >> agi_callingtns: 0
AGI Tx >> agi_dnid: unknown
AGI Tx >> agi_rdnis: unknown
AGI Tx >> agi_context: default
AGI Tx >> agi_extension: h
AGI Tx >> agi_priority: 1
AGI Tx >> agi_enhanced: 0.0
AGI Tx >> agi_accountcode:
AGI Tx >>
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-72e8,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
AGI Tx >> agi_request: VD_hangup.agi
AGI Tx >> agi_channel: Local/912072998485@default-72e8,2
AGI Tx >> agi_language: en
AGI Tx >> agi_type: Local
AGI Tx >> agi_uniqueid: 1160427464.3
AGI Tx >> agi_callerid: 0000000000
AGI Tx >> agi_calleridname: V1009165743000000038
AGI Tx >> agi_callingpres: 0
AGI Tx >> agi_callingani2: 0
AGI Tx >> agi_callington: 0
AGI Tx >> agi_callingtns: 0
AGI Tx >> agi_dnid: unknown
AGI Tx >> agi_rdnis: unknown
AGI Tx >> agi_context: default
AGI Tx >> agi_extension: h
AGI Tx >> agi_priority: 2
AGI Tx >> agi_enhanced: 0.0
AGI Tx >> agi_accountcode:
AGI Tx >>
-- AGI Script VD_hangup.agi completed, returning 0
== Manager 'sendcron' logged off from 127.0.0.1
-- Hungup 'Zap/3-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-4a00,2'
-- Executing DeadAGI("Local/912072998485@default-4a00,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
AGI Tx >> agi_request: call_log.agi
AGI Tx >> agi_channel: Local/912072998485@default-4a00,2
AGI Tx >> agi_language: en
AGI Tx >> agi_type: Local
AGI Tx >> agi_uniqueid: 1160427464.9
AGI Tx >> agi_callerid: 0000000000
AGI Tx >> agi_calleridname: V1009165743000000037
AGI Tx >> agi_callingpres: 0
AGI Tx >> agi_callingani2: 0
AGI Tx >> agi_callington: 0
AGI Tx >> agi_callingtns: 0
AGI Tx >> agi_dnid: unknown
AGI Tx >> agi_rdnis: unknown
AGI Tx >> agi_context: default
AGI Tx >> agi_extension: h
AGI Tx >> agi_priority: 1
AGI Tx >> agi_enhanced: 0.0
AGI Tx >> agi_accountcode:
AGI Tx >>
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-4a00,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
AGI Tx >> agi_request: VD_hangup.agi
AGI Tx >> agi_channel: Local/912072998485@default-4a00,2
AGI Tx >> agi_language: en
AGI Tx >> agi_type: Local
AGI Tx >> agi_uniqueid: 1160427464.9
AGI Tx >> agi_callerid: 0000000000
AGI Tx >> agi_calleridname: V1009165743000000037
AGI Tx >> agi_callingpres: 0
AGI Tx >> agi_callingani2: 0
AGI Tx >> agi_callington: 0
AGI Tx >> agi_callingtns: 0
AGI Tx >> agi_dnid: unknown
AGI Tx >> agi_rdnis: unknown
AGI Tx >> agi_context: default
AGI Tx >> agi_extension: h
AGI Tx >> agi_priority: 2
AGI Tx >> agi_enhanced: 0.0
AGI Tx >> agi_accountcode:
AGI Tx >>
-- AGI Script VD_hangup.agi completed, returning 0
-- Hungup 'Zap/2-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-450a,2'
-- Executing DeadAGI("Local/912072998485@default-450a,2", "call_log.agi|h") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
AGI Tx >> agi_request: call_log.agi
AGI Tx >> agi_channel: Local/912072998485@default-450a,2
AGI Tx >> agi_language: en
AGI Tx >> agi_type: Local
== Manager 'sendcron' logged off from 127.0.0.1
AGI Tx >> agi_uniqueid: 1160427464.6
AGI Tx >> agi_callerid: 0000000000
AGI Tx >> agi_calleridname: V1009165743000000039
AGI Tx >> agi_callingpres: 0
AGI Tx >> agi_callingani2: 0
AGI Tx >> agi_callington: 0
AGI Tx >> agi_callingtns: 0
AGI Tx >> agi_dnid: unknown
AGI Tx >> agi_rdnis: unknown
AGI Tx >> agi_context: default
AGI Tx >> agi_extension: h
AGI Tx >> agi_priority: 1
AGI Tx >> agi_enhanced: 0.0
AGI Tx >> agi_accountcode:
AGI Tx >>
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-450a,2", "VD_hangup.agi|PRI-----NODEBUG-----0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
AGI Tx >> agi_request: VD_hangup.agi
AGI Tx >> agi_channel: Local/912072998485@default-450a,2
AGI Tx >> agi_language: en
AGI Tx >> agi_type: Local
AGI Tx >> agi_uniqueid: 1160427464.6
AGI Tx >> agi_callerid: 0000000000
AGI Tx >> agi_calleridname: V1009165743000000039
AGI Tx >> agi_callingpres: 0
AGI Tx >> agi_callingani2: 0
AGI Tx >> agi_callington: 0
AGI Tx >> agi_callingtns: 0
AGI Tx >> agi_dnid: unknown
AGI Tx >> agi_rdnis: unknown
AGI Tx >> agi_context: default
AGI Tx >> agi_extension: h
AGI Tx >> agi_priority: 2
AGI Tx >> agi_enhanced: 0.0
AGI Tx >> agi_accountcode:
AGI Tx >>
-- AGI Script VD_hangup.agi completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-47f7,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
AGI Tx >> agi_request: call_log.agi
AGI Tx >> agi_channel: Local/912072998485@default-47f7,2
AGI Tx >> agi_language: en
AGI Tx >> agi_type: Local
AGI Tx >> agi_uniqueid: 1160427529.15
AGI Tx >> agi_callerid: 0000000000
AGI Tx >> agi_calleridname: V1009165849000000040
AGI Tx >> agi_callingpres: 0
AGI Tx >> agi_callingani2: 0
AGI Tx >> agi_callington: 0
AGI Tx >> agi_callingtns: 0
AGI Tx >> agi_dnid: unknown
AGI Tx >> agi_rdnis: unknown
AGI Tx >> agi_context: default
AGI Tx >> agi_extension: 912072998485
AGI Tx >> agi_priority: 1
AGI Tx >> agi_enhanced: 0.0
AGI Tx >> agi_accountcode:
AGI Tx >>
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-47f7,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-cd24,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
AGI Tx >> agi_request: call_log.agi
AGI Tx >> agi_channel: Local/912072998485@default-cd24,2
AGI Tx >> agi_language: en
AGI Tx >> agi_type: Local
AGI Tx >> agi_uniqueid: 1160427530.18
AGI Tx >> agi_callerid: 0000000000
AGI Tx >> agi_calleridname: V1009165849000000041
AGI Tx >> agi_callingpres: 0
AGI Tx >> agi_callingani2: 0
AGI Tx >> agi_callington: 0
AGI Tx >> agi_callingtns: 0
AGI Tx >> agi_dnid: unknown
AGI Tx >> agi_rdnis: unknown
AGI Tx >> agi_context: default
AGI Tx >> agi_extension: 912072998485
AGI Tx >> agi_priority: 1
AGI Tx >> agi_enhanced: 0.0
AGI Tx >> agi_accountcode:
AGI Tx >>
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-cd24,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-683f,2", "call_log.agi|912072998485") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
AGI Tx >> agi_request: call_log.agi
AGI Tx >> agi_channel: Local/912072998485@default-683f,2
AGI Tx >> agi_language: en
AGI Tx >> agi_type: Local
AGI Tx >> agi_uniqueid: 1160427530.21
AGI Tx >> agi_callerid: 0000000000
AGI Tx >> agi_calleridname: V1009165849000000042
AGI Tx >> agi_callingpres: 0
AGI Tx >> agi_callingani2: 0
AGI Tx >> agi_callington: 0
AGI Tx >> agi_callingtns: 0
AGI Tx >> agi_dnid: unknown
AGI Tx >> agi_rdnis: unknown
AGI Tx >> agi_context: default
AGI Tx >> agi_extension: 912072998485
AGI Tx >> agi_priority: 1
AGI Tx >> agi_enhanced: 0.0
AGI Tx >> agi_accountcode:
AGI Tx >>
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-683f,2", "Zap/g1/12072998485||tTo") in new stack
-- Called g1/12072998485
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby umop3plsdn » Mon Oct 09, 2006 4:43 pm

> Channel SIP/xlite1-081af338 was answered.
-- Executing MeetMe("SIP/xlite1-081af338", "8600051") in new stack
== Parsing '/etc/asterisk/meetme.conf': Found
-- Created MeetMe conference 1023 for conference '8600051'
-- Playing 'conf-onlyperson' (language 'en')
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-88c3,2", "call_log.agi|912072998485
") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
2006-10-09 17:40:24|call_log.agi|Perl Environment Dump:
2006-10-09 17:40:24|call_log.agi|0|912072998485
2006-10-09 17:40:24|call_log.agi|AGI Environment Dump:
2006-10-09 17:40:24|call_log.agi| -- accountcode =
2006-10-09 17:40:24|call_log.agi| -- callerid = 0000000000
2006-10-09 17:40:24|call_log.agi| -- calleridname = V1009174024000000045
2006-10-09 17:40:24|call_log.agi| -- callingani2 = 0
2006-10-09 17:40:24|call_log.agi| -- callingpres = 0
2006-10-09 17:40:24|call_log.agi| -- callingtns = 0
2006-10-09 17:40:24|call_log.agi| -- callington = 0
2006-10-09 17:40:24|call_log.agi| -- channel = Local/912072998485@default-88c3,2
2006-10-09 17:40:24|call_log.agi| -- context = default
2006-10-09 17:40:24|call_log.agi| -- dnid = unknown
2006-10-09 17:40:24|call_log.agi| -- enhanced = 0.0
2006-10-09 17:40:24|call_log.agi| -- extension = 912072998485
2006-10-09 17:40:24|call_log.agi| -- language = en
2006-10-09 17:40:24|call_log.agi| -- priority = 1
2006-10-09 17:40:24|call_log.agi| -- rdnis = unknown
2006-10-09 17:40:24|call_log.agi| -- request = call_log.agi
2006-10-09 17:40:24|call_log.agi| -- type = Local
2006-10-09 17:40:24|call_log.agi| -- uniqueid = 1160430024.3
2006-10-09 17:40:24|call_log.agi|AGI Variables: |1160430024.3|Local/912072998485@default-88c3,2|912072998485|Local|V1009174024000000045|
2006-10-09 17:40:24|call_log.agi|+++++ CALL LOG START : 2006-10-09 17:40:24
2006-10-09 17:40:24|call_log.agi||INSERT INTO call_log (uniqueid,channel,channel_group,type,server_ip,extension,number_dialed,start_time,start_epoch,end_time
,end_epoch,length_in_sec,length_in_min,caller_code) values('1160430024.3','Local/912072998485@default-88c3,2','','Local','192.168.1.150','912072998485','','2
006-10-09 17:40:24','1160430024','','','','','V1009174024000000045')|
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-e34a,2", "call_log.agi|912072998485
") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-88c3,2", "Zap/g1/12072998485||tTo")
in new stack
-- Called g1/12072998485
2006-10-09 17:40:24|call_log.agi|Perl Environment Dump:
2006-10-09 17:40:24|call_log.agi|0|912072998485
2006-10-09 17:40:24|call_log.agi|AGI Environment Dump:
2006-10-09 17:40:24|call_log.agi| -- accountcode =
2006-10-09 17:40:24|call_log.agi| -- callerid = 0000000000
2006-10-09 17:40:24|call_log.agi| -- calleridname = V1009174024000000044
2006-10-09 17:40:24|call_log.agi| -- callingani2 = 0
2006-10-09 17:40:24|call_log.agi| -- callingpres = 0
2006-10-09 17:40:24|call_log.agi| -- callingtns = 0
2006-10-09 17:40:24|call_log.agi| -- callington = 0
2006-10-09 17:40:24|call_log.agi| -- channel = Local/912072998485@default-e34a,2
2006-10-09 17:40:24|call_log.agi| -- context = default
2006-10-09 17:40:24|call_log.agi| -- dnid = unknown
2006-10-09 17:40:24|call_log.agi| -- enhanced = 0.0
2006-10-09 17:40:24|call_log.agi| -- extension = 912072998485
2006-10-09 17:40:24|call_log.agi| -- language = en
2006-10-09 17:40:24|call_log.agi| -- priority = 1
2006-10-09 17:40:24|call_log.agi| -- rdnis = unknown
2006-10-09 17:40:24|call_log.agi| -- request = call_log.agi
2006-10-09 17:40:24|call_log.agi| -- type = Local
2006-10-09 17:40:24|call_log.agi| -- uniqueid = 1160430024.5
2006-10-09 17:40:24|call_log.agi|AGI Variables: |1160430024.5|Local/912072998485@default-e34a,2|912072998485|Local|V1009174024000000044|
2006-10-09 17:40:24|call_log.agi|+++++ CALL LOG START : 2006-10-09 17:40:24
2006-10-09 17:40:24|call_log.agi||INSERT INTO call_log (uniqueid,channel,channel_group,type,server_ip,extension,number_dialed,start_time,start_epoch,end_time
,end_epoch,length_in_sec,length_in_min,caller_code) values('1160430024.5','Local/912072998485@default-e34a,2','','Local','192.168.1.150','912072998485','','2
006-10-09 17:40:24','1160430024','','','','','V1009174024000000044')|
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-e34a,2", "Zap/g1/12072998485||tTo")
in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing DeadAGI("Local/912072998485@default-f5ff,2", "call_log.agi|912072998485
") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
2006-10-09 17:40:24|call_log.agi|Perl Environment Dump:
2006-10-09 17:40:24|call_log.agi|0|912072998485
2006-10-09 17:40:24|call_log.agi|AGI Environment Dump:
2006-10-09 17:40:24|call_log.agi| -- accountcode =
2006-10-09 17:40:24|call_log.agi| -- callerid = 0000000000
2006-10-09 17:40:24|call_log.agi| -- calleridname = V1009174024000000043
2006-10-09 17:40:24|call_log.agi| -- callingani2 = 0
2006-10-09 17:40:24|call_log.agi| -- callingpres = 0
2006-10-09 17:40:24|call_log.agi| -- callingtns = 0
2006-10-09 17:40:24|call_log.agi| -- callington = 0
2006-10-09 17:40:24|call_log.agi| -- channel = Local/912072998485@default-f5ff,2
2006-10-09 17:40:24|call_log.agi| -- context = default
2006-10-09 17:40:24|call_log.agi| -- dnid = unknown
2006-10-09 17:40:24|call_log.agi| -- enhanced = 0.0
2006-10-09 17:40:24|call_log.agi| -- extension = 912072998485
2006-10-09 17:40:24|call_log.agi| -- language = en
2006-10-09 17:40:24|call_log.agi| -- priority = 1
2006-10-09 17:40:24|call_log.agi| -- rdnis = unknown
2006-10-09 17:40:24|call_log.agi| -- request = call_log.agi
2006-10-09 17:40:24|call_log.agi| -- type = Local
2006-10-09 17:40:24|call_log.agi| -- uniqueid = 1160430024.9
2006-10-09 17:40:24|call_log.agi|AGI Variables: |1160430024.9|Local/912072998485@default-f5ff,2|912072998485|Local|V1009174024000000043|
2006-10-09 17:40:24|call_log.agi|+++++ CALL LOG START : 2006-10-09 17:40:24
2006-10-09 17:40:24|call_log.agi||INSERT INTO call_log (uniqueid,channel,channel_group,type,server_ip,extension,number_dialed,start_time,start_epoch,end_time
,end_epoch,length_in_sec,length_in_min,caller_code) values('1160430024.9','Local/912072998485@default-f5ff,2','','Local','192.168.1.150','912072998485','','2
006-10-09 17:40:24','1160430024','','','','','V1009174024000000043')|
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/912072998485@default-f5ff,2", "Zap/g1/12072998485||tTo")
in new stack
-- Called g1/12072998485
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
-- Hungup 'Zap/2-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-e34a,2'
-- Executing DeadAGI("Local/912072998485@default-e34a,2", "call_log.agi|h") in ne
w stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- Hungup 'Zap/1-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-88c3,2'
-- Executing DeadAGI("Local/912072998485@default-88c3,2", "call_log.agi|h") in ne
w stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
2006-10-09 17:41:27|call_log.agi|AGI Environment Dump:
2006-10-09 17:41:27|call_log.agi| -- accountcode =
2006-10-09 17:41:27|call_log.agi| -- callerid = 0000000000
2006-10-09 17:41:27|call_log.agi| -- calleridname = V1009174024000000044
2006-10-09 17:41:27|call_log.agi| -- callingani2 = 0
2006-10-09 17:41:27|call_log.agi| -- callingpres = 0
2006-10-09 17:41:27|call_log.agi| -- callingtns = 0
2006-10-09 17:41:27|call_log.agi| -- callington = 0
2006-10-09 17:41:27|call_log.agi| -- channel = Local/912072998485@default-e34a,2
2006-10-09 17:41:27|call_log.agi| -- context = default
2006-10-09 17:41:27|call_log.agi| -- dnid = unknown
2006-10-09 17:41:27|call_log.agi| -- enhanced = 0.0
2006-10-09 17:41:27|call_log.agi| -- extension = h
2006-10-09 17:41:27|call_log.agi| -- language = en
2006-10-09 17:41:27|call_log.agi| -- priority = 1
2006-10-09 17:41:27|call_log.agi| -- rdnis = unknown
2006-10-09 17:41:27|call_log.agi| -- request = call_log.agi
2006-10-09 17:41:27|call_log.agi| -- type = Local
2006-10-09 17:41:27|call_log.agi| -- uniqueid = 1160430024.5
2006-10-09 17:41:27|call_log.agi|AGI Variables: |1160430024.5|Local/912072998485@default-e34a,2|h|Local|V1009174024000000044|
2006-10-09 17:41:27|call_log.agi||CALL HUNG UP|
2006-10-09 17:41:27|call_log.agi||1160430024.5000000|1160430024|
2006-10-09 17:41:27|call_log.agi|QUERY done: start time = 1160430024 | sec: 63 | min: 1.05 |
2006-10-09 17:41:27|call_log.agi||UPDATE call_log set end_time='2006-10-09 17:41:27',end_epoch='1160430087',length_in_sec=63,length_in_min=' 1.05' where u
niqueid='1160430024.5'|
2006-10-09 17:41:27|call_log.agi||DELETE from live_inbound where uniqueid='1160430024.5' and server_ip='192.168.1.150'|
2006-10-09 17:41:27|call_log.agi|+++++ CALL LOG HUNGUP: |1160430024.5|Local/912072998485@default-e34a,2|h|2006-10-09 17:41:27|min: 1.05|
2006-10-09 17:41:27|call_log.agi|AGI Environment Dump:
2006-10-09 17:41:27|call_log.agi| -- accountcode =
2006-10-09 17:41:27|call_log.agi| -- callerid = 0000000000
2006-10-09 17:41:27|call_log.agi| -- calleridname = V1009174024000000045
2006-10-09 17:41:27|call_log.agi| -- callingani2 = 0
2006-10-09 17:41:27|call_log.agi| -- callingpres = 0
2006-10-09 17:41:27|call_log.agi| -- callingtns = 0
2006-10-09 17:41:27|call_log.agi| -- callington = 0
2006-10-09 17:41:27|call_log.agi| -- channel = Local/912072998485@default-88c3,2
2006-10-09 17:41:27|call_log.agi| -- context = default
2006-10-09 17:41:27|call_log.agi| -- dnid = unknown
2006-10-09 17:41:27|call_log.agi| -- enhanced = 0.0
2006-10-09 17:41:27|call_log.agi| -- extension = h
2006-10-09 17:41:27|call_log.agi| -- language = en
2006-10-09 17:41:27|call_log.agi| -- priority = 1
2006-10-09 17:41:27|call_log.agi| -- rdnis = unknown
2006-10-09 17:41:27|call_log.agi| -- request = call_log.agi
2006-10-09 17:41:27|call_log.agi| -- type = Local
2006-10-09 17:41:27|call_log.agi| -- uniqueid = 1160430024.3
2006-10-09 17:41:27|call_log.agi|AGI Variables: |1160430024.3|Local/912072998485@default-88c3,2|h|Local|V1009174024000000045|
2006-10-09 17:41:27|call_log.agi||CALL HUNG UP|
2006-10-09 17:41:27|call_log.agi||1160430024.3000000|1160430024|
2006-10-09 17:41:27|call_log.agi|QUERY done: start time = 1160430024 | sec: 63 | min: 1.05 |
2006-10-09 17:41:27|call_log.agi||UPDATE call_log set end_time='2006-10-09 17:41:27',end_epoch='1160430087',length_in_sec=63,length_in_min=' 1.05' where u
niqueid='1160430024.3'|
2006-10-09 17:41:27|call_log.agi||DELETE from live_inbound where uniqueid='1160430024.3' and server_ip='192.168.1.150'|
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-e34a,2", "VD_hangup.agi|PRI-----NODEBUG--
---0-----CANCEL----------") in new stack
2006-10-09 17:41:27|call_log.agi|+++++ CALL LOG HUNGUP: |1160430024.3|Local/912072998485@default-88c3,2|h|2006-10-09 17:41:27|min: 1.05|
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-88c3,2", "VD_hangup.agi|PRI-----NODEBUG--
---0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
-- Hungup 'Zap/3-1'
== Spawn extension (default, 912072998485, 2) exited non-zero on 'Local/912072998485@default-f5ff,2'
-- Executing DeadAGI("Local/912072998485@default-f5ff,2", "call_log.agi|h") in ne
w stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
== Manager 'sendcron' logged off from 127.0.0.1
2006-10-09 17:41:27|call_log.agi|AGI Environment Dump:
2006-10-09 17:41:27|call_log.agi| -- accountcode =
2006-10-09 17:41:27|call_log.agi| -- callerid = 0000000000
2006-10-09 17:41:27|call_log.agi| -- calleridname = V1009174024000000043
2006-10-09 17:41:27|call_log.agi| -- callingani2 = 0
2006-10-09 17:41:27|call_log.agi| -- callingpres = 0
2006-10-09 17:41:27|call_log.agi| -- callingtns = 0
2006-10-09 17:41:27|call_log.agi| -- callington = 0
2006-10-09 17:41:27|call_log.agi| -- channel = Local/912072998485@default-f5ff,2
2006-10-09 17:41:27|call_log.agi| -- context = default
2006-10-09 17:41:27|call_log.agi| -- dnid = unknown
2006-10-09 17:41:27|call_log.agi| -- enhanced = 0.0
2006-10-09 17:41:27|call_log.agi| -- extension = h
2006-10-09 17:41:27|call_log.agi| -- language = en
2006-10-09 17:41:27|call_log.agi| -- priority = 1
2006-10-09 17:41:27|call_log.agi| -- rdnis = unknown
2006-10-09 17:41:27|call_log.agi| -- request = call_log.agi
2006-10-09 17:41:27|call_log.agi| -- type = Local
2006-10-09 17:41:27|call_log.agi| -- uniqueid = 1160430024.9
2006-10-09 17:41:27|call_log.agi|AGI Variables: |1160430024.9|Local/912072998485@default-f5ff,2|h|Local|V1009174024000000043|
2006-10-09 17:41:27|call_log.agi||CALL HUNG UP|
2006-10-09 17:41:27|call_log.agi||1160430024.9000001|1160430024|
2006-10-09 17:41:27|call_log.agi|QUERY done: start time = 1160430024 | sec: 63 | min: 1.05 |
2006-10-09 17:41:27|call_log.agi||UPDATE call_log set end_time='2006-10-09 17:41:27',end_epoch='1160430087',length_in_sec=63,length_in_min=' 1.05' where u
niqueid='1160430024.9'|
2006-10-09 17:41:27|call_log.agi||DELETE from live_inbound where uniqueid='1160430024.9' and server_ip='192.168.1.150'|
2006-10-09 17:41:27|call_log.agi|+++++ CALL LOG HUNGUP: |1160430024.9|Local/912072998485@default-f5ff,2|h|2006-10-09 17:41:27|min: 1.05|
-- AGI Script call_log.agi completed, returning 0
-- Executing DeadAGI("Local/912072998485@default-f5ff,2", "VD_hangup.agi|PRI-----NODEBUG--
---0-----CANCEL----------") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/VD_hangup.agi
2006-10-09 17:41:27|VD_hangup.agi|Perl Environment Dump:
2006-10-09 17:41:27|VD_hangup.agi|0|PRI-----NODEBUG-----0-----CANCEL----------
2006-10-09 17:41:27|VD_hangup.agi|AGI Environment Dump:
2006-10-09 17:41:27|VD_hangup.agi| -- accountcode =
2006-10-09 17:41:27|VD_hangup.agi| -- callerid = 0000000000
2006-10-09 17:41:27|VD_hangup.agi| -- calleridname = V1009174024000000044
2006-10-09 17:41:27|VD_hangup.agi| -- callingani2 = 0
2006-10-09 17:41:27|VD_hangup.agi| -- callingpres = 0
2006-10-09 17:41:27|VD_hangup.agi| -- callingtns = 0
2006-10-09 17:41:27|VD_hangup.agi| -- callington = 0
2006-10-09 17:41:27|VD_hangup.agi| -- channel = Local/912072998485@default-e34a,2
2006-10-09 17:41:27|VD_hangup.agi| -- context = default
2006-10-09 17:41:27|VD_hangup.agi| -- dnid = unknown
2006-10-09 17:41:27|VD_hangup.agi| -- enhanced = 0.0
2006-10-09 17:41:27|VD_hangup.agi| -- extension = h
2006-10-09 17:41:27|VD_hangup.agi| -- language = en
2006-10-09 17:41:27|VD_hangup.agi| -- priority = 2
2006-10-09 17:41:27|VD_hangup.agi| -- rdnis = unknown
2006-10-09 17:41:27|VD_hangup.agi| -- request = VD_hangup.agi
2006-10-09 17:41:27|VD_hangup.agi| -- type = Local
2006-10-09 17:41:27|VD_hangup.agi| -- uniqueid = 1160430024.5
2006-10-09 17:41:27|VD_hangup.agi|AGI Variables: |1160430024.5|Local/912072998485@default-e34a,2|h|Local|V1009174024000000044|
2006-10-09 17:41:27|VD_hangup.agi|DEBUG: NODEBUG
2006-10-09 17:41:27|VD_hangup.agi|VD_hangup : V1009174024000000044 Local/912072998485@default-e34a,2 2 44
2006-10-09 17:41:27|VD_hangup.agi|-- VDhangup Local DEBUG: |PRI|V1009174024000000044|CANCEL|0|
2006-10-09 17:41:27|VD_hangup.agi|+++++ VDAD START LOCAL CHANNEL: EXITING- 2
-- AGI Script VD_hangup.agi completed, returning 0
2006-10-09 17:41:27|VD_hangup.agi|Perl Environment Dump:
2006-10-09 17:41:27|VD_hangup.agi|0|PRI-----NODEBUG-----0-----CANCEL----------
2006-10-09 17:41:27|VD_hangup.agi|AGI Environment Dump:
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Mon Oct 09, 2006 5:11 pm

I'm not seeing any indication that the calls are being sent to a transfer AGI script. What do you have in the VDAD exten field of the Campaign?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Tue Oct 10, 2006 7:17 am

I have 8365 under the campaign VDAD extension
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Tue Oct 10, 2006 9:00 am

Do you see any Asterisk CLI output where agi-VDADtransfer.agi is being called?

What do you have for 8365 in your extensions.conf?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Tue Oct 10, 2006 9:23 am

I do not see that script being called upon whatsoever...

This is what I have for 8365 under extensions.conf

root@gravity:/# cat /etc/asterisk/extensions.conf |grep 8365
exten => 8365,1,AGI(call_log.agi,${EXTEN})
exten => 8365,2,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,3,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,4,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,5,Hangup
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Tue Oct 10, 2006 3:36 pm

Something is very wrong then. What a call is answered it should be sent to 8365 immediately. If Asterisk does not receive an Answer signal from the carrier it will not send it to 8365.

Are you getting an Answer signal?

how are your zaptel and zapata conf files configured?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Wed Oct 11, 2006 11:05 am

That's the thing... I have it loaded up with test leads all with phone numbers that I can answer and none of them ring... But doing a manual dial from my softphone before I attempt to try autodial will work.


root@gravity:/etc# cat zaptel.conf
span=1,0,0,d4,ami
e&m=1-24
loadzone=us
defaultzone=us


root@gravity:/etc# cat /etc/asterisk/zapata.conf
[channels]
group=1
language=en
signalling=em_w
usecallerid=yes
callerid=asreceived
context=default
echocancel=64
echocancelwhenbridged=yes
rxgain=1.0
txgain=1.0
channel => 1-24
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Wed Oct 11, 2006 11:42 am

Since you are using RBS T1s you can use ZapBarge to listen to a Zap channel as it is being dialed and actually hear the dialing process including DTMF tones. Can you listen in on one of you lines and hear what is happening to these calls?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Fri Oct 13, 2006 8:24 am

I barged a couple of the channels to find out that the DTMF tones are being passed before there is even dialtone. It goes straight to a fast busy and then a solid tone. Then those channels stay locked.
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Fri Oct 13, 2006 11:40 am

That doesn't sound very good. Do you have 10-digit or 11-digit dialing through your carrier?

Have you had your carrier monitor the circuit as you try to place calls?

What kind of Zaptel card are you using?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Fri Oct 13, 2006 11:48 am

We pass 11 digits through our carrier.

I know I must have something misconfigured maybe in my extensions.conf because I can do a manual dial from my softphone just fine. Plus I switch out to our old Sundial Technologies dialer when the reps come in and they work on the same circuit fine.

I have spoken with our carrier to monitor the circuit but they have their priorities and will not escalate the ticket. So i'm on the list to wait to see the translation on the channels.. It is kind of odd how it won't release the channel either. Fortunately we don't have to bounce the circuit when they are locked though.

We are using a Rhino R1T1
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby enjay » Fri Oct 13, 2006 12:24 pm

When you dial from the softphone do you also dial the 9? Perhaps you dont need the 9 to dial out? in which case you change the 9 in your campaign settings to X.

-enjay
enjay
 
Posts: 806
Joined: Mon Jun 19, 2006 12:40 pm
Location: Utah
Top

Postby umop3plsdn » Fri Oct 13, 2006 3:08 pm

Yea I definately dial a 9 via the softphone to get out.
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby gardo » Fri Oct 13, 2006 3:30 pm

have you checked your iptables? i used to have issues with autodialing not getting any calls. it seems that my firewall was turned on on my asterisk servers. turning them off solved the problem.
gardo
 
Posts: 1926
Joined: Fri Sep 15, 2006 10:24 am
Location: Manila, 1004
Top

Postby umop3plsdn » Mon Oct 16, 2006 7:52 am

Not filtering anything

root@gravity:~# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby umop3plsdn » Wed Oct 18, 2006 1:44 pm

So I started from scratch and got it all up everything worked just fine took 5 autodial calls. So I called it quits for about 30 minutes. Went to test it again and now it is doing the exact same thing as it was doing before.. I made no changes in that 30 minute window. I've tried rebooting everything there are no alarms..

Everytime I've checked this in the past I see 1 pseudo channel.. What is this all about?

gravity*CLI> zap show channels
Chan Extension Context Language MusicOnHold
pseudo default en
pseudo default en
1 default en
2 default en
3 default en
4 default en
5 default en
6 default en
7 default en
8 default en
9 default en
10 default en
11 default en
12 default en
13 default en
14 default en
15 default en
16 default en
17 default en
18 default en
19 default en
20 default en
21 default en
22 default en
23 default en
24 default en
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby mflorell » Wed Oct 18, 2006 7:28 pm

What version of astGUIclient are you using?

Can you post some of the output of your /var/log/astguiclient/agiout.2006-10-XX file when this happens?
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida
Top

Postby umop3plsdn » Tue Oct 31, 2006 8:45 am

Ok i've got it working but it is in the most unsual way. 100% reproducable atleast the last 75 times i've tried it. Mind you this defies all logic and doesn't make any sense but works. It seems as if the initiation for authentication screws it up somehow, if I login I can see it attempting to dial with no success whatsoever. But! if I leave the agent logged in client side and reboot the asterisk server as soon as the server starts back up it starts dialing and connecting the agent with calls!!!! So I attempt to logout and log back in and then there's nothing again! So it only works if I login all stations and then reboot the dialer. Any suggestions??
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top

Postby umop3plsdn » Wed Nov 01, 2006 8:59 am

What would cause something like this to happen?
umop3plsdn
 
Posts: 72
Joined: Wed Jul 26, 2006 9:47 am
Location: Maine
Top
Post a reply

Return to Support

Who is online

Users browsing this forum: No registered users and 95 guests

Powered by phpBB® Forum Software © phpBB Group