by dimorry » Fri Apr 09, 2010 9:15 am
Hi Fellows,
I have a 100% dial out operation, using manual dial (for now) running on a dell poweredge Dual 3.0 GHZ processor, 4 GB RAM and 10k SCSI hd.
I have a dedicated 2mb link and when i get over 8-10 simultaneous calls the agents start complainig about breakage and low volume calls. I'm not using any kind of compression.
I tested bypassing the vicidial server, connecting directly to my SIP provider(passing through my nat) and started to get perfect call quality. I also checked my nat networkcard at that time and it didn't even passed 1.3 mb of data being transfered which pretty much made me discard carrier and sip provider problems.
I have on this same box a digium board connected to a E1 and when I dial through the E1 i can have over 20 simultaneous calls without a problem.
I only make calls through E1 when I'm not making calls through SIP. I guess that with the digium board installed, i could discard timing issues also.
Is there a particular config for using with sip i'm missing here?
Thanks in advance,
Mauricio