SIP Trunk Issue

[pranay]

I have used asterisk 1.2 but I have never used asterisk 1.2.x so I am not familiar with how to configure my SIP trunk settings


Carrier Name: CORDIALT SIP CARRIER

Registration String: register=>********:pass@host ip


type=friend
dtmfmode=auto
host=host
context=outbound
username=*****
fromuser=*****
trustrpid=yes
sendrpid=yes
secret=******
allow=all
nat=yes


These are the trunk settings that were set up in Admin>>carriers

i used xlite

while making call i get the error called faild 404 not found


cc120/cc120 (Unspecified) D N 0 Unmonitored
cc119/cc119 (Unspecified) D N 0 Unmonitored
cc118/cc118 (Unspecified) D N 0 Unmonitored
cc117/cc117 (Unspecified) D N 0 Unmonitored
cc116/cc116 (Unspecified) D N 0 Unmonitored
cc115/cc115 (Unspecified) D N 0 Unmonitored
cc114/cc114 (Unspecified) D N 0 Unmonitored
cc113/cc113 (Unspecified) D N 0 Unmonitored
cc112/cc112 (Unspecified) D N 0 Unmonitored
cc111/cc111 (Unspecified) D N 0 Unmonitored
cc110/cc110 (Unspecified) D N 0 Unmonitored
cc109/cc109 (Unspecified) D N 0 Unmonitored
cc108/cc108 (Unspecified) D N 0 Unmonitored
cc107/cc107 (Unspecified) D N 0 Unmonitored
cc106/cc106 (Unspecified) D N 0 Unmonitored
cc105/cc105 192.168.1.18 D N 8448 Unmonitored
cc104/cc104 67.215.65.132 N 5060 Unmonitored
cc103/cc103 (Unspecified) D N 0 Unmonitored
cc102/cc102 (Unspecified) D N 0 Unmonitored
cc101/cc101 (Unspecified) D N 0 Unmonitored
cc100/cc100 (Unspecified) D N 0 Unmonitored
cordialt-outbound/1777988 192.168.1.5 N 5060 Unmonitored
53 sip peers [53 online , 0 offline]





Always
cc109 test default No Always
cc108 test default No Always
cc107 test default No Always
cc106 test default No Always
cc105 test default No Always
cc104 test defult No Always
cc103 test default No Always
cc102 test default No Always
cc101 test default No Always
cc100 test default No Always
cordialt-outbound ***** outbound No Always


it was like in vici*CLI> Asterisk

What should i do.

[williamconley]

First:

when you post, please post your entire configuration including (but not limited to) your installation method, vicidial version and build, asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box.

this IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

Second:

Do not double post (http://www.vicidial.org/VICIDIALforum/v ... highlight=)