listen problem in vicidial 2.2

[brett05]

i can not make a listen in vicidial 2.2

== Spawn extension (default, 8600052, 1) exited non-zero on 'SIP/cc100-007eab90'
[Nov 14 00:55:10] -- Executing DeadAGI("SIP/cc100-007eab90", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[Nov 14 00:55:10] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Nov 14 00:55:14] WARNING[4893]: channel.c:780 channel_find_locked: Avoided initial deadlock for '0x82f6b0', 9 retries!
[Nov 14 00:55:14] -- Executing Dial("SIP/cc100-007eab90", "IAX2/ASTblind:test@127.0.0.1:41569/68600052|55|To") in new stack
[Nov 14 00:55:14] -- Called ASTblind:test@127.0.0.1:41569/68600052
[Nov 14 00:55:46] WARNING[4902]: chan_iax2.c:1895 attempt_transmit: Max retries exceeded to host 127.0.0.1 on IAX2/127.0.0.1:41569-4192 (type = 6, subclass = 1, ts=10, seqno=0)

barge some time work and some time not work
my configuration is :
asterisk 1.2
ubuntu 64bit

[williamconley]

how did you install?

post your entire configuration (are you on slackware or ubuntu?)

please post your entire vicidial version (and build, it's at the bottom of most of your php screens in vicidial)

i ask because if you are on ubuntu 64 bit ... you must have manually installed. so there could well be an issue with your installation. so post the links to (or tell us where) the instructions that you used for your installation / upgrade.

did you see any "warnings" or "failures" in your upgrade? (good idea to completely putty log during upgrades so you can go back later and search for "warn", "fail", and anything else with obvious negative connotations.)

also, please let us know how you try to "make a listen", what button do you push on which screen or phone or etc.

[mflorell]

If you are using 2.2.0 you should be dialing 0 + session ID or just blind monitor using the real-time screen to click to listen to an agent.

[brett05]

thanks for answer i have install ubnutu 64bit in code2duo +4go of ram +500go of hdd in a single box and i have install also a multiserver in vicidial 2.2 the last one found in svn and for the installation guide it is founded in svn folder in trunk/doc/Ubuntu_Install.txt i have setup all step good the cpan the asterisk 1.2 also i have try many time asterisk 1.4 it 's work but asterisk 1.2 is more stable and to do listen i use the vicidial admin--->reports--->sip listen or sip barge i open my company and when i see some agent in call i clik in listen then automaticly the eyebeam will be opened then i will see this warning in asterisk CLI and when i clik in barge it 's work and i use sip with G729 .
my provider of voip use sip+g729 then i receive this in my box and then asterisk also have a full g729 as codec and finally i send all data to my agent with ulaw .

[mflorell]

admin.php version and build?

[brett05]

VERSION: 2.2.0-222
BUILD: 91031-1232

[mflorell]

Any reason you aren't using the new MONITOR ability in the Real-time screen?

[brett05]

what you mean by the new Real-time screen ?

[mflorell]

AST_timeonVDADall.php

[powehouse]

mflorell,

Just installed vicibox redux 2.0, I was wondering how to show the LISTEN and BARGE option in the real-time screen?

Vicibox VERSION: 2.4-256
BUILD: 100523-0840

[brett05]

this is not the probleme you can just uncomment the file admin.php and find the line of " Real-Time SIP:" and remove the "<!--" and "-->".
but my probleme when i do a listen to iax or sip i head same girl from vicidial help i think not the agent i have

[powehouse]

Got it to work, after commenting out the <!-- and --> from admin.php

Check your extensions.conf if the blind monitoring is configured right.

make sure your eyebeam softphone dialplan has prefix=2 or nothing at all.

Hope this helps!

Cheers!

[brett05]

you mean this line in extensions.conf
"; Local blind monitoring
exten => _08600XXX,1,Dial(${TRUNKblind}/6${EXTEN:1},55,To)"
what this will add to the listen probleme ???

[powehouse]

you mean this line in extensions.conf
"; Local blind monitoring
exten => _08600XXX,1,Dial(${TRUNKblind}/6${EXTEN:1},55,To)"
what this will add to the listen probleme ???

Yup! If you configured your vicidial conferences 8600XXX yeah!

Code: Select all

exten => _08600XXX,1,Dial(${TRUNKblind}/6${EXTEN:1},55,To)"

This line is for monitoring phones on the same server.

Cheers!

[brett05]

it's done before with the same exten in my extensions.conf

[mhido]

i have the same problem with listen sip dosn't work :
log asterisk:

-- Executing [08600051@default:1] Dial("SIP/cc114-00000017", "IAX2/ASTblind:test@127.0.0.1:41569/68600051|55|To") in new stack
-- Called ASTblind:test@127.0.0.1:41569/68600051
[Mar 25 13:26:16] NOTICE[5538]: chan_iax2.c:4050 __auto_congest: Auto-congesting call due to slow response
-- IAX2/127.0.0.1:41569-10750 is circuit-busy
-- Hungup 'IAX2/127.0.0.1:41569-10750'
== Everyone is busy/congested at this time (1:0/1/0)
== Auto fallthrough, channel 'SIP/cc114-00000017' status is 'CONGESTION'
-- Executing [h@default:1] DeadAGI("SIP/cc114-00000017", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0-----CONGESTION----------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0




server ubuntu server 8.0.4
vicidial version 2.0.5
asterisk 1.4-vici

[mhido]

ubuntu-server*CLI> iax2 show registry
Host dnsmgr Username Perceived Refresh State
127.0.0.1:41569 N ASTblind <Unregistered> 60 Request Sent
127.0.0.1:40569 N ASTloop <Unregistered> 60 Request Sent


iax.con:


[general]
bindport=4569 ; bindport and bindaddr may be specified
bindaddr=0.0.0.0 ; more than once to bind to multiple
;iaxcompat=yes
;nochecksums=no
delayreject=yes
;amaflags=default
adsi=no
;accountcode=vicidial
language=en
mohinterpret=passthrough
mohsuggest=default
disallow=all
allow=ulaw
allow=gsm
jitterbuffer=yes
forcejitterbuffer=no
maxjitterbuffer=1000
maxjitterinterps=10
resyncthreshold=1000
trunkfreq=20 ; How frequently to send trunk msgs (in ms)
trunktimestamps=yes
minregexpire = 60
maxregexpire = 360
iaxthreadcount = 50
iaxmaxthreadcount = 250
;register => marko:secretpass@tormenta.linux-support.net
;register => joe@remotehost:5656
;register => marko:[torkey]@tormenta.linux-support.net
;register => user:pass@iaxtel.com
;register => FWDNumber:passwd@iax.fwdnet.net
authdebug=no
regcontext=default
autokill=yes
codecpriority=host
allowfwdownload=no
;rtcachefriends=yes ; Cache realtime friends by adding them to the internal list
;rtupdate=yes ; Send registry updates to database using realtime? (yes|no)
;rtautoclear=yes ; Auto-Expire friends created on the fly on the same schedule
;rtignoreregexpire=yes ; When reading a peer from Realtime, if the peer's registration

#include iax-vicidial.conf

;register => 1112223333:PASSWORD@iax.binfone.com
register => ASTloop:test@127.0.0.1:40569
register => ASTblind:test@127.0.0.1:41569

[vicihelp]
host=67.134.219.20 ;voip.vicidial-group.com
type=friend
context=opengateway

disallow=all
allow=gsm
allow=ulaw
permit=67.134.219.20/255.255.255.255
insecure=very

[ASTloop]
type=friend
accountcode=ASTloop
context=default
auth=plaintext
host=dynamic
permit=0.0.0.0/0.0.0.0
secret=test
disallow=all
allow=ulaw
qualify=yes

[ASTblind]
type=friend
accountcode=ASTblind
context=default
auth=plaintext
host=dynamic
permit=0.0.0.0/0.0.0.0
secret=test
disallow=all
allow=ulaw
qualify=yes

[mhido]

i found the solution

[circuit]

Mhido,

What was your solution? How did you fix it?

[gservices]

SAme problem, but you must post the solution...