ast_request: No channel type registered chanel 'Zap'

[prabhakar_asterisk]

Hi

I am getting error lile this while dialing out from vicidial ..i can call manually from asterisk:
Nov 24 18:04:23 WARNING[6736]: channel.c:2597 ast_request: No channel type registered chanel 'Zap'
Nov 24 18:04:23 NOTICE[6736]: app_dial.c:1056 dial_exec_full: Unable to create )

[root@www ~]# ztcfg -vvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels configured.

[root@www ~]# lsmod | grep wcfxo
wcfxo 13088 0
zaptel 206852 5 wcfxo

www*CLI> show modules like meetme
Module Description Use Cou
app_meetme.so MeetMe conference bridge 0
1 modules loaded

My demesg output
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 9 (level, low) -> IRQ
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Wildcard X100P
Registered tone zone 28 (India)
Registered tone zone 28 (India)
Registered tone zone 28 (India)
Registered tone zone 28 (India)
Registered tone zone 28 (India)


I checked in google in asterisk archive mailing list it told to add unload => chan_zap.so in /etc/asterisk/modules.conf
Even after inserting the line I am getting the error and I couldnt make calls

Thanks
Prabhakar

[mflorell]

What kind of zaptel card do you have?

What kind of telco lines are you using to dial out?

Did you compile zaptel before compiling Asterisk?

[prabhakar_asterisk]

hi matt
i m using x100p card and i am using sip trunks for dialing out
i compiled zaptel first before compiling asterisk
thanks

[astvici]

Try
in your terminal
service zaptel start

[prabhakar_asterisk]

when i type service zaptel start i am get
zaptel : unrecognized service

[astvici]

u are using x100p right ?

then try this


modprobe zaptel
modprobe wcfxo

service zaptel start

[Op3r]

modprobe zaptel
modprobe wcfxo

service zaptel start

service zaptel start is only accepted if you compile it as a service

Do this

ztcfg -vvvvvv

[prabhakar_asterisk]

hi edwin,

this is the output

[root@www ~]# ztcfg -vvvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels configured.

[Op3r]

then that should work...

look at your extensions.conf youre not supposed to be using zap to dial because ur using voip

[prabhakar_asterisk]

my extension.conf looks fine and i can dial out manually using asterisk.
i m getting error something like this
channel.c:2597 ast_request: No channel type registered chanel ' '
its not showing any channel

Thanks