All installation and configuration problems and questions
Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N
by enjay » Mon Nov 27, 2006 1:14 pm
I have a hopper set to 200 and for some reason the hopper level is increasing to well over 1000. I have lowered the hopper to 100 and then I run out of leads.
Any ideas?
-
enjay
-
- Posts: 806
- Joined: Mon Jun 19, 2006 12:40 pm
- Location: Utah
-
by mflorell » Mon Nov 27, 2006 1:16 pm
if you do a "SELECT * from vicidial_hopper;" do you see a lot of leads that have been reserved?
Do you have more than one server with AST_VDauto_dial.pl running on it?
-
mflorell
- Site Admin
-
- Posts: 18384
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by enjay » Mon Nov 27, 2006 2:13 pm
I just cleared out the hopper manually (before I read this) I will check next time it gets up there.. I will tell you the vicidial_hopper table had -
- Code: Select all
mysql> delete from vicidial_hopper;
Query OK, 4734 rows affected (0.01 sec)
Yes I have 2 servers running AST_VDauto_dial.pl
-
enjay
-
- Posts: 806
- Joined: Mon Jun 19, 2006 12:40 pm
- Location: Utah
-
by mflorell » Mon Nov 27, 2006 3:51 pm
what did the records look like before you deleted them?
Sometimes when Asterisk is not running or has just crashed, the auto_dial process will try to lace calls ad reserver leads in the hopper that don't get cleared out properly. That's the only time I've had problems with this.
-
mflorell
- Site Admin
-
- Posts: 18384
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by enjay » Mon Nov 27, 2006 5:54 pm
the table looks like:
- Code: Select all
| 2370149 | 2594787 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370150 | 2576969 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370191 | 2561050 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370167 | 2622348 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370292 | 2508415 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370295 | 2539541 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370296 | 2550489 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370366 | 2601539 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370412 | 2565725 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370317 | 2523223 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370318 | 2534207 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
| 2370560 | 2530054 | 1000 | QUEUE | VDAD_192.168.0.5 | 1227 | 0.00 | AZ |
+-----------+---------+-------------+--------+------------------+---------+----------------+-------+
obviously alot more but thats it..
834 entries in the hopper with campaign 1000 id - hopper level of 200.
asterisk has not recently crashed or anything.
-
enjay
-
- Posts: 806
- Joined: Mon Jun 19, 2006 12:40 pm
- Location: Utah
-
by mflorell » Tue Nov 28, 2006 7:38 am
For some reason it looks like 192.168.0.5 is reserving a lot of leads and not dialing them. I have not seen this happen this bad before, but the most recent release will now clear the reserved leads as well as all other leads in the hopper for a campaign when you clear the hopper from the campaign screen.
-
mflorell
- Site Admin
-
- Posts: 18384
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by enjay » Tue Nov 28, 2006 10:52 am
Yea rather abnormal this would happen just "all of a sudden" oh well I will update this evening and see if that resolves the issue..
-Art
-
enjay
-
- Posts: 806
- Joined: Mon Jun 19, 2006 12:40 pm
- Location: Utah
-
Return to Support
Who is online
Users browsing this forum: Baidu [Spider] and 122 guests