vicidial.org

by **covarrubiasgg** » Sun Nov 14, 2010 3:51 pm

Hi, i have installed a fresh Vicibox Redux 3.0.6.iso. I need to configure a special signaling for my country (MFC/R2) wich is supported by asterisk 1.6.2, but our lovely vicidial have to work with 1.4 so i need to patch asterisk with libopenr2 (http://www.libopenr2.org/) to get it working with that signaling.

I alredy setup the signaling and my E1 is properly configured (tested with libr2 test utils) but asterisk doesnt "know" how to use mfcr2 thats why i have to patch the asterisk sources, i alredy done that, recompile asterisk and make install again, restart vicidial but the patch does not work.

Dont be confused i am not asking help to configure the signaling, i just want to know if there is any special procedure to patch asterisk on vicibox redux.

This are the steps i am doing.

Code: Select all: Cd into the source directory /usr/src/asterisk-1.4.27.1-vici Apply the patch patch -p0 < patch compile asterisk again make Install patched version of asterisk make install restart vicidial (so asterisk too) /etc/init.d/vicidial restart

Doing the same steps on a Debian from scratch installation it is working. How do i know if the patch work? because when asterisk is patched i can use mfcr2 applications such as

Code: Select all: mfcr2 show channels

by **williamconley** » Sun Nov 14, 2010 4:18 pm

thank you for listing all your specifications (although "no updates" is kinda confusing does that mean you didn't choose OS update during install?

)

First I would recommend rebooting instead of just restarting vicidial to be SURE asterisk has really been restarted.

If that fails, find out what files are being patched, and visually (use nano) verify that the changes were actually made.

the location of a file on this system may be different or the location of an item within the file may be different causing the patch to fail as the vicidial version of asterisk already has patches applied. This patch may be failing as a result.

So find out what file(s) are being altered (using your other test box that WORKED) and ensure all the changes are also being made in the Vicidial machine.

by **covarrubiasgg** » Sun Nov 14, 2010 4:40 pm

Hey Will thanks for that quick reply.

Yes by no updates i mean no OS updates.

I actually check the files with nano and the files were patched, but checking the logs, the patch defnie some vars for the libs and include to use during compilation, i changed them to the absolute path and now when i check the logs after compilation there is no error, still not working but i made a mess trying to figured how to get it working, now, i will reinstall to work again with a fresh install and try to do it right this time.

by **williamconley** » Sun Nov 14, 2010 9:18 pm

yep. troubleshooting is fun. and installing LOTS of times makes it work. never fear starting over.

also remember that when you are done, should you ever need to build another machine, having a good "solid" install method will be important so you don't have to go through the learning curve again.

be sure to POST your solution (so when you lose it, it'll be here waiting) i mean so others can benefit from your experience!

by **covarrubiasgg** » Mon Nov 15, 2010 2:06 pm

Hey William finally i get it working =)

For future references as you suggested these are the steps i follow up to get it working

Installation scenario:
- Vicibox Redux 3.0.6
- Hardware Sangoma A102E

1) Install vicibox redux as normal
2) Install vicidial using vicidial-install

3) Install libopenr2 (its important to install vicidial before because this libs depends on dahdi)
get the lastest version of libopenr2 form here:
http://code.google.com/p/openr2/downloads/list
a) download it to /usr/src
b) extract it tar xvzf libopenr2.tar.gz
c) cd libopenr2
e) ./configure
f) make
g) make install
h) ldconfig (IMPORTANT if you dont do this, the new installed libraries will not be loaded on the system)

4) Patch asterisk
a) cd /usr/src/asterisk-1.4.21.1-vici
b) wget http://code.google.com/p/openr2/downloa ... h&can=2&q=
c) apply the patch: patch -p0 < openr2-asterisk-1.4.32-p1.patch
d) execute ./bootstrap.sh (EXTREMLY IMPORTANT anything below is going to work if you skip this)
e) ./configure
f) make
g) make install

5) Configure wanrouter (wich has been installed from vicidial-install script)
a) execute wancfg (this will generate /etc/wanpipe/wanpipe1.conf)
b) execute wancfg_dahdi (this will generate a template for /etc/dahdi/system.com and /etc/asterisk/chan_dahdi.con)
c) edit your chan_dahdi.conf and system.conf according to your country. You can find propper documentacion on the docs/asterisk directory in your libopenr2 sources. For my country the file reads like this

;;;;;; Configuration for Mexico ;;;;;;;;;;
; zapata.conf or chan_dahdi.conf in /etc/asterisk
signalling=mfcr2
mfcr2_variant=mx
mfcr2_get_ani_first=no
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
; this is for debugging purposes
mfcr2_logdir=log
mfcr2_logging=all
; end debugging configuration
channel => 1-15
channel => 17-31

; /etc/dahdi/system.conf or /etc/zaptel.conf
span=1,1,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
loadzone=us
defaultzone=us

span=2,1,0,cas,hdb3
cas=32-46:1101
cas=48-62:1101
loadzone=us
defaultzone=us

6) Restart vicidial
/etc/init.d/vicidial restart

If everythings is well configure, after restart you will be able to see something like this on your CLI:

Code: Select all: vicibox*CLI> mfcr2 show channels Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS Rx CAS 1 MX 10 4 No No IDLE IDLE 2 MX 10 4 No No IDLE IDLE 3 MX 10 4 No No IDLE IDLE 4 MX 10 4 No No IDLE IDLE 5 MX 10 4 No No IDLE IDLE 6 MX 10 4 No No IDLE IDLE 7 MX 10 4 No No IDLE IDLE 8 MX 10 4 No No IDLE IDLE 9 MX 10 4 No No IDLE IDLE 10 MX 10 4 No No IDLE IDLE 11 MX 10 4 No No IDLE IDLE 12 MX 10 4 No No IDLE IDLE 13 MX 10 4 No No IDLE IDLE 14 MX 10 4 No No IDLE IDLE 15 MX 10 4 No No IDLE IDLE 17 MX 10 4 No No IDLE IDLE 18 MX 10 4 No No IDLE IDLE 19 MX 10 4 No No IDLE IDLE 20 MX 10 4 No No IDLE IDLE 21 MX 10 4 No No IDLE IDLE 22 MX 10 4 No No IDLE IDLE 23 MX 10 4 No No IDLE IDLE 24 MX 10 4 No No IDLE IDLE 25 MX 10 4 No No IDLE IDLE 26 MX 10 4 No No IDLE IDLE 27 MX 10 4 No No IDLE IDLE 28 MX 10 4 No No IDLE IDLE 29 MX 10 4 No No IDLE IDLE 30 MX 10 4 No No IDLE IDLE 31 MX 10 4 No No IDLE IDLE

by **williamconley** » Mon Nov 15, 2010 2:22 pm

MX? So this is for Mexico? Good to know ... what telecom are you connecting to that you needed this signalling?

Excellent solution post by the way!

by **covarrubiasgg** » Mon Nov 15, 2010 3:54 pm

williamconley wrote:MX? So this is for Mexico? Good to know ... what telecom are you connecting to that you needed this signalling?

This is hard to say since this is not a conventional telecom, this is our client and we are connected with them through serveral E1s with their telephony system (avaya i think).

But here in México (and many countries in latin america) there are serveral carriers using MFC/R2 such as Telmex, Avantel and Axtel.

by **Kumba** » Mon Nov 15, 2010 5:15 pm

I'll put this on the list to include in ViciBox Redux v.3.1. Thanks for the detailed instructions on what makes it work. That makes it all really simple and easy for me to include in future versions of ViciBox Redux.

And just an FYI for everyone else reading this: This is a good example of how you can get your own additions added to ViciBox. If you send me straight-forward steps/commands like this, I can make sure it gets included.

by **covarrubiasgg** » Mon Nov 15, 2010 5:25 pm

Kumba wrote:I'll put this on the list to include in ViciBox Redux v.3.1. Thanks for the detailed instructions on what makes it work. That makes it all really simple and easy for me to include in future versions of ViciBox Redux.

And just an FYI for everyone else reading this: This is a good example of how you can get your own additions added to ViciBox. If you send me straight-forward steps/commands like this, I can make sure it gets included.

Yei ñ_ñ, that would be really nice

.

Cheers!

vicidial.org

Patching asterisk on redux 3.0.6

Patching asterisk on redux 3.0.6

Who is online