Sip show Registry

[gmcust3]

When I do Sip show Registry , It shows me Auth. Sent.

But when I dial a Number using the same Prefix, calls is Going.

What can be the reason for NOT showing the Registered ?

[williamconley]

1) firewall
2) you have NOT used the same exact account settings for your dial as you used for your registration
3) your provider does not allow registration

Happy Hunting

[gmcust3]

1) No Firewall Activated on the Server
2) you have NOT used the same exact account settings for your dial as you used for your registration !!! DIDNT Understand.
3) Need to check ..

[williamconley]

show your account entry and dial plan and registration string.

i didn't say "firewall ON the server", please tell me you do have either a hardware or software firewall between the server and the internet? (if not, please tell me your server's IP address, I'd like to demonstrate something for you ... )

[gmcust3]

Server is off Now.
Will Post the content tomorrow.

No hardware or software firewall between the server and the internet. Only Beetel ADSL model.

Server Is NOT on public/static IP.
Server get always On Internet.

[williamconley]

if the server is not on a public ip, then there IS a firewall (aka: router or NAT). this is one of your possible issues. the returning packet must traverse this device to get to your server. the packet cannot go directly to your server unless it is on an internet public ip. a device must somehow transfer these packets to your internal network. this adds a layer of confusion.

you may also need to set externip=???? (to the external ip address of your router) in sip.conf

Server get always On Internet

having a gateway available is not (arguably) the same thing as being "on the internet" (even if you are in the "DMZ")