specific ip not working in multiserver setup

[xysm]

Hello..

i have a multi-server setup with lots of dialer boxes, and have a problem with one of the boxes (dialer03). when users try to login using this box, they get the "noone is in their session" error.. however, if i change the ip of the box it works...

anyone else ever have such an issue?

its not being blocked by the db server, i did try a 'mysqladmin flush-hosts'

i have no idea what would be causing this.. i know i could just use a different ip, but i would rather solve this then put a bandaid on it..

thanks for any help you guys can give..

// xysm

[Op3r]

have a multi-server setup with lots of dialer boxes, and have a problem with one of the boxes (dialer03). when users try to login using this box, they get the "noone is in their session" error.. however, if i change the ip of the box it works...


are you sure the extensions are registered to that box?
what version of VICIDIAL are you using?

can you clarify the question?

[xysm]

ok, i have 15 boxes, with ips .101 to .115

all registered to each other.. the problem is specific to .103

they are all setup the same using a ks.

i am using version 2.0.2b1

and what i mean, is say i take down .101 and change .103 to .101, and adjust astguiclient.conf, iax.conf and extensions.conf to reflect the new ip. the box works just fine.

now if i take .101, which was working, and do the same changes to make it .103, it doesnt work..

the server exists in the servers table, i tried deleting it and readding it.. still nothing..

does this explain it better?

[Op3r]

have you also changed your phones to reflect the ip of the server?

[xysm]

that is correct, i have set phones for each ip... so when testing 103 i would use phone21-30. when testing 101 use phone1-10

[Op3r]

can you post your asterisk cli output when you try to do it?

[xysm]

== Manager 'sendcron' logged on from 127.0.0.1
> Channel SIP/phone30-00a97760 was answered.
-- Executing MeetMe("SIP/phone30-00a97760", "8600095") in new stack
== Parsing '/etc/asterisk/meetme.conf': Found
-- Created MeetMe conference 1023 for conference '8600095'
-- Playing 'conf-onlyperson' (language 'en')
== Manager 'sendcron' logged off from 127.0.0.1


then after 40 seconds or so, get the noone in your session error. and no output reflecting this in the CLI

[mflorell]

This is most likely a server_ip setting issue somewhere in your database. double-check all settings in admin.php as well as your /etc/astguiclient.conf file for that server.