vicidial.org

by **Trying** » Thu Jan 06, 2011 7:27 am

Trust me to find the issues

I have installed 3.1.3 64bit version now. When I want to run wancfg_dahdi I get a Sangoma card not found error on all four of my dialers. This is the first time that I experienced this using the Vicibox installation. I did choose "y" during installation that there is in fact a card installed.

These are the errors during boot:

udevd(320) : invalid rule ' /etc/udev/rules.d/dahdi.rules:3'
udevd(320) : invalid KERNEL operation
udevd(320) : invalid rule ' /etc/udev/rules.d/dahdi.rules:5'
udevd(320) : invalid KERNEL operation
udevd(320) : invalid rule ' /etc/udev/rules.d/dahdi.rules:7
udevd(320) : invalid KERNEL operation'
udevd(320) : invalid rule ' /etc/udev/rules.d/dahdi.rules:8'
udevd(320) : invalid SUBSYSTEM operation
udevd(320) : invalid rule ' /etc/udev/rules.d/dahdi.rules:11'
Loading drivers, configuring devices :25.904704) iTCO_wdt: cannot register miscdev on minor+130 (err-16)

by **mflorell** » Thu Jan 06, 2011 9:16 am

Are all 4 of your dialers using the same Sangoma card?

Model number?
Firmware version?

by **Trying** » Thu Jan 06, 2011 9:21 am

Yes, they are all the same cards bought at different times:

Sangoma A102D/E1
Sorry but where do I see the firmware version?

I installed most of the Vicibox Redux 3 versions using these cards with no issues.

by **Trying** » Thu Jan 06, 2011 11:08 am

It seems the problem is much deeper than that. Asterisk is not active on any of my dialers either:

dialer2:~ # asterisk -r
Asterisk 1.4.38-vici, Copyright (C) 1999 - 2010 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
dialer2:~ # screen -ls
There is a screen on:
2531.ASTfastlog (Detached)
1 Socket in /var/run/screens/S-root.

I can manually start Asterisk but upon reboot it is not started.

by **Kumba** » Thu Jan 06, 2011 1:29 pm

Show me the output of the following commands:

wanrouter hwprobe
chkconfig vicidial

by **Trying** » Thu Jan 06, 2011 1:36 pm

wanrouter: Wanpipe Module: /lib/modules/2.6.34.7-0.7-default/kernel/drivers/net/wan/sdladrv not found !!!!
WANPIPE drivers must be compiled as modules
Check kernel configuration in /usr/src/linux/.config:
CONFIG_WAN_ROUTER=m
CONFIG_VENDOR_SANGOMA=m

chkconfig vicidial
vicidial: unknown service
You have new mail in /var/mail/root

by **Kumba** » Thu Jan 06, 2011 2:23 pm

Can you show me the output of "df -h" please. It sounds like you haven't installed it to the hard-drive. I have no clue how it cannot find vicidial.

by **Trying** » Thu Jan 06, 2011 2:27 pm

Filesystem Size Used Avail Use% Mounted on
/dev/sda2 455G 2.2G 430G 1% /
devtmpfs 2.0G 156K 2.0G 1% /dev
tmpfs 2.0G 4.0K 2.0G 1% /dev/shm
tmpfs 2.0G 0 2.0G 0% /var/spool/asterisk/monitor

by **williamconley** » Thu Jan 06, 2011 2:31 pm

bet it's a kernel/folder issue ... somehow the kernel updated but the wanpipe is looking in the old folder, or maybe it didn't and it's looking in the new folder. bumped into that with gentoo all the time during compiles.

by **Kumba** » Thu Jan 06, 2011 2:36 pm

That doesn't explain how 'chkconfig vicidial' is coming back wrong. The output should be like this:

dial1:~ # chkconfig vicidial
vicidial on

Where it either says vicidial off or vicidial on. It's saying it can't find vicidial, which means the init script isn't even there. That's just broken.

by **williamconley** » Thu Jan 06, 2011 3:05 pm

true enough. and likely a notice in "You have new mail in /var/mail/root" about how the startup script couldn't be found

by **Trying** » Fri Jan 07, 2011 5:36 am

I downloaded new 3.1.3 64bit disks and installed on all the servers. The same issues remain on all the servers.

I still get the following errors even when initially booting from the disk:

udevd(320) : invalid rule ' /etc/udev/rules.d/dahdi.rules:3'
udevd(320) : invalid KERNEL operation
udevd(320) : invalid rule ' /etc/udev/rules.d/dahdi.rules:5'
udevd(320) : invalid KERNEL operation
udevd(320) : invalid rule ' /etc/udev/rules.d/dahdi.rules:7
udevd(320) : invalid KERNEL operation'
udevd(320) : invalid rule ' /etc/udev/rules.d/dahdi.rules:8'
udevd(320) : invalid SUBSYSTEM operation
udevd(320) : invalid rule ' /etc/udev/rules.d/dahdi.rules:11'
Loading drivers, configuring devices :25.904704) iTCO_wdt: cannot register miscdev on minor+130 (err-16)

When I get to installing the telephony server I immediately get the vicidial:unknown service.

Configuring Telephony pre-requisites
vicidial: unknown service

All the messages in var/spool/mail/root are "problem connecting to "localhost", port 5038:"

by **Trying** » Fri Jan 07, 2011 8:41 am

I now tried the 32bit disk. Vicidial is on but I still get the Kernel errors and wancfg_dahdi resulting in No Sangoma voice compatible cards found/configured.

by **williamconley** » Fri Jan 07, 2011 9:07 am

did you watch your install for errors and did you check your install log?

show your "install parameters" for both your os and vicidial installs (just the summaries at the end, of course, not the whole shebang)

by **Trying** » Fri Jan 07, 2011 9:37 am

You stumped me......... Where do I find the install logs? They are not in var/log?

by **williamconley** » Fri Jan 07, 2011 9:50 am

sure they are ... /var/log/vicibox.log and zypper.log

by **Trying** » Fri Jan 07, 2011 11:14 am

Ahhh, ok thanks. I saw no errors during installation.

vicibox.log:

SuSEfirewall2: batch committing...
SuSEfirewall2: Firewall rules unloaded.
Specified lock has been successfully added.
Time synchronized with 0.north-america.pool.ntp.org
Starting network time protocol daemon (NTPD)..done
no crontab for root
Syntax OK
Starting httpd2 (prefork) ..done
Audio Sync Settings not active, Exiting

zypper.log (I really don't know what is the important bit in here so I am posting the whole shebang

)

[quote]2011-01-07 12:13:45 <1> dialer1(8010) [zypper] main.cc(main):75 ===== Hi, me zypper 1.4.8 built Nov 17 2010 00:41:06 =====
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] main.cc(main):76 ===== 'zypper' 'refresh' =====
2011-01-07 12:13:45 <1> dialer1(8010) [zconfig] ZConfig.cc(_autodetectSystemArchitecture):59 Uname architecture is 'x86_64'
2011-01-07 12:13:45 <1> dialer1(8010) [zconfig] ZConfig.cc(_autodetectTextLocale):164 Default text locale is 'en'
2011-01-07 12:13:45 <1> dialer1(8010) [zconfig] ZConfig.cc(Impl):272 libzypp: 7.9.6 built Nov 17 2010 00:22:38
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/zypp.conf[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/zypp.conf[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#1|/etc/zypp/zypp.conf}END
2011-01-07 12:13:45 <1> dialer1(8010) [zconfig] ZConfig.cc(Impl):475 ZConfig singleton created.
2011-01-07 12:13:45 <1> dialer1(8010) [zconfig] ZConfig.cc(ZConfig):566 libzypp: 7.9.6 built Nov 17 2010 00:22:38
2011-01-07 12:13:45 <1> dialer1(8010) [zconfig] ZConfig.cc(ZConfig):566 satsolver: 0.15.2
2011-01-07 12:13:45 <1> dialer1(8010) [zconfig] ZConfig.cc(ZConfig):566 zypp.conf: '/etc/zypp/zypp.conf'
2011-01-07 12:13:45 <1> dialer1(8010) [zconfig] ZConfig.cc(ZConfig):566 TextLocale: 'en' (en)
2011-01-07 12:13:45 <1> dialer1(8010) [zconfig] ZConfig.cc(ZConfig):566 SystemArchitecture: 'x86_64' (x86_64)
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Zypper.cc(Zypper):76 Zypper instance created.
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] media.h(MediaCallbacks):237 Set media callbacks..
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Zypper.cc(processGlobalOptions):316 START
2011-01-07 12:13:45 <5> dialer1(8010) [Measure] Measure.cc(Impl):145 START MEASURE(ReadConfig)
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Augeas.cc(Augeas):21 Going to read zypper config using Augeas...
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Augeas.cc(Augeas):106 Done reading conf files:
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Augeas.cc(Augeas):111 user conf read: no
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Augeas.cc(Augeas):112 global conf read: yes
2011-01-07 12:13:45 <5> dialer1(8010) [Measure] Measure.cc(elapsed):167 ELAPSED(ReadConfig) 0 (u 0.01 s 0.00 c 0.00)
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/main/*/showAlias = false
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/main/1/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/solver/*/installRecommends = yes
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/solver/2/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/solver/*/forceResolutionCommands = remove
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/solver/3/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/useColors = never
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/4/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/background = dark
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/5/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/result = white
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/6/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/msgStatus = grey
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/7/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/msgError = red
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/8/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/msgWarning = yellow
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/9/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/positive = green
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/10/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/negative = red
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/11/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/highlight = lightcyan
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/12/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/promptOption = grey
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/13/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/obs/*/baseUrl = http://download.opensuse.org/repositories/
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/obs/14/commented: true
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/obs/*/platform = openSUSE_11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/obs/15/commented: true
2011-01-07 12:13:45 <5> dialer1(8010) [Measure] Measure.cc(~Impl):153 MEASURE(ReadConfig) 0 (u 0.01 s 0.00 c 0.00) [0 (u 0.00 s 0.00 c 0.00)]
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Zypper.cc(processGlobalOptions):420 Verbosity 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Zypper.cc(processGlobalOptions):421 Output type 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Zypper.cc(processGlobalOptions):528 repos.d dir = /etc/zypp/repos.d
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Zypper.cc(processGlobalOptions):529 cache dir = /var/cache/zypp
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Zypper.cc(processGlobalOptions):530 raw cache dir = /var/cache/zypp/raw
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Zypper.cc(processGlobalOptions):531 solv cache dir = /var/cache/zypp/solv
2011-01-07 12:13:45 <1> dialer1(8010) [zypper++] Zypper.cc(processGlobalOptions):532 package cache dir = /var/cache/zypp/packages
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Zypper.cc(processGlobalOptions):544 Repositories enabled
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Zypper.cc(processGlobalOptions):716 DONE
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Zypper.cc(processCommandOptions):870 START
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Zypper.cc(processCommandOptions):2445 Done parsing options.
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Zypper.cc(processCommandOptions):2464 Done
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ZYppFactory.cc(lockFileExists):163 /var/run/zypp.pid{does not exist}
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppFactory.cc(zyppLocked):283 no lockfile /var/run/zypp.pid found
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppFactory.cc(zyppLocked):286 running as root. Will attempt to create /var/run/zypp.pid
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppFactory.cc(exLockFile):145 locked (exclusive)
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppFactory.cc(unLockFile):156 unlocked
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppFactory.cc(createLockFile):175 written lockfile with pid 8010
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppFactory.cc(shLockFile):134 locked (shared)
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppImpl.cc(ZYppImpl):45 libzypp: 7.9.6 built Nov 17 2010 00:22:38
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppImpl.cc(ZYppImpl):45 satsolver: 0.15.2
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppImpl.cc(ZYppImpl):45 zypp.conf: '/etc/zypp/zypp.conf'
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppImpl.cc(ZYppImpl):45 TextLocale: 'en' (en)
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppImpl.cc(ZYppImpl):45 SystemArchitecture: 'x86_64' (x86_64)
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppImpl.cc(ZYppImpl):46 Initializing keyring...
2011-01-07 12:13:45 <1> dialer1(8010) [zypp::KeyRing] KeyRing.cc(Impl):93 Current KeyRing::DefaultAccept: 0000000000
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] Zypper.cc(doCommand):2554 Going to process command 15
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] PathInfo.cc(readdir):574 readdir /etc/zypp/services.d
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(init_knownRepositories):546 start construct known repos
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_dir):241 directory /etc/zypp/repos.d
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] PathInfo.cc(readdir):574 readdir /etc/zypp/repos.d
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/openSUSE_11.3_OSS.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/openSUSE_11.3_OSS.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/openSUSE_11.3_OSS.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#2|/etc/zypp/repos.d/openSUSE_11.3_OSS.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : openSUSE_11.3_OSS
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : openSUSE_11.3_OSS
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://download.opensuse.org/distribution/11.3/repo/oss
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : yast2
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12 begin_of_the_skype_highlighting 1 2011-01-07 12 end_of_the_skype_highlighting:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/repo-oss.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/repo-oss.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/repo-oss.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#3|/etc/zypp/repos.d/repo-oss.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : repo-oss
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : openSUSE-11.3-Oss
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://download.opensuse.org/distributi ... /repo/oss/
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path : /
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : yast2
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 0
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/openSUSE_BuildService_-_devel_languages_perl.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/openSUSE_BuildService_-_devel_languages_perl.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/openSUSE_BuildService_-_devel_languages_perl.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#4|/etc/zypp/repos.d/openSUSE_BuildService_-_devel_languages_perl.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : openSUSE_BuildService_-_devel:languages:perl
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : openSUSE_BuildService_-_devel:languages:perl
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://download.opensuse.org/repositori ... nSUSE_11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : rpm-md
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/repo-debug.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/repo-debug.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/repo-debug.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#5|/etc/zypp/repos.d/repo-debug.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : repo-debug
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : openSUSE-11.3-Debug
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 0
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://download.opensuse.org/debug/dist ... /repo/oss/
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path : /
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : NONE
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 0
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/repo-non-oss.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/repo-non-oss.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/repo-non-oss.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#6|/etc/zypp/repos.d/repo-non-oss.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : repo-non-oss
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : openSUSE-11.3-Non-Oss
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://download.opensuse.org/distributi ... o/non-oss/
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path : /
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : yast2
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 0
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/repo-source.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/repo-source.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/repo-source.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#7|/etc/zypp/repos.d/repo-source.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : repo-source
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : openSUSE-11.3-Source
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 0
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://download.opensuse.org/source/dis ... /repo/oss/
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path : /
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : NONE
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 0
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/Updates for openSUSE 11.3 11.3-1.82.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/Updates for openSUSE 11.3 11.3-1.82.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/Updates for openSUSE 11.3 11.3-1.82.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#8|/etc/zypp/repos.d/Updates for openSUSE 11.3 11.3-1.82.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : Updates for openSUSE 11.3 11.3-1.82
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : Updates for openSUSE 11.3 11.3-1.82
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://download.opensuse.org/update/11.3/
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path : /
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : rpm-md
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 0
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/server_php_extensions_11.3.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/server_php_extensions_11.3.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/server_php_extensions_11.3.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#9|/etc/zypp/repos.d/server_php_extensions_11.3.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : server:php:extensions_11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : server:php:extensions_11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://download.opensuse.org/repositori ... nSUSE_11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : rpm-md
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/Packman_11.3.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/Packman_11.3.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/Packman_11.3.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#10|/etc/zypp/repos.d/Packman_11.3.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : Packman_11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : Packman_11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : rpm-md
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/home_vicidial_11.3.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/home_vicidial_11.3.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/home_vicidial_11.3.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#11|/etc/zypp/repos.d/home_vicidial_11.3.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : home:vicidial_11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : home:vicidial_11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://download.opensuse.org/repositori ... nSUSE_11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : rpm-md
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(repositories_in_file):223 repo file: /etc/zypp/repos.d/openSUSE_11.3_Updates.repo
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/repos.d/openSUSE_11.3_Updates.repo[g___]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/repos.d/openSUSE_11.3_Updates.repo[_eF_]
2011-01-07 12:13:45 <1> dialer1(8010) [Progress++] ProgressData.cc(report):86 {#12|/etc/zypp/repos.d/openSUSE_11.3_Updates.repo}END
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 --------------------------------------
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - alias : openSUSE_11.3_Updates
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - name : openSUSE_11.3_Updates
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - enabled : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - autorefresh : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - url : http://download.opensuse.org/update/11.3
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - path :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - type : rpm-md
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - priority : 99
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgcheck : 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - gpgkey :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - keeppackages: 1
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81 - service :
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoFileReader.cc(repositories_in_file):81
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RepoManager.cc(init_knownRepositories):567 end construct known repos
2011-01-07 12:13:45 <1> dialer1(8010) [zypper] repos.cc(refresh_repos):1037 going to refresh repositories
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] ZYppImpl.cc(initializeTarget):96 initTarget( /)
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] librpmDb.cc(globalInit):140 librpm init done: (_target:x86_64-linux) (_dbpath:/var/lib/rpm)
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(initDatabase):320 Calling initDatabase: '(/)/var/lib/rpm'
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] librpmDb.cc(unblockAccess):336 Unblock access
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] librpmDb.cc(DbDirInfo):542 '(/)/var/lib/rpm':
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] librpmDb.cc(DbDirInfo):542 Dir: /var/lib/rpm{d 0755 0/0}
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] librpmDb.cc(DbDirInfo):542 V4: /var/lib/rpm/Packages{- 0644 0/0 size 12595200}
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] librpmDb.cc(DbDirInfo):542 V3: /var/lib/rpm/packages.rpm{does not exist}
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] librpmDb.cc(DbDirInfo):542 V3ToV4: /var/lib/rpm/packages.rpm3{does not exist}
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(internal_initDatabase):437 Found rpm4 database in /var/lib/rpm{d 0755 0/0}
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] RpmDb.cc(internal_initDatabase):454 Initial state: V4(X--)V3(---): '(/)/var/lib/rpm'[librpmDb CLOSED '(/)/var/lib/rpm']
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] librpmDb.cc(dbAccess):232 Set new database location: '(/)/var/lib/rpm'
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] RpmDb.cc(internal_initDatabase):473 Access state: V4(X--)V3(---): '(/)/var/lib/rpm'[ReferenceCounted(@0x7cd400<=1){NULL(/)/var/lib/rpm}]
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(initDatabase):393 Syncronizing keys with zypp keyring
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(importZyppKeyRingTrustedKeys):823 Importing zypp trusted keyring
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing '/usr/bin/gpg2' '--no-default-keyring' '--quiet' '--list-public-keys' '--with-colons' '--with-fingerprint' '--no-tty' '--no-greeting' '--batch' '--status-fd' '1' '--homedir' '/var/tmp/zypp.4BFaSo/zypp-trusted-krAE7MAf'
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8012 launched
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8012 successfully completed
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):860 Exporting rpm keyring into zypp trusted keyring
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing '/usr/bin/gpg2' '--no-default-keyring' '--quiet' '--list-public-keys' '--with-colons' '--with-fingerprint' '--no-tty' '--no-greeting' '--batch' '--status-fd' '1' '--homedir' '/var/tmp/zypp.4BFaSo/zypp-trusted-krAE7MAf'
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8013 launched
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8013 successfully completed
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key a1912208-446a0899 to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key dcef338c-4c5829bd to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key ddcd7f1a-4d13696e to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key 0dfb3188-41ed929b to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key 1abd1afb-4c97c60c to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key 3d25d3d9-36e12d04 to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key 3dbdc284-4be1884d to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key 7e2e3b05-4be037ca to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key 9c800aca-4be01999 to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key 56b4177a-4be18cab to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key 243e29fd-4c66e501 to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(exportTrustedKeysInZyppKeyRing):887 Will export trusted key 307e3d54-4be01a65 to zypp keyring.
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing '/usr/bin/gpg2' '--no-default-keyring' '--quiet' '--no-tty' '--no-greeting' '--no-permission-warning' '--status-fd' '1' '--homedir' '/var/tmp/zypp.4BFaSo/zypp-trusted-krAE7MAf' '--import' '/var/tmp/zypp.4BFaSo/TmpFile.s59wcX'
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8014 launched
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8014 successfully completed
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] PathInfo.cc(unlink):670 unlink /var/tmp/zypp.4BFaSo/TmpFile.s59wcX
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] TmpPath.cc(~Impl):78 TmpPath cleaned up /var/tmp/zypp.4BFaSo/TmpFile.s59wcX{- 0600 0/0 size 16158}
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] RpmDb.cc(initDatabase):404 InitDatabase: RpmDb[V4(X--)V3(---): '(/)/var/lib/rpm']
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] HistoryLog.cc(setRoot):137 installation log file /var/log/zypp/history
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing '/usr/bin/uuidgen'
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8015 launched
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] TargetImpl.cc(generateRandomId):574 f1f565ba-f393-43c3-98a5-edf346655e57
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] TargetImpl.cc(generateRandomId):574
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8015 successfully completed
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] TargetImpl.cc(TargetImpl):551 Initialized target on /
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] TargetImpl.cc(buildCache):723 Read cookie: /var/cache/zypp/solv/@System/cookie{- 0644 0/0 size 53}
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] TargetImpl.cc(buildCache):730 Read cookie: /var/cache/zypp/solv/@System/cookie says: outdated
2011-01-07 12:13:45 <1> dialer1(8010) [zypp] TargetImpl.cc(buildCache):795 Executing: 0x7fffbf779a48
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing '/bin/sh' '-c' 'rpmdb2solv -r '/' -p '/etc/products.d' '/var/cache/zypp/solv/@System/solv' > '/var/cache/zypp/solv/@System/solvWtZ2dO''
2011-01-07 12:13:45 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8016 launched
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8016 successfully completed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] PathInfo.cc(rename):684 rename /var/cache/zypp/solv/@System/solvWtZ2dO -> /var/cache/zypp/solv/@System/solv
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] PathInfo.cc(chmod):1027 chmod /var/cache/zypp/solv/@System/solv 00644
2011-01-07 12:13:46 <1> dialer1(8010) [zypper] repos.cc(refresh_repo):1169 going to refresh repo 'Packman_11.3'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypper] misc.cc(is_changeable_media):96 Checking if this is a changeable medium
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAccess.cc(open):110 Trying scheme 'http'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing 'aria2c' '--version'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8018 launched
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8018 successfully completed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaCurl.cc(MediaCurl):394 MediaCurl::MediaCurl(http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3, )
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAria2c.cc(MediaAria2c):237 MediaAria2c::MediaAria2c(http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3, )
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing 'aria2c' '--version'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8019 launched
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8019 successfully completed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAccess.cc(open):169 Opened: http(http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3 not attached; localRoot "")
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(open):279 Opened new media access using id 1 to http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(close):311 Close to access handler using id 1 requested
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(release):700 Request to release media - not attached; eject ''
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAccess.cc(close):220 Close: http(http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3 not attached; localRoot "") (OK)
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(release):700 Request to release media - not attached; eject ''
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(release):700 Request to release media - not attached; eject ''
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(removeAttachPoint):178 MediaHandler - checking if to remove attach point
2011-01-07 12:13:46 <1> dialer1(8010) [zypper] repos.cc(refresh_repo):1187 calling refreshMetadata
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] RepoManager.cc(checkIfToRefreshMetadata):744 Going to try to check whether refresh is needed for http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaSetAccess.cc(rewriteUrl):385 Rewriting url http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAccess.cc(open):110 Trying scheme 'http'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing 'aria2c' '--version'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8020 launched
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8020 successfully completed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaCurl.cc(MediaCurl):394 MediaCurl::MediaCurl(http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3, )
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAria2c.cc(MediaAria2c):237 MediaAria2c::MediaAria2c(http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3, )
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing 'aria2c' '--version'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8021 launched
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8021 successfully completed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAccess.cc(open):169 Opened: http(http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3 not attached; localRoot "")
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(open):279 Opened new media access using id 2 to http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaSetAccess.cc(provide):201 Going to try to provide file /repodata/repomd.xml from media number 1
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(attach):415 attach(id=2)
2011-01-07 12:13:46 <2> dialer1(8010) [zypp] CurlConfig.cc(parseConfig):49 Not allowed to parse '/root/.curlrc': dir/file owner: 0/0, process uid: 0 (root)
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(createAttachPoint):393 Trying to create attach point in /var/adm/mount
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] PathInfo.cc(mkdir):315 mkdir /var/adm/mount/AP_0x00000001 00755
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaHandler.cc(createAttachPoint):370 Created default attach point /var/adm/mount/AP_0x00000001
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] Sysconfig.cc(read):31 Load '/etc/sysconfig/proxy'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] Sysconfig.cc(read):71 done reading '/etc/sysconfig/proxy'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaCurl.cc(attachTo):528 Proxy: -none-
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaHandler.cc(attach):647 Attached: http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3 attached; localRoot "/var/adm/mount/AP_0x00000001"
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(checkDesired):109 checkDesired(2): desired (report by zypp::media::NoVerifier)
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(checkDesired):112 checkDesired(2): desired (cached)
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing 'aria2c' '--user-agent=ZYpp 7.9.6 (aria2 version 1.9.1) ' '--summary-interval=1' '--follow-metalink=mem' '--check-integrity=true' '--file-allocation=none' '--server-stat-of=/var/cache/zypp/aria2.stats' '--server-stat-if=/var/cache/zypp/aria2.stats' '--uri-selector=adaptive' '--use-head=false' '--max-tries=5' '--max-concurrent-downloads=2' '--header=X-ZYpp-AnonymousId: e5794516-24d4-4e55-b486-828de97b93fa' '--header=X-ZYpp-DistributionFlavor:' '--header=Pragma:' '--connect-timeout=180' '--dir=/var/adm/mount/AP_0x00000001/repodata' 'http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3/repodata/repomd.xml'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8022 launched
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8022 successfully completed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(provideFile):971 provideFile(/repodata/repomd.xml)
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] RepoManager.cc(checkIfToRefreshMetadata):825 repo has not changed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] PathInfo.cc(touch):1142 touch /var/cache/zypp/raw/Packman_11.3/repodata/repomd.xml
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaSetAccess.cc(release):424 Releasing all media IDs held by this MediaSetAccess
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(release):488 release(id=2)
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(release):707 Request to release attached media http<http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3>, use count=1
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(release):714 Releasing media http<http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3>
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaHandler.cc(disconnect):686 Disconnected: http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3 attached; localRoot "/var/adm/mount/AP_0x00000001"
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(removeAttachPoint):178 MediaHandler - checking if to remove attach point
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] PathInfo.cc(recursive_rmdir):429 recursive_rmdir /var/adm/mount/AP_0x00000001
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaHandler.cc(removeAttachPoint):190 Deleted default attach point /var/adm/mount/AP_0x00000001
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaHandler.cc(release):768 Released: http://ftp.gwdg.de/pub/linux/misc/packman/suse/11.3 not attached; localRoot ""
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] PathInfo.cc(recursive_rmdir):429 recursive_rmdir /var/cache/zypp/raw/Packman_11.30svp7G
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] TmpPath.cc(~Impl):78 TmpPath cleaned up /var/cache/zypp/raw/Packman_11.30svp7G{d 0755 0/0}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypper] repos.cc(refresh_repo):1199 calling buildCache
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] RepoManager.cc(buildCache):1064 Packman_11.3 is already cached.
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] RepoManager.cc(buildCache):1069 Packman_11.3 cache is up to date with metadata.
2011-01-07 12:13:46 <1> dialer1(8010) [zypper] repos.cc(refresh_repo):1169 going to refresh repo 'Updates for openSUSE 11.3 11.3-1.82'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypper] misc.cc(is_changeable_media):96 Checking if this is a changeable medium
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAccess.cc(open):110 Trying scheme 'http'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing 'aria2c' '--version'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8024 launched
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8024 successfully completed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaCurl.cc(MediaCurl):394 MediaCurl::MediaCurl(http://download.opensuse.org/update/11.3/, )
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAria2c.cc(MediaAria2c):237 MediaAria2c::MediaAria2c(http://download.opensuse.org/update/11.3/, )
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing 'aria2c' '--version'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8025 launched
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8025 successfully completed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAccess.cc(open):169 Opened: http(http://download.opensuse.org/update/11.3/ not attached; localRoot "")
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(open):279 Opened new media access using id 3 to http://download.opensuse.org/update/11.3/
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(close):311 Close to access handler using id 3 requested
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(release):700 Request to release media - not attached; eject ''
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAccess.cc(close):220 Close: http(http://download.opensuse.org/update/11.3/ not attached; localRoot "") (OK)
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(release):700 Request to release media - not attached; eject ''
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(release):700 Request to release media - not attached; eject ''
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(removeAttachPoint):178 MediaHandler - checking if to remove attach point
2011-01-07 12:13:46 <1> dialer1(8010) [zypper] repos.cc(refresh_repo):1187 calling refreshMetadata
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] RepoManager.cc(checkIfToRefreshMetadata):744 Going to try to check whether refresh is needed for http://download.opensuse.org/update/11.3/
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaSetAccess.cc(rewriteUrl):385 Rewriting url http://download.opensuse.org/update/11.3/
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAccess.cc(open):110 Trying scheme 'http'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing 'aria2c' '--version'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8026 launched
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8026 successfully completed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaCurl.cc(MediaCurl):394 MediaCurl::MediaCurl(http://download.opensuse.org/update/11.3/, )
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAria2c.cc(MediaAria2c):237 MediaAria2c::MediaAria2c(http://download.opensuse.org/update/11.3/, )
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing 'aria2c' '--version'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8027 launched
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8027 successfully completed
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaAccess.cc(open):169 Opened: http(http://download.opensuse.org/update/11.3/ not attached; localRoot "")
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(open):279 Opened new media access using id 4 to http://download.opensuse.org/update/11.3/
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaSetAccess.cc(provide):201 Going to try to provide file /repodata/repomd.xml from media number 1
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(attach):415 attach(id=4)
2011-01-07 12:13:46 <2> dialer1(8010) [zypp] CurlConfig.cc(parseConfig):49 Not allowed to parse '/root/.curlrc': dir/file owner: 0/0, process uid: 0 (root)
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaHandler.cc(createAttachPoint):393 Trying to create attach point in /var/adm/mount
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] PathInfo.cc(mkdir):315 mkdir /var/adm/mount/AP_0x00000001 00755
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaHandler.cc(createAttachPoint):370 Created default attach point /var/adm/mount/AP_0x00000001
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] Sysconfig.cc(read):31 Load '/etc/sysconfig/proxy'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] Sysconfig.cc(read):71 done reading '/etc/sysconfig/proxy'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaCurl.cc(attachTo):528 Proxy: -none-
2011-01-07 12:13:46 <1> dialer1(8010) [zypp] MediaHandler.cc(attach):647 Attached: http://download.opensuse.org/update/11.3/ attached; localRoot "/var/adm/mount/AP_0x00000001"
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(checkDesired):109 checkDesired(4): desired (report by zypp::media::NoVerifier)
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] MediaManager.cc(checkDesired):112 checkDesired(4): desired (cached)
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):221 Executing 'aria2c' '--user-agent=ZYpp 7.9.6 (aria2 version 1.9.1) ' '--summary-interval=1' '--follow-metalink=mem' '--check-integrity=true' '--file-allocation=none' '--server-stat-of=/var/cache/zypp/aria2.stats' '--server-stat-if=/var/cache/zypp/aria2.stats' '--uri-selector=adaptive' '--use-head=false' '--max-tries=5' '--max-concurrent-downloads=2' '--header=X-ZYpp-AnonymousId: e5794516-24d4-4e55-b486-828de97b93fa' '--header=X-ZYpp-DistributionFlavor:' '--header=Pragma:' '--connect-timeout=180' '--dir=/var/adm/mount/AP_0x00000001/repodata' 'http://download.opensuse.org/update/11.3/repodata/repomd.xml'
2011-01-07 12:13:46 <1> dialer1(8010) [zypp++] ExternalProgram.cc(start_program):373 pid 8028 launched
2011-01-07 12:13:47 <1> dialer1(8010) [zypp++] ExternalProgram.cc(checkStatus):431 Pid 8028 successfully completed
2011-01-07 12:13:47 <1> dialer1(8010) [zypp++] MediaHandler.cc(provideFile):971 provideFile(/repodata/repomd.xml)
2011-01-07 12:13:47 <1> dialer1(8010) [zypp] RepoManager.cc(checkIfToRefreshMetadata):825 repo has not changed
2011-01-07 12:13:47 <1> dialer1(8010) [zypp] PathInfo.cc(touch):1142 touch /var/cache/zypp/raw/Updates for openSUSE 11.3 11.3-1.82/repodata/repomd.xml
2011-01-07 12:13:47 <1> dialer1(8010) [zypp++] MediaSetAccess.cc(release):424 Releasing all media IDs held by this MediaSetAccess
2011-01-07 12:13:47 <1> dialer1(8010) [zypp++] MediaManager.cc(release):488 release(id=4)
2011-01-07 12:13:47 <1> dialer1(8010) [zypp++] MediaHandler.cc(release):707 Request to release attached media http<http://download.opensuse.org/update/11.3/>, use count=1
2011-01-07 12:13:47 <1> dialer1(8010) [zypp++] MediaHandler.cc(release):714 Releasing media http<http://download.opensuse.org/update/11.3/>
2011-01-07 12:13:47 <1> dialer1(8010) [zypp] MediaHandler.cc(disconnect):686 Disconnected: http://download.opensuse.org/update/11.3/ attached; localRoot "/var/adm/mount/AP_0x00000001"
2011-01-07 12:13:47 <1> dialer1(8010) [zypp++] MediaHandler.cc(removeAttachPoint):178 MediaHandler - checking if to remove attach point
2011-01-07 12:13:47 <1> dialer1(8010) [zypp] PathInfo.cc(recursive_rmdir):429 recursive_rmdir /var/adm/mount/AP_0x00000001
2011-01-07 12:13:47 <1> dialer1(8010) [zypp] MediaHandler.cc(removeAttachPoint):190 Deleted default attach point /var/adm/mount/AP_0x00000001
2011-01-07 12:13:47 <1> dialer1(8010) [zypp] MediaHandler.cc(release):768 Released: http://download.opensuse.org/update/11.3/ not attached; localRoot ""
2011-01-07 12:13:47 <1> dialer1(8010) [zypp] PathInfo.cc(recursive_rmdir):429 recursive_rmdir /var/cache/zypp/raw/Updates for openSUSE 11.3 11.3-1.82UfR59B
2011-01-07 12:13:47 <1> dialer1(8010) [zypp++] TmpPath.cc(~Impl):78 TmpPath cleaned up /var/cache/zypp/raw/Updates for openSUSE 11.3 11.3-1.82UfR59B{d 0755 0/0}
2011-01-07 12:13:47 <1> dialer1(8010) [zypp++] librpmDb.cc(D):92 DBACCESS {NULL(/)/var/lib/rpm}
2011-01-07 12:13:47 <1> dialer1(8010) [zypp++] librpmDb.cc(dbRelease):303 dbRelease: release, outstanding 0
2011-01-07 12:13:47 <1> dialer1(8010) [zypper] repos.cc(refresh_repo):1199 callin

by **williamconley** » Fri Jan 07, 2011 12:15 pm

install again ... and

show your "install parameters" for both your os and vicidial installs (just the summaries at the end, of course, not the whole shebang)

and/or

Code: Select all: asterisk -vvvc

and see if you get the reason why asterisk will not start

and/or

Code: Select all: locate vicidial

verify that you have

Code: Select all: /etc/init.d/rc3.d/K01vicidial /etc/init.d/rc3.d/S09vicidial /etc/init.d/rc4.d/K01vicidial /etc/init.d/rc4.d/S09vicidial /etc/init.d/rc5.d/K01vicidial /etc/init.d/rc5.d/S09vicidial /etc/init.d/vicidial

by **Trying** » Fri Jan 07, 2011 12:30 pm

I will have to install on Monday again.

When I run asterisk -vvvc Asterisk starts fine and I don't see any errors.

/etc/init.d/rc3.d/K01vicidial
/etc/init.d/rc3.d/S09vicidial
/etc/init.d/rc4.d/K01vicidial
/etc/init.d/rc4.d/S09vicidial
/etc/init.d/rc5.d/K01vicidial
/etc/init.d/rc5.d/S09vicidial
/etc/init.d/vicidial

I do not have any of these.

by **williamconley** » Fri Jan 07, 2011 12:44 pm

When an install completes: (reboot!)

Code: Select all: screen -list

If you do not have more than 6 screens running ... your install was NOT successful

by **Trying** » Fri Jan 07, 2011 12:56 pm

Yes, I rebooted after each install and on all 4 my dialers screen -ls had no entries. Like I said the 32bit version seems to be fine except for not "seeing" my Sangoma cards. The issue is with the 64bit version. I will reinstall yet again on Monday. Thank you very much for the help.

by **williamconley** » Fri Jan 07, 2011 1:51 pm

you may need to "pick apart" your vicidial-install file and run the lines one at a time until you "crash" to find out where it's dying if you cannot find it in the vicibox.log

by **Trying** » Mon Jan 10, 2011 6:56 am

I now installed the 64bit version again on a single machine as I thought perhaps the multi-server install is breaking something.

Results:

dialer3:~ # screen -ls
There are screens on:
2686.ASTVDadapt (Detached)
2688.ASTfastlog (Detached)
3235.ASTVDauto (Detached)
3 Sockets in /var/run/screens/S-root.

dialer3:~ # wanrouter hwprobe

wanrouter: Wanpipe Module: /lib/modules/2.6.34.7-0.7-default/kernel/drivers/net/wan/sdladrv not found !!!!
WANPIPE drivers must be compiled as modules
Check kernel configuration in /usr/src/linux/.config:
CONFIG_WAN_ROUTER=m
CONFIG_VENDOR_SANGOMA=m

dialer3:~ # chkconfig vicidial
vicidial: unknown service

Vicibox.log:

SuSEfirewall2: batch committing...
SuSEfirewall2: Firewall rules unloaded.
Specified lock has been successfully added.
Time synchronized with 0.north-america.pool.ntp.org
Starting network time protocol daemon (NTPD)..done
Syntax OK
Starting httpd2 (prefork) ..done
Restarting service MySQL
Shutting down service MySQL ..done
Creating MySQL privilege database...
Installing MySQL system tables...
110110 13:15:15 [Warning] '--skip-locking' is deprecated and will be removed in a future release. Please use '--skip-external-locking' instead.
110110 13:15:15 [Warning] '--log_slow_queries' is deprecated and will be removed in a future release. Please use ''--slow_query_log'/'--slow_query_log_file'' instead.
OK
Filling help tables...
110110 13:15:15 [Warning] '--skip-locking' is deprecated and will be removed in a future release. Please use '--skip-external-locking' instead.
110110 13:15:15 [Warning] '--log_slow_queries' is deprecated and will be removed in a future release. Please use ''--slow_query_log'/'--slow_query_log_file'' instead.
OK

PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:

/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h 127.0.0.2
192.168.0.243 password 'new-password'

Alternatively you can run:
/usr/bin/mysql_secure_installation

which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.

See the manual for more instructions.

You can start the MySQL daemon with:
rcmysql start

You can test the MySQL daemon with mysql-test package

Please report any problems with the /usr/bin/mysqlbug script!

Starting service MySQL ..done
Syntax OK
Shutting down httpd2 (waiting for all children to terminate) ..done
Starting httpd2 (prefork) ..done
Syntax OK
Shutting down httpd2 (waiting for all children to terminate) ..done
Starting httpd2 (prefork) ..done
no command line options set
Downloading latest phone codes tables
/usr/bin/wget

mv: cannot stat `/usr/share/astguiclient/phone_codes_GMT-latest-220.txt': No such file or directory
mv: cannot stat `/usr/share/astguiclient/GMT_USA_zip-latest.txt': No such file or directory
--2011-01-10 13:15:58-- http://phonecodes.vicidial.com/phone_co ... st-220.txt
Resolving phonecodes.vicidial.com... 208.38.149.188
Connecting to phonecodes.vicidial.com|208.38.149.188|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 36775 (36K) [text/plain]
Saving to: `phone_codes_GMT-latest-220.txt'

0K .......... .......... .......... ..... 100% 10.2M=0.003s

2011-01-10 13:16:04 (10.2 MB/s) - `phone_codes_GMT-latest-220.txt' saved [36775/36775]

--2011-01-10 13:16:04-- http://phonecodes.vicidial.com/GMT_USA_zip-latest.txt
Resolving phonecodes.vicidial.com... 208.38.149.188
Connecting to phonecodes.vicidial.com|208.38.149.188|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 668146 (652K) [text/plain]
Saving to: `GMT_USA_zip-latest.txt'

0K .......... .......... .......... .......... .......... 7% 10.2M 0s
50K .......... .......... .......... .......... .......... 15% 11.4M 0s
100K .......... .......... .......... .......... .......... 22% 11.0M 0s
150K .......... .......... .......... .......... .......... 30% 11.4M 0s
200K .......... .......... .......... .......... .......... 38% 11.3M 0s
250K .......... .......... .......... .......... .......... 45% 11.1M 0s
300K .......... .......... .......... .......... .......... 53% 11.2M 0s
350K .......... .......... .......... .......... .......... 61% 11.4M 0s
400K .......... .......... .......... .......... .......... 68% 11.0M 0s
450K .......... .......... .......... .......... .......... 76% 11.4M 0s
500K .......... .......... .......... .......... .......... 84% 11.4M 0s
550K .......... .......... .......... .......... .......... 91% 10.7M 0s
600K .......... .......... .......... .......... .......... 99% 11.4M 0s
650K .. 100% 16.3M=0.06s

2011-01-10 13:16:05 (11.1 MB/s) - `GMT_USA_zip-latest.txt' saved [668146/668146]

100
200
300
400
500
600
700
800
900
1000
1053
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
6100
6200
6300
6400
6500
6600
6700
6800
6900
7000
7100
7200
7300
7400
7500
7600
7700
7800
7900
8000
8100
8200
8300
8400
8500
8600
8700
8800
8900
9000
9100
9200
9300
9400
9500
9600
9700
9800
9900
10000
10100
10200
10300
10400
10500
10600
10700
10800
10900
11000
11100
11200
11300
11400
11500
11600
11700
11800
11900
12000
12100
12200
12300
12400
12500
12600
12700
12800
12900
13000
13100
13200
13300
13400
13500
13600
13700
13800
13900
14000
14100
14200
14300
14400
14500
14600
14700
14800
14900
15000
15100
15200
15300
15400
15500
15600
15700
15800
15900
16000
16100
16200
16300
16400
16500
16600
16700
16800
16900
17000
17100
17200
17300
17400
17500
17600
17700
17800
17900
18000
18100
18200
18300
18400
18500
18600
18700
18800
18900
19000
19100
19200
19300
19400
19500
19600
19700
19800
19900
20000
20100
20200
20300
20400
20500
20600
20700
20800
20900
21000
21100
21200
21300
21400
21500
21600
21700
21800
21900
22000
22100
22200
22300
22400
22500
22600
22700
22800
22900
23000
23100
23200
23300
23400
23500
23600
23700
23800
23900
24000
24100
24200
24300
24400
24500
24600
24700
24800
24900
25000
25100
25200
25300
25400
25500
25600
25700
25800
25900
26000
26100
26200
26300
26400
26500
26600
26700
26800
26900
27000
27100
27200
27300
27400
27500
27600
27700
27800
27900
28000
28100
28200
28300
28400
28500
28600
28700
28800
28900
29000
29100
29200
29300
29400
29500
29600
29700
29800
29900
30000
30100
30200
30300
30400
30500
30600
30700
30800
30900
31000
31100
31200
31300
31400
31500
31600
31700
31800
31900
32000
32100
32200
32300
32400
32500
32600
32700
32800
32900
33000
33100
33200
33300
33400
33500
33600
33700
33800
33900
34000
34100
34200
34300
34400
34500
34600
34700
34800
34900
35000
35100
35200
35300
35400
35500
35600
35700
35800
35900
36000
36100
36200
36300
36400
36500
36600
36700
36800
36900
37000
37100
37200
37300
37400
37500
37600
37700
37800
37900
38000
38100
38200
38300
38400
38500
38600
38700
38800
38900
39000
39100
39200
39300
39400
39500
39600
39700
39800
39900
40000
40100
40200
40300
40400
40500
40600
40700
40800
40900
41000
41100
41200
41300
41400
41500
41600
41700
41750
--2011-01-10 13:16:07-- http://192.168.0.243/vicidial/audio_store.php
Connecting to 192.168.0.243:80... connected.
HTTP request sent, awaiting response... 401 Unauthorized
Authorization failed.
patching file Smarty/templates/DetailViewFields.tpl
patching file Smarty/templates/DetailViewUI.tpl
patching file include/js/dtlviewajax.js
patching file include/utils/ListViewUtils.php
patching file include/utils/UserInfoUtil.php
patching file Smarty/templates/DetailView.tpl
patching file include/js/general.js
patching file vtigerservice.php
patching file modules/Users/Authenticate.php
Audio Sync Settings not active, Exiting

Zypper.log

[/quote]2011-01-10 13:14:19 <1> dialer3(8157) [zypper] main.cc(main):75 ===== Hi, me zypper 1.4.8 built Nov 17 2010 00:41:06 =====
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] main.cc(main):76 ===== 'zypper' 'al' '-t' 'pattern' 'apparmor' =====
2011-01-10 13:14:19 <1> dialer3(8157) [zconfig] ZConfig.cc(_autodetectSystemArchitecture):59 Uname architecture is 'x86_64'
2011-01-10 13:14:19 <1> dialer3(8157) [zconfig] ZConfig.cc(_autodetectTextLocale):164 Default text locale is 'en'
2011-01-10 13:14:19 <1> dialer3(8157) [zconfig] ZConfig.cc(Impl):272 libzypp: 7.9.6 built Nov 17 2010 00:22:38
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] IniParser.cc(parse):69 Start parsing /etc/zypp/zypp.conf[g___]
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] IniParser.cc(parse):119 Done parsing /etc/zypp/zypp.conf[_eF_]
2011-01-10 13:14:19 <1> dialer3(8157) [Progress++] ProgressData.cc(report):86 {#1|/etc/zypp/zypp.conf}END
2011-01-10 13:14:19 <1> dialer3(8157) [zconfig] ZConfig.cc(Impl):475 ZConfig singleton created.
2011-01-10 13:14:19 <1> dialer3(8157) [zconfig] ZConfig.cc(ZConfig):566 libzypp: 7.9.6 built Nov 17 2010 00:22:38
2011-01-10 13:14:19 <1> dialer3(8157) [zconfig] ZConfig.cc(ZConfig):566 satsolver: 0.15.2
2011-01-10 13:14:19 <1> dialer3(8157) [zconfig] ZConfig.cc(ZConfig):566 zypp.conf: '/etc/zypp/zypp.conf'
2011-01-10 13:14:19 <1> dialer3(8157) [zconfig] ZConfig.cc(ZConfig):566 TextLocale: 'en' (en)
2011-01-10 13:14:19 <1> dialer3(8157) [zconfig] ZConfig.cc(ZConfig):566 SystemArchitecture: 'x86_64' (x86_64)
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Zypper.cc(Zypper):76 Zypper instance created.
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] media.h(MediaCallbacks):237 Set media callbacks..
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Zypper.cc(processGlobalOptions):316 START
2011-01-10 13:14:19 <5> dialer3(8157) [Measure] Measure.cc(Impl):145 START MEASURE(ReadConfig)
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Augeas.cc(Augeas):21 Going to read zypper config using Augeas...
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Augeas.cc(Augeas):106 Done reading conf files:
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Augeas.cc(Augeas):111 user conf read: no
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Augeas.cc(Augeas):112 global conf read: yes
2011-01-10 13:14:19 <5> dialer3(8157) [Measure] Measure.cc(elapsed):167 ELAPSED(ReadConfig) 0 (u 0.01 s 0.00 c 0.00)
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/main/*/showAlias = false
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/main/1/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/solver/*/installRecommends = yes
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/solver/2/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/solver/*/forceResolutionCommands = remove
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/solver/3/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/useColors = never
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/4/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/background = dark
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/5/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/result = white
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/6/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/msgStatus = grey
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/7/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/msgError = red
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/8/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/msgWarning = yellow
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/9/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/positive = green
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/10/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/negative = red
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/11/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/highlight = lightcyan
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/12/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/color/*/promptOption = grey
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/color/13/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/obs/*/baseUrl = http://download.opensuse.org/repositories/
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/obs/14/commented: true
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(get):148 Got /files/etc/zypp/zypper.conf/obs/*/platform = openSUSE_11.3
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Augeas.cc(isCommented):220 /files/etc/zypp/zypper.conf/obs/15/commented: true
2011-01-10 13:14:19 <5> dialer3(8157) [Measure] Measure.cc(~Impl):153 MEASURE(ReadConfig) 0 (u 0.01 s 0.00 c 0.00) [0 (u 0.00 s 0.00 c 0.00)]
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Zypper.cc(processGlobalOptions):420 Verbosity 1
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Zypper.cc(processGlobalOptions):421 Output type 1
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Zypper.cc(processGlobalOptions):528 repos.d dir = /etc/zypp/repos.d
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Zypper.cc(processGlobalOptions):529 cache dir = /var/cache/zypp
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Zypper.cc(processGlobalOptions):530 raw cache dir = /var/cache/zypp/raw
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Zypper.cc(processGlobalOptions):531 solv cache dir = /var/cache/zypp/solv
2011-01-10 13:14:19 <1> dialer3(8157) [zypper++] Zypper.cc(processGlobalOptions):532 package cache dir = /var/cache/zypp/packages
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Zypper.cc(processGlobalOptions):544 Repositories enabled
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Zypper.cc(processGlobalOptions):716 DONE
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Zypper.cc(processCommandOptions):870 START
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Zypper.cc(processCommandOptions):2445 Done parsing options.
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Zypper.cc(processCommandOptions):2464 Done
2011-01-10 13:14:19 <1> dialer3(8157) [zypp++] ZYppFactory.cc(lockFileExists):163 /var/run/zypp.pid{does not exist}
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppFactory.cc(zyppLocked):283 no lockfile /var/run/zypp.pid found
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppFactory.cc(zyppLocked):286 running as root. Will attempt to create /var/run/zypp.pid
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppFactory.cc(exLockFile):145 locked (exclusive)
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppFactory.cc(unLockFile):156 unlocked
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppFactory.cc(createLockFile):175 written lockfile with pid 8157
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppFactory.cc(shLockFile):134 locked (shared)
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppImpl.cc(ZYppImpl):45 libzypp: 7.9.6 built Nov 17 2010 00:22:38
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppImpl.cc(ZYppImpl):45 satsolver: 0.15.2
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppImpl.cc(ZYppImpl):45 zypp.conf: '/etc/zypp/zypp.conf'
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppImpl.cc(ZYppImpl):45 TextLocale: 'en' (en)
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppImpl.cc(ZYppImpl):45 SystemArchitecture: 'x86_64' (x86_64)
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppImpl.cc(ZYppImpl):46 Initializing keyring...
2011-01-10 13:14:19 <1> dialer3(8157) [zypp::KeyRing] KeyRing.cc(Impl):93 Current KeyRing::DefaultAccept: 0000000000
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Zypper.cc(doCommand):2554 Going to process command 60
2011-01-10 13:14:19 <1> dialer3(8157) [locks] Locks.cc(read):124 read locks from /etc/zypp/locks
2011-01-10 13:14:19 <1> dialer3(8157) [locks] Locks.cc(read):130 file not exist(or cannot be stat), no lock added.
2011-01-10 13:14:19 <1> dialer3(8157) [locks] Locks.cc(addLock):143 add new lock
2011-01-10 13:14:19 <1> dialer3(8157) [locks++] Locks.cc(addLock):158 query added as new
2011-01-10 13:14:19 <1> dialer3(8157) [locks] Locks.cc(mergeList):393 merging list old: 0 to add: 1to remove: 0
2011-01-10 13:14:19 <1> dialer3(8157) [locks++] Locks.cc(save):456 writed 1locks
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Zypper.cc(cleanup):4557 START
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] main.cc(~Bye):60 ===== Exiting main() =====
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] PathInfo.cc(recursive_rmdir):429 recursive_rmdir /var/tmp/zypp.BjwP2o
2011-01-10 13:14:19 <1> dialer3(8157) [zypp++] TmpPath.cc(~Impl):78 TmpPath cleaned up /var/tmp/zypp.BjwP2o{d 0700 0/0}
2011-01-10 13:14:19 <1> dialer3(8157) [zypper] Zypper.cc(~Zypper):83 Zypper instance destroyed. Bye!
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] PathInfo.cc(recursive_rmdir):429 recursive_rmdir /var/tmp/TmpDir.GSG9Dz
2011-01-10 13:14:19 <1> dialer3(8157) [zypp++] TmpPath.cc(~Impl):78 TmpPath cleaned up /var/tmp/TmpDir.GSG9Dz{d 0700 0/0}
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppFactory.cc(unLockFile):156 unlocked
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppFactory.cc(~ZYppGlobalLock):88 Cleaning lock file. (8157)
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] PathInfo.cc(unlink):670 unlink /var/run/zypp.pid
2011-01-10 13:14:19 <1> dialer3(8157) [zypp] ZYppFactory.cc(~ZYppGlobalLock):90 Lockfile cleaned. (8157)[/quote]

I am doing absolutely nothing "funny". I have done a straight forward installation and used all the default setting as is.

Update OS - N
Turn off firewall - Y
Use SVN Trunk - Y
Database server - Y
Web Server - Y
Telephony Server - Y
Additional Server - N
VTiger - Y
Sangoma Card - Y

I have installed Vicibox on this server many times with the same Sangoma card and nothing has changed since the previous installations.

by **williamconley** » Mon Jan 10, 2011 10:41 am

as a test you should try it without the sangoma card "Y" during installation. at least that could narrow it down ...

by **Trying** » Mon Jan 10, 2011 11:52 am

Will do.

by **Michael_N** » Mon Jan 10, 2011 12:56 pm

i have the same problem as you

fresh install with vicibox 3.1.3
single server
no card

by **Trying** » Mon Jan 10, 2011 1:40 pm

Thank you!

Every time I think I am the only one when I experience these weird and wonderful problems!

What do you get when you enter chkconfig vicidial ?

by **Michael_N** » Mon Jan 10, 2011 3:59 pm

Trying wrote:Thank you! Every time I think I am the only one when I experience these weird and wonderful problems!

What do you get when you enter chkconfig vicidial ?

unknown service

by **williamconley** » Mon Jan 10, 2011 6:33 pm

Trying wrote:Thank you! Every time I think I am the only one when I experience these weird and wonderful problems!

What do you get when you enter chkconfig vicidial ?

Code: Select all: vici:~ # chkconfig vicidial vicidial on

by **Trying** » Mon Jan 10, 2011 11:18 pm

Vicidial was only on in the 32bit install, not the 64bit install. Michael_N, are you also using the 64bit?

by **Michael_N** » Mon Jan 10, 2011 11:31 pm

yes i use 64bit install

by **Kumba** » Tue Jan 11, 2011 1:54 am

Please follow this thread and try what applies:

http://www.vicidial.org/VICIDIALforum/v ... hp?t=15336

by **Trying** » Tue Jan 11, 2011 2:32 am

Hi Kumba

Thank you. A reboot now results in:

chkconfig vicidial
vicidial off

How do you manually start Vicidial? Also, it still doesn't see the Sangoma card. Michael, are you having any luck?

by **Michael_N** » Tue Jan 11, 2011 2:37 am

i did vicibox-install after the patch

and after a reboot it worked

by **Trying** » Tue Jan 11, 2011 2:44 am

Hmmm, ok that worked to get Vicidial up. Still doesn't see my card though.

by **Trying** » Tue Jan 11, 2011 3:15 am

In both the 32 and 64 bit versions:

wanrouter hwprobe

wanrouter: Wanpipe Module: /lib/modules/2.6.34.7-0.7-default/kernel/drivers/net/wan/sdladrv not found !!!!
WANPIPE drivers must be compiled as modules
Check kernel configuration in /usr/src/linux/.config:
CONFIG_WAN_ROUTER=m
CONFIG_VENDOR_SANGOMA=m

BUT:

ln -s /lib/modules/`uname -r`/weak-updates/extra/sdladrv.ko /lib/modules/`uname -r`/kernel/drivers/net/wan/sdladrv.ko
ln: creating symbolic link `/lib/modules/2.6.34.7-0.7-pae/kernel/drivers/net/wan/sdladrv.ko': File exists

by **Kumba** » Tue Jan 11, 2011 4:08 am

I don't know how you ended up with a PAE kernel installed on a 64-bit install. Whatever you did to end up with that it was wrong.

Download v.3.1.4 and try again. You do not need to run any of the other sticky's on this version unless there is one posted specifically for your version.

by **DarknessBBB** » Tue Jan 11, 2011 4:22 am

Michael_N wrote:i did vicibox-install after the patch

and after a reboot it worked

I still cannon see dahdi_dummy (no hardware here) in asterisk. what vicibox-install overwrites if I execute it?

by **Kumba** » Tue Jan 11, 2011 4:24 am

You won't see Dahdi Dummy anymore. Starting with DAHDI v.2.4.0+, the "dummy" module has been moved into the DAHDI core. It's now used as a back-up timing source if no other appropriate source can be found. The end result is that there is no dummy module to load anymore.

If you run "dahdi_test" and get valid results, you are good to go.

by **DarknessBBB** » Tue Jan 11, 2011 4:27 am

Kumba wrote:You won't see Dahdi Dummy anymore. Starting with DAHDI v.2.4.0+, the "dummy" module has been moved into the DAHDI core. It's now used as a back-up timing source if no other appropriate source can be found. The end result is that there is no dummy module to load anymore.

If you run "dahdi_test" and get valid results, you are good to go.

Thanks Kumba

vicidial.org

Sangoma Card Not Found + Asterisk not started

Sangoma Card Not Found + Asterisk not started

Who is online