vicidial.org

by **gmcust3** » Tue Jan 18, 2011 10:24 am

I have Never done any domestic Setup.

You can also say that None of my client showed interest in the same.

Now, I got one client interested in the same.

I am planning for below details : 30 agents ,1:1 Ratio, Full Recording,Outbnd

Core2Quad Process or HP server
8 GB Ram
1 TB HDD
Single Slot PRI Card

Is it Ok ?

If Ok , then Any step by step Document for PRI integration with Vici ?

by **striker** » Tue Jan 18, 2011 12:53 pm

hi

i am also using the same server for 25 agents, with recording outbound
i have used all vicidial so that all my 30 channels ieE1 will be used simultaneously

step to use E1 or T1 cards in vicidial

for digium cards
1. once card inserted type the following
2. dahdi_genconf -vvvv (this will automatically detect the card model and load the respective driver and conf files
3. type dahdi_cfg -vvv "this should show the configured channels

3.vi /etc/asterisk/dahdi-channels.conf and change the context to trunkinbound

4.vi /etc/modprobe.d/dahdi.blacklist.conf , comment the respective driver of your card

5. vi /etc/asterisk/extension.conf
edit the trunkinound context dialplan as per your inbound DID
edit the GLOBALS context datas as per below
#TRUNK=Zap/r1 ; Trunk interface
#TRUNKX=Zap/r2 ; 2nd trunk interface
TRUNK=DAHDI/g0
TRUNKX=DAHDI/g0

6. in default context write the outbound dialplan as
exten => _X.,2,Dial(${TRUNKX}/${EXTEN:4},30,tTor)

by **gmcust3** » Tue Jan 18, 2011 2:10 pm

Anyway to use PRI line but without using PRI cards.

I heard about GSM PRI card or something like that.

I am looking for CHEAPEST solution for domestic setup.

Code: Select all: 5. vi /etc/asterisk/extension.conf edit the trunkinound context dialplan as per your inbound DID edit the GLOBALS context datas as per below #TRUNK=Zap/r1 ; Trunk interface #TRUNKX=Zap/r2 ; 2nd trunk interface TRUNK=DAHDI/g0 TRUNKX=DAHDI/g0 6. in default context write the outbound dialplan as exten => _X.,2,Dial(${TRUNKX}/${EXTEN:4},30,tTor)

I use CARRIER settings of GoAutoDial.

by **striker** » Tue Jan 18, 2011 11:13 pm

pri Gateway is the alternative to pri cards, but the gateway is somewat costlier than pri card

there are lots of cheap cards like openvox , rhino , zycoo etc

if you use gateway then no need to edit diaplans,dahdi conffiles ,
just you need to create sip trunking,

no idea about gsm cards

by **gmcust3** » Tue Jan 18, 2011 11:17 pm

openvox , rhino , zycoo : PRI Gateway or PRI cards ?

by **striker** » Tue Jan 18, 2011 11:20 pm

pri cards

by **gmcust3** » Tue Jan 18, 2011 11:36 pm

I tried for Sangoma and Digium and Both costs around 600$ for single slot.

by **ramindia** » Thu Jan 20, 2011 11:05 pm

try atcom

still cheaper

by **gmcust3** » Thu Jan 20, 2011 11:14 pm

How much it costs ? approx ?

by **ramindia** » Fri Jan 21, 2011 9:56 pm

less than the digium or any others

by **gardo** » Sat Jan 22, 2011 2:32 pm

Go for Sangoma cards. Their quality is topnotch. More expensive but less headaches for you in the long run. GoAutoDial has out of the box support for Sangoma cards.

by **gmcust3** » Sat Jan 22, 2011 9:54 pm

Sangoma costs 700$ for a single Slot whereas ATCOM cost 180$ for single slot and 350$ for 4 slot and comes with 2 years of warranty.

by **williamconley** » Sun Jan 23, 2011 10:32 am

does ATCOM ... work?

by **gmcust3** » Sun Jan 23, 2011 12:02 pm

You can try http://atcom.cn/downloads/

by **williamconley** » Sun Jan 23, 2011 12:32 pm

right ... but does anyone have one installed and working ...? (cheap is nice, but if it doesn't work ...)

by **gmcust3** » Sun Jan 23, 2011 10:07 pm

Someone here only suggested me this name.

by **williamconley** » Mon Jan 24, 2011 7:53 am

bummer. i was hoping someone who has used it would pop on and say "yep! I'm using one right now!"

by **gmcust3** » Mon Jan 24, 2011 8:23 am

I see ramindia suggested me this.

vicidial.org

Domestic 30 seats , Ramp upto 150 seats

Domestic 30 seats , Ramp upto 150 seats

domestic callcenter

pri gateway

pri cards

Who is online