(COMPLETE) New Installation (UK - PRI) - Poke around

This is the forum used by people to post job openings or requests for quotes or consultations

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

(COMPLETE) New Installation (UK - PRI) - Poke around

Postby leseul » Mon Mar 07, 2011 6:04 am

Hi All,

Would it be possible for someone familiar with UK based PRI system setups to give me a nudge?

I have limited experience but would involve logging in and having a butchers at the setup prior to going live to check my settings and to make sure things won't go bang. Especially with the Sangoma card with which my experience is extremely limited.

It's mostly to do with configuring the ISDN30 interface as I've read the manual and am confident with pretty much everything else.

Don't know if this helps but:
Vicibox.Redux.x86_64-3.1.9.150 from .iso | Vicidial 2.4-299 Build 110214-0001 | Asterisk 1.4.39.1-vici | Single Server | Sangoma A102DE | No Extra Software After Installation.

Thanks in advance.

Edit: Updated Subject to make it more obvious what's needed
Last edited by leseul on Mon Jun 06, 2011 10:00 am, edited 2 times in total.
leseul
 
Posts: 54
Joined: Fri Mar 04, 2011 8:10 am

Postby williamconley » Mon Mar 07, 2011 12:26 pm

thanks for posting your specs, you may want to have another look at the bottom left corner of an admin screen to get the correct version/build.

more like this:

Code: Select all
VERSION: 2.4-290
BUILD: 101127-2232


There have been a few discussions regarding UK T1/PRI/E1 setups. If you search with a few different engines you are likely to come up with a thread or two.

Also: if you were more specific as to what problem(s) you are experiencing ...
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20253
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Postby leseul » Tue Mar 08, 2011 5:14 am

you may want to have another look at the bottom left corner of an admin screen to get the correct version/build.


Oops, sorry about that, have corrected it in the original post.

There have been a few discussions regarding UK T1/PRI/E1 setups. If you search with a few different engines you are likely to come up with a thread or two.

Also: if you were more specific as to what problem(s) you are experiencing ...


Thanks, I've already been a lurker for a while prior to registering and trying to do my research.

The only problem I have is actually configuring the Sangoma hardware and applying that to the dial plan to actually place calls as I have no experience in this area - I've done my research and I think I'm almost there, but there really no substitute for having a professional have a poke around and point out any mistakes before going live.

After all, a little knowledge is a dangerous thing.
leseul
 
Posts: 54
Joined: Fri Mar 04, 2011 8:10 am

Postby leseul » Mon Jun 06, 2011 10:00 am

Argh - I've left topics open all oer the place.

Thanks to everyone who got in touch with me about this and provided advice to get started.
Vicibox.Redux.x86_64-3.1.9.150 from .iso | Vicidial 2.6b0.5 SVN 1940 | Admin Version 2.6-395a Build: 130221-1736 | Servers 1,2-Asterisk 1.4.39.1-vici, 3-Asterisk 1.4.44-vici | 1x DB, 3x Asterisk/Web | Sangoma A102DE x5 | Upgraded After Installation.
leseul
 
Posts: 54
Joined: Fri Mar 04, 2011 8:10 am


Return to Jobs - Requests for Consultation

Who is online

Users browsing this forum: No registered users and 35 guests