pas LIVE CALL on the sreen

[tmkconcept]

I sip a new account and I did the same configuration on carrier
Here is part of IAPA

[impact1]
type = peer
username = goog
secret = XXXX
host = 193.X.X.X
nat = no
dtmfmode = rfc2833
outboundproxy = 193.1X.X.X
port = 5060
fromdomain = 193.X.X.X
canreinvite = No
qualify = no
disallow = all
allow = ulaw
allow = alaw
allow = G729
insecure = port, invite

concerning the extension I put this

exten => _00XX [1-5789] XXXXXXXX, 1, AGI (AGI: / / 127.0.0.1:4577 / call_log)
exten => _00XX [1-5789] XXXXXXXX, 2, Dial (SIP/impact1 / $ {EXTEN},, Ttor)
exten => _00XX [1-5789] XXXXXXXX, 3, Hangup


on my screen asterik i have

WARNING [24633]: file.c: 1273 waitstream_core: Unexpected control subclass '-1'
[Apr 29 10:46:32] - Executing [8368 @ default: 2] AGI ("@ default Local/0033232528815-8c15, 1", "acted: / / 127.0.0.1:4577 / call_log") in new stack


Following an answer and

DeadAGI ("@ default Local/0033232528815-8c15, 2", "acted: / / 127.0.0.1:4577 / call_log - HVcauses - PRI ----- ----- 16 ----- ANSWER NODEBUG ----- 7 ----- 3 ") in new stack
[Apr 29 10:46:35] - AGI Script done: / / 127.0.0.1:4577 / call_log - HVcauses - PRI ----- ----- 16 ----- ANSWER NODEBUG - Completed --- 7 ----- 3, Returning 0
[Apr 29 10:46:35] == Spawn extension (default, 0033232528815, 2) exited non-zero on 'Local/0033232528815 @ default-8c15, 2'

but the interface VICIDIAL not LIVE CALL

VERSION: 2.4-250
BUILD: 100420-1010
Asterisk 1.4.26.2
Softphone: eyeBeam
Codec: G729; G711(ulaw and alaw)

Thank you

[williamconley]

when you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.

this IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system.

Similar to This:
Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation
___________

You showed the asterisk cli after it was all over. But you didn't show the cli from when a problem may have occurred. My forensics are good but not that good. Did your agent hear "you are the only person in this conference"? Did your agent press resume? Was this a manual call or an autodial?