strange issue in installation of x100p

[asterisk_at_my_risk]

hello

we are trying to install x100p card in fedora core 6 but afer the installation system is getting restarted after the message comes

"starting udev"

system goes for a restart

my asterisk version is 1.2.14

i wonder where exactly is the issue
is it with the card , OS, kernel version or some wrong installation step

my current kernel version is 2.6.18.4


please give some hint on this

[mflorell]

I haven't used FC6, but I would recommend trying an older kernel, something like 2.6.17.11 I have found is very stable.

[ramindia]

Hi


X100p installed with FC5 works great

ram

[asterisk_at_my_risk]

hello

as per your suggestion i have used kernel 2.6.17.11 but the issue is same

the steps i am follwing are

1)inserted the card into the server having fedora core 6
2)then we compiled 2.6.17.11 as per scratch install
3)-
cd ./zaptel-1.2.12
- make clean
- make linux26
- make install
- cd ../libpri-1.2.4
- make clean
- make
- make install
cd../asterisk-1.2.14
make clean
make
make install

4) then we installed the driver of x100p card in zaptel directory
5)then we did modprobe zaptel,modprobe wcfxo

6)after this configuration of the card in etc/zaptel.conf and /etc/asterisk/zapta.conf

please can someone let us know whether the steps we are doing are right or wrong do we have to do something else

thanks in advance

[ramindia]

Hi

after 3rd step you should able to see the X100p driver installed already

i dont think this step required again

4) then we installed the driver of x100p card in zaptel directory


you can observer when you compiling Zaptel , you can see the card detection.

or you want to check the card installed or not , you can use zttool to test .

ram

[asterisk_at_my_risk]

hello RAM INIDIA

firstly well thanks for your reply we are struck here

now i am trying to do on FC4

we have installed the card and followed the steps you recommended
but know the issue is as i do modprobe wcfxo my server restart
it comes up again

i have treid all the option here

i can not say that the card is wrong because this card is working fine on
other system

the server is also showing the card when i do the lspci

please help me on this









please help me on this

[ramindia]

Hi

for your info, my running server shows as follows

lspci

00:0d.0 Communication controller: Motorola Unknown device 5608


my rc.local

modprobe zaptel
modprobe wcfxo
/sbin/ztcfg -vvvvvvvvvvvv


zap show status
Description Alarms IRQ bpviol CRC4
Wildcard X100P Board 1 RED 0 0 0

iam using asterisk/zaptel/libpri from SVN

what is the output of ztttool, did you able to see the card for testing ?

ram

[asterisk_at_my_risk]

hello

after lot of resarch and searching i came to know that there are some incompatibilities between Moterboards and X100p card can any one let me know
that what Intel server Mother boards are they running succesfuly with x100p
it will be a great help to me to have model of these boards

Thanks

[mflorell]

I have run the X100P as a timer on 3 different Asus Motherboards with P4-family processors in them. I would assume that all Asus boards would work.

[asterisk_at_my_risk]

hello
matt can you give me the model no of ASUS board on which x100p
works fine

and i am using x100p from digitnetwork

or anyone who have used intel server board sucessfuly with x100p
can give us the model no of any such board

[mflorell]

I don't know the model numbers any more because they are all remote and in production. They were newer consumer-level Asus motherboards purchased in the last 6 months.