Problem with calls -Everyone is busy/congested at this time

[manasbhattacharya007]

Hi all, I have installed the vicidialnow and tried out Goautodialnow and The vicibox as well but non of them seems to be working for me .


Every time i installed the vicibox redux 3 i could not log in to admin as the default admin name which is 6666 and pass 1234 never worked for me.

And every time i installed the vicidialnow or go autodial the i have a problem of some kind of conjesion which i could never find out why it is.

I would be very greatful if anyone helps me regardsing that. I am posting the asterisk cli underneath. Please help me it is the outcome of the vicidialnow 1.3. Please help me resolve it.


-- Executing MeetMe("Local/8600051@default-05d0,2", "8600051|F") in new stack
> Channel Local/8600051@default-05d0,1 was answered.
-- Executing AGI("Local/8600051@default-05d0,1", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing Dial("Local/8600051@default-05d0,1", "SIP/skylark/8312121465|60|tTo") in new stack
-- Called skylark/8312121465
-- SIP/skylark-08b1eff0 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing Hangup("Local/8600051@default-05d0,1", "") in new stack
== Spawn extension (default, 918312121465, 3) exited non-zero on 'Local/8600051@default-05d0,1'
-- Executing DeadAGI("Local/8600051@default-05d0,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----1-----CONGESTION----------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
== Spawn extension (default, 8600051, 1) exited non-zero on 'Local/8600051@default-05d0,2'
-- Executing DeadAGI("Local/8600051@default-05d0,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0

Please help me why this is happening to me...

[Op3r]

Check sip show debug.

[williamconley]

-- Called skylark/8312121465
-- SIP/skylark-08b1eff0 is circuit-busy

Concur.

Show what happens between these two moments.

You may also show your carrier configuration.

also:

when you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.

this IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

[manasbhattacharya007]

Dear friend trheres is nothing between the logs you have asked for. I have installed the vicidialnow version VICIDIALNOW CE 1.3.

AND THERE IS NO SUCH COMMAND CALLED SIP SHOW DEBUG...

THE CLI IS...

Connected to Asterisk 1.2.30.2 currently running on vici (pid = 2639)
Verbosity is at least 21
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
> Channel SIP/cc100-08349258 was answered.
-- Executing MeetMe("SIP/cc100-08349258", "8600051|F") in new stack
== Parsing '/etc/asterisk/meetme.conf': Found
-- Created MeetMe conference 1023 for conference '8600051'
-- Playing 'conf-onlyperson' (language 'en')
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing MeetMe("Local/8600051@default-47a1,2", "8600051|F") in new stack
> Channel Local/8600051@default-47a1,1 was answered.
-- Executing AGI("Local/8600051@default-47a1,1", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing Dial("Local/8600051@default-47a1,1", "SIP/pynkglobal/8594965055|60|tTo") in new stack
-- Called pynkglobal/8594965055
-- SIP/pynkglobal-0836e8d0 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing Hangup("Local/8600051@default-47a1,1", "") in new stack
== Spawn extension (default, 918594965055, 3) exited non-zero on 'Local/8600051@default-47a1,1'
-- Executing DeadAGI("Local/8600051@default-47a1,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----1-----CONGESTION----------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
== Spawn extension (default, 8600051, 1) exited non-zero on 'Local/8600051@default-47a1,2'
-- Executing DeadAGI("Local/8600051@default-47a1,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... EBUG-----0

PLEASE NOTE THAT THE ASTERRISK VERSION IS 1.2

[williamconley]

Code: Select all

sip debug