Enabling List Mix

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Enabling List Mix

Postby MarketResearch » Thu Jun 21, 2012 3:45 pm

How is it that lix mix is enabled?
The Manual does not state how to actually enable List Mix. I've done some searching on Google to no avail. Can anyone please provide instruction on how to go about enabling this feature?
Thanks in advance
MarketResearch
 
Posts: 9
Joined: Thu Jun 21, 2012 3:00 pm

Re: Enabling List Mix

Postby mflorell » Fri Jun 22, 2012 6:06 am

You enable it in the campaign detail screen, by selecting a list mix that you have created and activated.
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Enabling List Mix

Postby MarketResearch » Fri Jun 22, 2012 10:07 am

According to the manual, list mix is disabled by default and needs to be activated on the server.

"List Mix - Overrides the Lead Order and Dial Status fields. Will use the List and status parameters for
the selected List Mix entry in the List Mix sub section instead. Default is DISABLED. By Default, List
Mix is disabled and will not function until your administrator activates List Mix functionality on the
server."

I was wondering how to activate this functionality on the server?
MarketResearch
 
Posts: 9
Joined: Thu Jun 21, 2012 3:00 pm

Re: Enabling List Mix

Postby MarketResearch » Mon Jun 25, 2012 9:20 am

Any ideas?
MarketResearch
 
Posts: 9
Joined: Thu Jun 21, 2012 3:00 pm

Re: Enabling List Mix

Postby mflorell » Mon Jun 25, 2012 10:00 am

It is enabled by default on newer versions of the code, nothing the administrator needs to do to activate it.
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Enabling List Mix

Postby MarketResearch » Thu Jun 28, 2012 11:29 am

We are using the ViciBox_Redux.i686-3.1.15.preload.iso. How would we go about enabling it using this setup? It is not enabled by default here.
MarketResearch
 
Posts: 9
Joined: Thu Jun 21, 2012 3:00 pm

Re: Enabling List Mix

Postby mflorell » Thu Jun 28, 2012 11:43 am

in admin.php:
- click "Campaigns"
- click "List Mix"
- click "MODIFY LIST MIX" for the campaign you want to enable list mix on
- enter the ID and name, select the list to start with and click SUBMIT
- click "SET TO ACTIVE" link
- add up to 40 new entries for the list mix that you created, making sure that the "Difference %" adds up to 0, then click "Submit"
- click on "Detail" at the top of this screen, to go to the Campaign Detail Modification page for this campaign
- set "List Mix" to the list mix that you just created, then click submit on that form

There you go, you have now created a list mix and activated it for your campaign. You now have total control over the lists, statuses, order and percentage mix of how the leads are dialed in the campaign. But be aware that List Mix will do exactly what you tell it to, and nothing more. If your lists need to be reset, it will not warn you. If you run out of a specific status, it will not warn you. If your hopper level is set to 100 and the hopper runs and you are not paying attention to your lists, it is entirely possible that only 2 leads will be loaded to dial once a minute because you haven't reset your lists or you don't have enough leads of a specific status in a specific list to fill the list mix you have set.
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida


Return to Support

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 121 guests