unable to send or receive calls

[dajaz27]

Goautodial ce 2.1 iso install
centos
I have the manager manual
followed tutorials. I am still not sure what is wrong other than maybe "SIP/18135627155@goautodial||tTo") . Any Ideas?





[Aug 19 06:07:07] == Manager 'sendcron' logged on from 127.0.0.1
[Aug 19 06:07:07] == Manager 'sendcron' logged off from 127.0.0.1
[Aug 19 06:07:47] WARNING[3018]: acl.c:541 ast_ouraddrfor: Cannot connect
[Aug 19 06:07:47] WARNING[3018]: chan_sip.c:1894 __sip_xmit: sip_xmit of 0xb6c96 954 (len 457) to 208.93.224.230:5060 returned -2: Network is unreachable
[Aug 19 06:07:47] NOTICE[3018]: chan_sip.c:15566 handle_request_invite: Call fro m '' to extension '8775189339' rejected because extension not found.
[Aug 19 06:07:49] WARNING[3018]: acl.c:541 ast_ouraddrfor: Cannot connect
[Aug 19 06:07:49] WARNING[3018]: chan_sip.c:1894 __sip_xmit: sip_xmit of 0xb6c96 35c (len 457) to 208.93.227.214:5060 returned -2: Network is unreachable
[Aug 19 06:07:49] NOTICE[3018]: chan_sip.c:15566 handle_request_invite: Call fro m '' to extension '8775189339' rejected because extension not found.
[Aug 19 06:08:02] == Parsing '/etc/asterisk/manager.conf': [Aug 19 06:08:02] Found
[Aug 19 06:08:02] == Manager 'sendcron' logged on from 127.0.0.1
[Aug 19 06:08:02] == Parsing '/etc/asterisk/manager.conf': [Aug 19 06:08:02] Found
[Aug 19 06:08:02] == Manager 'sendcron' logged on from 127.0.0.1
[Aug 19 06:08:02] == Manager 'sendcron' logged off from 127.0.0.1
[Aug 19 06:08:04] == Manager 'sendcron' logged off from 127.0.0.1
[Aug 19 06:08:07] == Parsing '/etc/asterisk/manager.conf': [Aug 19 06:08:07] Found
[Aug 19 06:08:07] == Manager 'sendcron' logged on from 127.0.0.1
[Aug 19 06:08:07] == Manager 'sendcron' logged off from 127.0.0.1
go*CLI> 04:06:17] VERBOSE[30426] logger.c: [Aug 19 04:06:17] -- Executing [918135627155@default:1] AGI("SIP/8001-00000001", "agi://127.0.0.1:4577/call_log") in new stack
No such command '04:06:17] VERBOSE[30426] logger.c: [Aug 19 04:06:17] -- Executing [918135627155@default:1] AGI("SIP/8001-00000001", "agi://127.0.0.1:4577/call_log") in new stack' (type 'help 04:06:17] VERBOSE[30426]' for other possible commands)
go*CLI> [Aug 19 04:06:17] VERBOSE[30426] logger.c: [Aug 19 04:06:17] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
No such command '[Aug 19 04:06:17] VERBOSE[30426] logger.c: [Aug 19 04:06:17] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0' (type 'help [Aug 19' for other possible commands)
go*CLI> [Aug 19 04:06:17] VERBOSE[30426] logger.c: [Aug 19 04:06:17] -- Executing [918135627155@default:2] Dial("SIP/8001-00000001", "SIP/18135627155@goautodial||tTo") in new stack
No such command '[Aug 19 04:06:17] VERBOSE[30426] logger.c: [Aug 19 04:06:17] -- Executing [918135627155@default:2] Dial("SIP/8001-00000001", "SIP/18135627155@goautodial||tTo") in new stack' (type 'help [Aug 19' for other possible commands)
go*CLI> [Aug 19 04:06:17] WARNING[30426] chan_sip.c: No such host: goautodial
No such command '[Aug 19 04:06:17] WARNING[30426] chan_sip.c: No such host: goautodial' (type 'help [Aug 19' for other possible commands)

[williamconley]

show carrier setup, including account entry globals string and dialplan entry

[villbonzload]

your the third person asking this including me...Pls, anyone could you help us..

[villbonzload]

Hello there, I'm hoping that you can help me with my situation right now. I have no problem contacting other extension no. My problem is I can't contact the local telephone or mobile phone(The message I pasted it below). As you can see it the extension already registered in the server as will as the sip trunk. I'm using vicibox 3.1.15 64 .What would be the possible cause of this? Hoping those of you who already solved this kind of problem can comment a little.Thank You

[b][Sep 4 19:47:45] NOTICE[18784]: chan_sip.c:15566 handle_request_invite: Call from 'gs102' to extension '00639166962508' rejected because extension not found.

[size=150]gs102/gs102 192.168.254.7 D N 14732 OK (102 ms)
callcentric/17772672xxx 204.11.192.23 N 5080 OK (323 ms)

[williamconley]

your the third person asking this including me...Pls, anyone could you help us..

Perhaps you could have read the response, where the request to show the carrier setup was. I note that not only did he not post his carrier setup, but you did not either. Probably not going to work out if you don't give us any information to fix your problem. My opinion.

Hello there, I'm hoping that you can help me with my situation right now. I have no problem contacting other extension no. My problem is I can't contact the local telephone or mobile phone(The message I pasted it below). As you can see it the extension already registered in the server as will as the sip trunk. I'm using vicibox 3.1.15 64 .What would be the possible cause of this? Hoping those of you who already solved this kind of problem can comment a little.Thank You

[b][Sep 4 19:47:45] NOTICE[18784]: chan_sip.c:15566 handle_request_invite: Call from 'gs102' to extension '00639166962508' rejected because extension not found.

[size=150]gs102/gs102 192.168.254.7 D N 14732 OK (102 ms)
callcentric/17772672xxx 204.11.192.23 N 5080 OK (323 ms)

And now I note that your problem is NOT the same as his was. You have a different error message. You should have created your own post/thread.

Also:

when you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.

this IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

that being said: your error is that this extension is not found. Since you have not posted your carrier setup, I cannot tell if this dial pattern is valid in your system or not: "00639166962508"

[villbonzload]

sorry I'm looking for new post button but didn't found it.

[williamconley]

LOL:

viewforum.php?f=4

then click on "new topic".

[despitia]

Hello,

I resolved this issue by reviewing the trunk receiving the call