Goautodial problems

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

Goautodial problems

Postby bbakirtas » Thu Dec 06, 2012 3:41 am

hi i'm from Turkey
i download goautodial 2.1
my server ip 192.168.2.25 and have internet
i have connect with my provider i can call using eyebeam (manual)
my problem autodial not calling :D

Code: Select all
[goautodial]
disallow=all
allow=ulaw
allow=alaw
type=friend
username=username
secret=mysecret
host=81.2.129.198
dtmfmode=rfc2833
fromhost=81.2.129.198
fromuser=username
qualify=yes
insecure=port
canreinvite=yes
nat=yes


Code: Select all
exten => _X.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _X.,2,Dial(SIP/${EXTEN:1}@goautodial,,tTo)
exten => _X.,3,Hangup


i wanna call germany.when i calling any numbers asterisk call 949number ?

i think my extension is bad
help please
sorry for english :)
Last edited by bbakirtas on Thu Dec 06, 2012 7:54 am, edited 1 time in total.
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby bbakirtas » Thu Dec 06, 2012 4:30 am

i sloved my problem
i changed my extension
Code: Select all
exten => _XX.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _XX.,2,Dial(SIP/${EXTEN:1}@goautodial,,tTo)
exten => _XX.,3,Hangup


but now agent login system but agent call only one number next dial not coming?
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby afafa » Thu Dec 06, 2012 6:30 am

hello Evry body
I created a new Carrier as follows:

Account for Entry:
[mylogin]
disallow = all
allow = g729
allow = gsm
allow = ulaw
type = peer ************* I do not know the diference between friend and peer *******
My secret = PW
My login username =
host = 46.18.211.5
dtmfmode = rfc2833
context = trunkinbound
qualify = yes
insecure = very
nat = yes

Dialpan for Entry:
exten => _9X, 1, AGI (agi :/ / 127.0.0.1:4577 / call_log)
exten => _9X, 2, Dial (SIP / $ {EXTEN: 1} @ 46.18.211.5,, tTo)
exten => _9X, 3, Hangup


I then configure eyeBeam.
after that I connect with an agent, its rings, and I hang at Eyebeam and I eventually costing a msg that says I'm the only one in the conference.
  my greatest concern is to make an outgoing call and incoming. when I dial, I get a msg: "it's not available extention"
pleese help .... :(
afafa
 
Posts: 1
Joined: Thu Dec 06, 2012 6:18 am

Re: Goautodial problems

Postby DomeDan » Thu Dec 06, 2012 6:34 am

its because "_9X" should probably be "_9X." (notice the dot at the end) change that on all 3 lines in the dialplan
and dont hijack other peoples threads, create a new instead
Vicidial Partner. Region: Sweden/Norway.
Does Vicidial installation, configuration, customization, add-ons, CRM implementation, support, upgrading, network-related, pentesting etc. Remote and onsite assistance.
Email: domedan (at) gmail.com
DomeDan
 
Posts: 1226
Joined: Tue Jan 04, 2011 9:17 am
Location: Sweden

Re: Goautodial problems

Postby bbakirtas » Thu Dec 06, 2012 7:53 am

try my extension

Code: Select all
exten => _XX.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _XX.,2,Dial(SIP/${EXTEN:1}@[b]goautodial[/b],,tTo)
exten => _XX.,3,Hangup


change goautodial to mylogin
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby DomeDan » Thu Dec 06, 2012 8:02 am

bbakirtas: oh, there is certainly your problem, you don't want to use "_XX." because that will match almost everything and will mess up the inner workings of the vicidial system.
use "_9X." if your not sure what to write there,
and set "Dial Prefix:" (in campaign detail settings) to "9"
Vicidial Partner. Region: Sweden/Norway.
Does Vicidial installation, configuration, customization, add-ons, CRM implementation, support, upgrading, network-related, pentesting etc. Remote and onsite assistance.
Email: domedan (at) gmail.com
DomeDan
 
Posts: 1226
Joined: Tue Jan 04, 2011 9:17 am
Location: Sweden

Re: Goautodial problems

Postby bbakirtas » Thu Dec 06, 2012 10:05 am

how i can edit Customer Information or add field?
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby bbakirtas » Thu Dec 06, 2012 11:26 am

i cant login agent002

all config same

Code: Select all
 

[Dec  6 11:20:32] VERBOSE[4187] logger.c: [Dec  6 11:20:32]     -- Executing [8600051@default:1] MeetMe("SIP/8001-00000004", "8600051|F") in new stack
[Dec  6 11:20:32] VERBOSE[4187] logger.c: [Dec  6 11:20:32]   == Parsing '/etc/asterisk/meetme.conf': [Dec  6 11:20:32] VERBOSE[4187] logger.c: [Dec  6 11:20:32] Found
[Dec  6 11:20:32] VERBOSE[4187] logger.c: [Dec  6 11:20:32]   == Parsing '/etc/asterisk/meetme-vicidial.conf': [Dec  6 11:20:32] VERBOSE[4187] logger.c: [Dec  6 11:20:32] Found
[Dec  6 11:20:32] VERBOSE[4187] logger.c: [Dec  6 11:20:32]     -- Created MeetMe conference 1023 for conference '8600051'
[Dec  6 11:20:32] VERBOSE[4187] logger.c: [Dec  6 11:20:32]     --  Playing 'conf-onlyperson' (language 'en')
[Dec  6 11:20:34] VERBOSE[4171] logger.c: [Dec  6 11:20:34]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:20:38] VERBOSE[4212] logger.c: [Dec  6 11:20:38]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:20:38] VERBOSE[4212] logger.c: [Dec  6 11:20:38] Found
[Dec  6 11:20:38] VERBOSE[4212] logger.c: [Dec  6 11:20:38]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:20:38] VERBOSE[4187] logger.c: [Dec  6 11:20:38]   == Spawn extension (default, 8600051, 1) exited non-zero on 'SIP/8001-00000004'
[Dec  6 11:20:38] VERBOSE[4187] logger.c: [Dec  6 11:20:38]     -- Executing [h@default:1] DeadAGI("SIP/8001-00000004", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
[Dec  6 11:20:38] VERBOSE[4187] logger.c: [Dec  6 11:20:38]     -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0
[Dec  6 11:20:38] VERBOSE[4214] logger.c: [Dec  6 11:20:38]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:20:38] VERBOSE[4214] logger.c: [Dec  6 11:20:38] Found
[Dec  6 11:20:38] VERBOSE[4214] logger.c: [Dec  6 11:20:38]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:20:38] VERBOSE[4215] logger.c: [Dec  6 11:20:38]     -- Executing [55558600051@default:1] MeetMeAdmin("Local/55558600051@default-04a0,2", "8600051|K") in new stack
[Dec  6 11:20:38] WARNING[4215] app_meetme.c: Conference number '8600051' not found!
[Dec  6 11:20:38] VERBOSE[4215] logger.c: [Dec  6 11:20:38]     -- Executing [55558600051@default:2] Hangup("Local/55558600051@default-04a0,2", "") in new stack
[Dec  6 11:20:38] VERBOSE[4215] logger.c: [Dec  6 11:20:38]   == Spawn extension (default, 55558600051, 2) exited non-zero on 'Local/55558600051@default-04a0,2'
[Dec  6 11:20:38] VERBOSE[4215] logger.c: [Dec  6 11:20:38]     -- Executing [h@default:1] DeadAGI("Local/55558600051@default-04a0,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
[Dec  6 11:20:38] VERBOSE[4215] logger.c: [Dec  6 11:20:38]     -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0
[Dec  6 11:20:40] VERBOSE[4212] logger.c: [Dec  6 11:20:40]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:20:40] VERBOSE[4214] logger.c: [Dec  6 11:20:40]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:21:01] VERBOSE[4392] logger.c: [Dec  6 11:21:01]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:21:01] VERBOSE[4392] logger.c: [Dec  6 11:21:01] Found
[Dec  6 11:21:01] VERBOSE[4392] logger.c: [Dec  6 11:21:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:21:01] VERBOSE[4401] logger.c: [Dec  6 11:21:01]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:21:01] VERBOSE[4401] logger.c: [Dec  6 11:21:01] Found
[Dec  6 11:21:01] VERBOSE[4401] logger.c: [Dec  6 11:21:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:21:01] VERBOSE[4392] logger.c: [Dec  6 11:21:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:21:01] VERBOSE[4401] logger.c: [Dec  6 11:21:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:21:06] VERBOSE[4742] logger.c: [Dec  6 11:21:06]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:21:06] VERBOSE[4742] logger.c: [Dec  6 11:21:06] Found
[Dec  6 11:21:06] VERBOSE[4742] logger.c: [Dec  6 11:21:06]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:21:06] VERBOSE[4742] logger.c: [Dec  6 11:21:06]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:21:48] VERBOSE[4880] logger.c: [Dec  6 11:21:48]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:21:48] VERBOSE[4880] logger.c: [Dec  6 11:21:48] Found
[Dec  6 11:21:48] VERBOSE[4880] logger.c: [Dec  6 11:21:48]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:21:50] VERBOSE[4880] logger.c: [Dec  6 11:21:50]        > Channel SIP/8003-00000005 was answered.
[Dec  6 11:21:50] VERBOSE[4888] logger.c: [Dec  6 11:21:50]   == Starting SIP/8003-00000005 at default,,1 failed so falling back to exten 's'
[Dec  6 11:21:50] VERBOSE[4888] logger.c: [Dec  6 11:21:50]   == Starting SIP/8003-00000005 at default,s,1 still failed so falling back to context 'default'
[Dec  6 11:21:50] VERBOSE[4888] logger.c: [Dec  6 11:21:50]     -- Sent into invalid extension 's' in context 'default' on SIP/8003-00000005
[Dec  6 11:21:50] VERBOSE[4888] logger.c: [Dec  6 11:21:50]     -- Executing [i@default:1] Playback("SIP/8003-00000005", "invalid") in new stack
[Dec  6 11:21:50] VERBOSE[4888] logger.c: [Dec  6 11:21:50]     --  Playing 'invalid' (language 'en')
[Dec  6 11:21:52] VERBOSE[4880] logger.c: [Dec  6 11:21:52]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:21:54] VERBOSE[4888] logger.c: [Dec  6 11:21:54]   == Auto fallthrough, channel 'SIP/8003-00000005' status is 'UNKNOWN'
[Dec  6 11:21:54] VERBOSE[4888] logger.c: [Dec  6 11:21:54]     -- Executing [h@default:1] DeadAGI("SIP/8003-00000005", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
[Dec  6 11:21:54] VERBOSE[4888] logger.c: [Dec  6 11:21:54]     -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0
[Dec  6 11:22:01] VERBOSE[4940] logger.c: [Dec  6 11:22:01]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:22:01] VERBOSE[4940] logger.c: [Dec  6 11:22:01] Found
[Dec  6 11:22:01] VERBOSE[4940] logger.c: [Dec  6 11:22:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:22:01] VERBOSE[4943] logger.c: [Dec  6 11:22:01]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:22:01] VERBOSE[4943] logger.c: [Dec  6 11:22:01] Found
[Dec  6 11:22:01] VERBOSE[4943] logger.c: [Dec  6 11:22:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:22:01] VERBOSE[4943] logger.c: [Dec  6 11:22:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:22:01] VERBOSE[4940] logger.c: [Dec  6 11:22:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:22:06] VERBOSE[5298] logger.c: [Dec  6 11:22:06]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:22:06] VERBOSE[5298] logger.c: [Dec  6 11:22:06] Found
[Dec  6 11:22:06] VERBOSE[5298] logger.c: [Dec  6 11:22:06]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:22:06] VERBOSE[5298] logger.c: [Dec  6 11:22:06]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:23:01] VERBOSE[5482] logger.c: [Dec  6 11:23:01]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:23:01] VERBOSE[5482] logger.c: [Dec  6 11:23:01] Found
[Dec  6 11:23:01] VERBOSE[5482] logger.c: [Dec  6 11:23:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:23:01] VERBOSE[5485] logger.c: [Dec  6 11:23:01]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:23:01] VERBOSE[5485] logger.c: [Dec  6 11:23:01] Found
[Dec  6 11:23:01] VERBOSE[5485] logger.c: [Dec  6 11:23:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:23:01] VERBOSE[5482] logger.c: [Dec  6 11:23:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:23:01] VERBOSE[5485] logger.c: [Dec  6 11:23:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:23:06] VERBOSE[5845] logger.c: [Dec  6 11:23:06]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:23:06] VERBOSE[5845] logger.c: [Dec  6 11:23:06] Found
[Dec  6 11:23:06] VERBOSE[5845] logger.c: [Dec  6 11:23:06]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:23:06] VERBOSE[5845] logger.c: [Dec  6 11:23:06]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:23:45] VERBOSE[2994] logger.c: [Dec  6 11:23:45]   == Refreshing DNS lookups.
[Dec  6 11:23:45] VERBOSE[2994] logger.c: [Dec  6 11:23:45]   == Refreshing DNS lookups.
[Dec  6 11:24:01] VERBOSE[6032] logger.c: [Dec  6 11:24:01]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:24:01] VERBOSE[6032] logger.c: [Dec  6 11:24:01] Found
[Dec  6 11:24:01] VERBOSE[6032] logger.c: [Dec  6 11:24:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:24:01] VERBOSE[6034] logger.c: [Dec  6 11:24:01]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:24:01] VERBOSE[6034] logger.c: [Dec  6 11:24:01] Found
[Dec  6 11:24:01] VERBOSE[6034] logger.c: [Dec  6 11:24:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:24:01] VERBOSE[6032] logger.c: [Dec  6 11:24:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:24:01] VERBOSE[6034] logger.c: [Dec  6 11:24:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:24:06] VERBOSE[6395] logger.c: [Dec  6 11:24:06]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:24:06] VERBOSE[6395] logger.c: [Dec  6 11:24:06] Found
[Dec  6 11:24:06] VERBOSE[6395] logger.c: [Dec  6 11:24:06]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:24:06] VERBOSE[6395] logger.c: [Dec  6 11:24:06]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:24:59] VERBOSE[6780] logger.c: [Dec  6 11:24:59]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:24:59] VERBOSE[6780] logger.c: [Dec  6 11:24:59] Found
[Dec  6 11:24:59] VERBOSE[6780] logger.c: [Dec  6 11:24:59]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:24:59] NOTICE[6780] channel.c: Unable to request channel SIP/8002
[Dec  6 11:25:01] VERBOSE[6780] logger.c: [Dec  6 11:25:01]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:25:01] VERBOSE[6821] logger.c: [Dec  6 11:25:01]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:25:01] VERBOSE[6821] logger.c: [Dec  6 11:25:01] Found
[Dec  6 11:25:01] VERBOSE[6821] logger.c: [Dec  6 11:25:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:25:01] VERBOSE[6825] logger.c: [Dec  6 11:25:01]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:25:01] VERBOSE[6825] logger.c: [Dec  6 11:25:01] Found
[Dec  6 11:25:01] VERBOSE[6825] logger.c: [Dec  6 11:25:01]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:25:02] VERBOSE[6821] logger.c: [Dec  6 11:25:02]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:25:02] VERBOSE[6825] logger.c: [Dec  6 11:25:02]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:25:07] VERBOSE[7190] logger.c: [Dec  6 11:25:07]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:25:07] VERBOSE[7190] logger.c: [Dec  6 11:25:07] Found
[Dec  6 11:25:07] VERBOSE[7190] logger.c: [Dec  6 11:25:07]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:25:07] VERBOSE[7190] logger.c: [Dec  6 11:25:07]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:25:17] VERBOSE[3056] logger.c: [Dec  6 11:25:17]     -- Unregistered SIP '8003'
[Dec  6 11:25:18] VERBOSE[3056] logger.c: [Dec  6 11:25:18]     -- Registered SIP '8002' at 192.168.2.169 port 56252
[Dec  6 11:25:18] VERBOSE[3056] logger.c: [Dec  6 11:25:18]     -- Saved useragent "eyeBeam release 1003s stamp 31159" for peer 8002
[Dec  6 11:25:18] NOTICE[3056] chan_sip.c: Peer '8002' is now Reachable. (8ms / 2000ms)
[Dec  6 11:25:19] VERBOSE[7261] logger.c: [Dec  6 11:25:19]   == Parsing '/etc/asterisk/manager.conf': [Dec  6 11:25:19] VERBOSE[7261] logger.c: [Dec  6 11:25:19] Found
[Dec  6 11:25:19] VERBOSE[7261] logger.c: [Dec  6 11:25:19]   == Manager 'sendcron' logged on from 127.0.0.1
[Dec  6 11:25:29] VERBOSE[7261] logger.c: [Dec  6 11:25:29]        > Channel SIP/8002-00000006 was answered.
[Dec  6 11:25:29] VERBOSE[7384] logger.c: [Dec  6 11:25:29]   == Starting SIP/8002-00000006 at default,,1 failed so falling back to exten 's'
[Dec  6 11:25:29] VERBOSE[7384] logger.c: [Dec  6 11:25:29]   == Starting SIP/8002-00000006 at default,s,1 still failed so falling back to context 'default'
[Dec  6 11:25:29] VERBOSE[7384] logger.c: [Dec  6 11:25:29]     -- Sent into invalid extension 's' in context 'default' on SIP/8002-00000006
[Dec  6 11:25:29] VERBOSE[7384] logger.c: [Dec  6 11:25:29]     -- Executing [i@default:1] Playback("SIP/8002-00000006", "invalid") in new stack
[Dec  6 11:25:29] VERBOSE[7384] logger.c: [Dec  6 11:25:29]     --  Playing 'invalid' (language 'en')
[Dec  6 11:25:31] VERBOSE[7261] logger.c: [Dec  6 11:25:31]   == Manager 'sendcron' logged off from 127.0.0.1
[Dec  6 11:25:33] VERBOSE[7384] logger.c: [Dec  6 11:25:33]   == Auto fallthrough, channel 'SIP/8002-00000006' status is 'UNKNOWN'
[Dec  6 11:25:33] VERBOSE[7384] logger.c: [Dec  6 11:25:33]     -- Executing [h@default:1] DeadAGI("SIP/8002-00000006", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
[Dec  6 11:25:33] VERBOSE[7384] logger.c: [Dec  6 11:25:33]     -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0


i want join 8002 but icant

sorry there are no available sessions
but i can login 8001 agent001
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby williamconley » Thu Dec 06, 2012 12:29 pm

bbakirtas wrote:how i can edit Customer Information or add field?


when you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.

this IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20258
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Goautodial problems

Postby bbakirtas » Thu Dec 06, 2012 12:38 pm

oke
goautodial-ce-2.1 final.iso
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby williamconley » Thu Dec 06, 2012 12:51 pm

vicidial version with build
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20258
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Goautodial problems

Postby bbakirtas » Fri Dec 07, 2012 2:40 am

VERSION: 2.4-309a
BUILD: 110430-1642
© 2011 ViciDial Group
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby bbakirtas » Fri Dec 07, 2012 3:46 am

my sip-vicidial.conf
Code: Select all
[goautodial]
disallow=all
allow=ulaw
allow=alaw
type=friend
username=username
secret=pass
host=host
dtmfmode=rfc2833
fromhost=host
fromuser=username
qualify=yes
insecure=port
canreinvite=yes
nat=yes



[8001]
username=8001
secret=goautodial
accountcode=8001
callerid="8001" <00000>
mailbox=8001
context=default
disallow=all
allow=ulaw
allow=alaw
allow=g729
type=friend
host=dynamic

[8002]
username=8002
secret=goautodial
accountcode=8002
callerid="8002" <00000>
mailbox=8002
context=default
disallow=all
allow=ulaw
allow=alaw
allow=g729
type=friend
host=dynamic

[8003]
username=8003
secret=goautodial
accountcode=8003
callerid="8003" <0000000000>
mailbox=8003
context=default
disallow=all
allow=ulaw
allow=alaw
allow=g729
type=friend
host=dynamic

[8004]
username=8004
secret=goautodial
accountcode=8004
callerid="8004" <0000000000>
mailbox=8004
context=default
disallow=all
allow=ulaw
allow=alaw
allow=g729
type=friend
host=dynamic

[8005]
username=8005
secret=goautodial
accountcode=8005
callerid="8005" <0000000000>
mailbox=8005
context=default
disallow=all
allow=ulaw
allow=alaw
allow=g729
type=friend
host=dynamic

[9001]
username=9001
secret=goautodial
accountcode=9001
callerid="" <000>
mailbox=9001
context=default
disallow=all
allow=ulaw
allow=alaw
allow=g729
type=friend
host=dynamic

[9003]
username=9003
secret=goautodial
accountcode=9003
callerid="9003" <00093>
mailbox=9003
context=default
disallow=all
allow=ulaw
allow=alaw
allow=g729
type=friend
host=dynamic


my extensions-vicidial.conf
Code: Select all
; Phones direct dial extensions:
exten => 8001,1,Dial(SIP/8001|60|)
exten => 8001,2,Goto(default,850266666666668001,1)
exten => 8002,1,Dial(SIP/8002|60|)
exten => 8002,2,Goto(default,850266666666668002,1)
exten => 8003,1,Dial(SIP/8003|60|)
exten => 8003,2,Goto(default,850266666666668003,1)
exten => 8004,1,Dial(SIP/8004|60|)
exten => 8004,2,Goto(default,850266666666668004,1)
exten => 8005,1,Dial(SIP/8005|60|)
exten => 8005,2,Goto(default,850266666666668005,1)
exten => 9001,1,Dial(SIP/9001|60|)
exten => 9001,2,Goto(default,850266666666669001,1)
exten => 9003,1,Dial(SIP/9003|60|)
exten => 9003,2,Goto(default,850266666666669003,1)

eyebeam say : "Sorry, not a valid extension, please try again"
goautodial say : "Sorry, there are no available sessions"
only one agent can be login no more
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby bbakirtas » Fri Dec 07, 2012 6:12 am

i fixed it
update conference table in mysql and its work

next question how i limited to auto calls
system online 10 auto call only?
how i can do its 20
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby DomeDan » Fri Dec 07, 2012 6:16 am

alright.

If I guess right what your thinking...
its the setting: "Auto Dial Limit:" under "System Settings"
Vicidial Partner. Region: Sweden/Norway.
Does Vicidial installation, configuration, customization, add-ons, CRM implementation, support, upgrading, network-related, pentesting etc. Remote and onsite assistance.
Email: domedan (at) gmail.com
DomeDan
 
Posts: 1226
Joined: Tue Jan 04, 2011 9:17 am
Location: Sweden

Re: Goautodial problems

Postby bbakirtas » Fri Dec 07, 2012 6:55 am

thanks
i changed to 20 but im looking Real-Time All Campaigns Summary its show 10 calling
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby DomeDan » Fri Dec 07, 2012 7:12 am

did you change the ratio to 20 for the specific campaign too?
Vicidial Partner. Region: Sweden/Norway.
Does Vicidial installation, configuration, customization, add-ons, CRM implementation, support, upgrading, network-related, pentesting etc. Remote and onsite assistance.
Email: domedan (at) gmail.com
DomeDan
 
Posts: 1226
Joined: Tue Jan 04, 2011 9:17 am
Location: Sweden

Re: Goautodial problems

Postby bbakirtas » Fri Dec 07, 2012 7:23 am

i fixed
admin -> servers VICIDIAL TRUNKS FOR THIS SERVER:
:D
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby DomeDan » Fri Dec 07, 2012 7:46 am

Great!
And a post-back with the solution, thats good!

But ratio 20 sounds a bit extreme... well well
Vicidial Partner. Region: Sweden/Norway.
Does Vicidial installation, configuration, customization, add-ons, CRM implementation, support, upgrading, network-related, pentesting etc. Remote and onsite assistance.
Email: domedan (at) gmail.com
DomeDan
 
Posts: 1226
Joined: Tue Jan 04, 2011 9:17 am
Location: Sweden

Re: Goautodial problems

Postby bbakirtas » Fri Dec 07, 2012 8:23 am

yes its extreme we testing goautodial

my big problem is answering machines
answering machine come to my agents
i wanna answering machines not come to my agents
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby bbakirtas » Fri Dec 07, 2012 10:01 am

i need quality call control goautodial has a quality call but this link say (http://www.vicidial.org/docs/Vicidial_Q ... ual_v1.pdf) you must install??

i must install quality call control ??
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey

Re: Goautodial problems

Postby williamconley » Fri Dec 07, 2012 4:05 pm

all you need for that is to upgrade to the latest version of Vicidial (it's built-in to trunk now).

You can upgrade your Vicidial in that server, but you'll lose the pretty goautodial agent screen. On the other hand, you'll gain a lot of the new stuff (including QC).

Or you can just install with Vicibox instead of GoAuto and it will take you all the way up to latest trunk just by installing.

It is possible to install just QC, but not from the Vicidial servers, and it is only available for specific Vicidial Versions (others may require a bit of tweaking to the DIFFs to get a clean installation). And beware that the upgrade path using that version is not perfect either as there were a few changes that may affect upgrade down the road to the built-in QC from the DIFF file version before QC became part of Vici.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20258
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Goautodial problems

Postby bbakirtas » Mon Dec 10, 2012 6:17 am

next question :D

i wanna 1 lead using 2 campaign
Vicibox 9.0.1
VERSION: 2.14-738a
BUILD: 200210-1628
Intel Xeon X5650 12 Core HT 24 Core 2.90 Ghz
64 GB ECC Registered Memory
bbakirtas
 
Posts: 93
Joined: Thu Dec 06, 2012 3:35 am
Location: Turkey


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: No registered users and 33 guests