fastagi upgrade from 2.0.1

[gerski]

Hello Guys,

this sounds weird but i have upgraded one of my server to 2.0.2 and the fastagi is still not working..

here is my screen -r

Code: Select all

root@Asterisk2:/etc/asterisk# screen -r
There are several suitable screens on:
        3668.asterisk   (Detached)
        3800.ASTupdate  (Detached)
        3803.ASTsend    (Detached)
        3806.ASTlisten  (Detached)
        3809.ASTVDauto  (Detached)
        3812.ASTVDremote        (Detached)
        3815.ASTVDadapt (Detached)
        3821.ASTVDautoFILL      (Detached)
Type "screen [-d] -r [pid.]tty.host" to resume one of them.

cpan

Code: Select all

root@Asterisk2:/etc/asterisk# cpan
CPAN: File::HomeDir loaded ok

cpan shell -- CPAN exploration and modules installation (v1.8802)
ReadLine support enabled

                                                                                                                                                             cpan[1]> install Net::Server
CPAN: Storable loaded ok
Going to read /root/.cpan/Metadata
  Database was generated on Mon, 05 Mar 2007 20:09:27 GMT
Net::Server is up to date (0.95).

extensions.conf

Code: Select all

    -- Executing AGI("SIP/8888-081e0650", "agi://127.0.0.1:4577/call_log") in new stack
Mar  6 21:05:00 WARNING[4746]: res_agi.c:210 launch_netscript: Connect to 'agi://127.0.0.1:4577/call_log' failed: Connection refused
  == Spawn extension (default, 12026476575, 1) exited non-zero on 'SIP/8888-081e0650'
    -- Executing DeadAGI("SIP/8888-081e0650", "agi://127.0.0.1:4577/call_log") in new stack
Mar  6 21:05:00 WARNING[4746]: res_agi.c:210 launch_netscript: Connect to 'agi://127.0.0.1:4577/call_log' failed: Connection refused
  == Spawn extension (default, h, 1) exited non-zero on 'SIP/8888-081e0650'

astguiclient.conf

Code: Select all

# astguiclient.conf - configuration elements for the astguiclient package
# this is the astguiclient configuration file
# all comments will be lost if you run install.pl again

# Paths used by astGUIclient
PATHhome => /usr/share/astguiclient
PATHlogs => /var/log/astguiclient
PATHagi => /var/lib/asterisk/agi-bin
PATHsounds => /var/lib/asterisk/sounds
PATHmonitor => /var/spool/asterisk/monitor

# The IP address of this machine
VARserver_ip => 192.168.0.22

# Database connection information
VARDB_server => 192.168.0.20
VARDB_database => asterisk
VARDB_user => cron
VARDB_pass => 1234
VARDB_port => 3306

# Alpha-Numeric list of the astGUIclient processes to be kept running
# (value should be listing of characters with no spaces: 123456)
#  X - NO KEEPALIVE PROCESSES (use only if you want none to be keepalive)
#  1 - AST_update
#  2 - AST_send_listen
#  3 - AST_VDauto_dial
#  4 - AST_VDremote_agents
#  5 - AST_VDadapt (If multi-server system, this must only be on one server)
#  6 - FastAGI_log
#  7 - AST_VDauto_dial_FILL (only for multi-server, this must only be on one server)
VARactive_keepalives => 1234576

# Settings for FastAGI logging server
VARfastagi_log_min_servers => 3
VARfastagi_log_max_servers => 16
VARfastagi_log_min_spare_servers => 2
VARfastagi_log_max_spare_servers => 8
VARfastagi_log_max_requests => 1000
VARfastagi_log_checkfordead => 30
VARfastagi_log_checkforwait => 60

hope guys you can help me.. i also have installed asterisk perl 0.08 still not working...

[mflorell]

What happens when you run:

/usr/share/astguiclient/FastAGI_log.pl --debugX

from command line?

[gerski]

Code: Select all

usr/share/astguiclient/FastAGI_log.pl --debugX
Can't locate Net/Server.pm in @INC (@INC contains: /usr/lib/perl5/5.8.7/i486-linux /usr/lib/perl5/5.8.7 /usr/lib/perl5/site_perl/5.8.7/i486-linux /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl .) at /usr/share/astguiclient/FastAGI_log.pl line 129.
BEGIN failed--compilation aborted at /usr/share/astguiclient/FastAGI_log.pl line 129.

it seems like it is still accessing my perl 5.8.7 i have upgraded my perl to 5.8.8...

Code: Select all

locate Server.pm
/usr/lib/perl5/site_perl/5.8.7/i486-linux/DBI/ProxyServer.pm
/usr/local/lib/perl5/site_perl/5.8.8/i686-linux/DBI/ProxyServer.pm
/usr/local/lib/perl5/site_perl/5.8.8/Net/Server.pm
/usr/local/DBI-1.53/lib/DBI/ProxyServer.pm
/usr/local/DBI-1.53/blib/lib/DBI/ProxyServer.pm
/usr/local/Net-Server-0.95/lib/Net/Server.pm
/usr/local/Net-Server-0.95/blib/lib/Net/Server.pm
/root/.cpan/build/Net-Server-0.95/lib/Net/Server.pm
/root/.cpan/build/Net-Server-0.95/blib/lib/Net/Server.pm
/root/.cpan/build/DBI-1.54/lib/DBI/ProxyServer.pm
/root/.cpan/build/DBI-1.54/blib/lib/DBI/ProxyServer.pm

[mflorell]

What Linux distro are you using?

[gerski]

slackware 10.2

[gerski]

here is my perl version

Code: Select all

root@Asterisk2:/usr/local/perl-5.8.8# perl -V
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.17.11, archname=i686-linux
    uname='linux asterisk2 2.6.17.11 #1 smp preempt mon nov 13 12:08:07 pht 2006 i686 unknown unknown gnulinux '
    config_args='-de'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='3.3.6', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    libc=/lib/libc-2.3.5.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.5'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'


Characteristics of this binary (from libperl):
  Compile-time options: PERL_MALLOC_WRAP USE_LARGE_FILES USE_PERLIO
  Built under linux
  Compiled at Mar  7 2007 14:29:59
  @INC:
    /usr/local/lib/perl5/5.8.8/i686-linux
    /usr/local/lib/perl5/5.8.8
    /usr/local/lib/perl5/site_perl/5.8.8/i686-linux
    /usr/local/lib/perl5/site_perl/5.8.8
    /usr/local/lib/perl5/site_perl

but whenver i try to run fastagi it still accessing the 5.8.7, is there any way that i can use my new perl and disregard the old one..

[gardo]

you can try symlinking the new perl to the old perl version. it's not the most elegant solution though.