How to Disable REGISTRATION of xlite

[gmcust3]

How to Disable REGISTRATION of xlite over WAN , if my server is on Public(WAN) and also on Lan ?

[gmcust3]

I guess Below One should work in sip file :

contactdeny=0.0.0.0/0.0.0.0
contactpermit=192.168.10.0/255.255.255.0
deny=0.0.0.0/0.0.0.0
permit=192.168.10.0/255.255.255.0

But to make it workable, I have to sip-vicidial.conf file under etc/asterisk folder.

But If I modify file, I see another line which says :


; WARNING- THIS FILE IS AUTO-GENERATED BY VICIDIAL, ANY EDITS YOU MAKE WILL BE LOST


How to implement below changes in the sip-vicidial.conf file ?

contactdeny=0.0.0.0/0.0.0.0
contactpermit=192.168.10.0/255.255.255.0
deny=0.0.0.0/0.0.0.0
permit=192.168.10.0/255.255.255.0

[striker]

use the template option under admin

select the SIP_generic

under template Contents enter your sip settings
lik
deny=
permit
disallow=
allow=
bla bla

and in the phone select this template for all the sip phones .

[gmcust3]

Code: Select all

 in the phone select this template for all the sip phones

Where exactly ?

[DomeDan]

Its under "Admin" -> "Templates"
create a new template with your settings

and for every phone in the phone-settings set that "Template ID"

[gmcust3]

But my xlite registration in local IP showed 404 error.

[gmcust3]

When I use

contactdeny=0.0.0.0/0.0.0.0
contactpermit=192.168.10.0/255.255.255.0
deny=0.0.0.0/0.0.0.0
permit=192.168.10.0/255.255.255.0

as template under phone entry.


From Public IP and also from Local IP it shows Registration Error.

[DomeDan]

What address range do you use on your local network?

[gmcust3]

192.168.0.1 to 192.168.10.200

[DomeDan]

ok, then change the allow to:
192.168.0.0/255.255.0.0
that will match 192.168.X.X

[gmcust3]

Tried :

contactdeny=0.0.0.0/0.0.0.0
contactpermit=192.168.0.0/255.255.255.0
deny=0.0.0.0/0.0.0.0
permit=192.168.0.0/255.255.255.0

But Not working.

[DomeDan]

you didnt write it right
copy/paste this:

contactdeny=0.0.0.0/0.0.0.0
contactpermit=192.168.0.0/255.255.0.0
deny=0.0.0.0/0.0.0.0
permit=192.168.0.0/255.255.0.0

[gmcust3]

Tried...

When I tried sip show peers , It NOT showing in the list.

[DomeDan]

* disable the template, do a reload in asterisk
* verify that the phone can register check in the asterisk cli what is happening.
* and post it here
* enable the template, do a reload in asterisk
* verify that the phone got a ip address like 192.168.X.X
* try to let the phone register and check in the asterisk cli what is happening.
* if there is any activity in the cli then post it here
* if not then run ngrep-sip and let the phone register again
* and post the output here

* post the content of /etc/asterisk/sip-vicidial.conf for a phone in question

[williamconley]

1) did you actually use 255.255.0.0 (not 255.255.255.0)? That seems like it may have been lost in the conversation above

2) not showing in sip peers is not in any way related to permit or deny. If it is not showing then it isn't in the sip-vicidial.conf or sip-vicidial.conf has not loaded into asterisk. Find out which.

3) 2.2.1? Really? Why don't you upgrade ?

[gmcust3]

Using Kernel Version 2.6.18-238.9.1.el5.goPAE (SMP)

[gmcust3]

Still Not Resolved.

[DomeDan]

try to work with us here, did you write 255.255.255.0 or 255.255.0.0?

[gmcust3]

I tried :

contactdeny=0.0.0.0/0.0.0.0
contactpermit=192.168.0.0/255.255.0.0
deny=0.0.0.0/0.0.0.0
permit=192.168.0.0/255.255.0.0

I want my Phone to get Register from Local IP but Not from Public IP.

If I use above template, Its NOT getting registered from either IP.

[DomeDan]

ok, a wise man once wrote this:

* disable the template, do a reload in asterisk
* verify that the phone can register check in the asterisk cli what is happening.
* and post it here
* enable the template, do a reload in asterisk
* verify that the phone got a ip address like 192.168.X.X
* try to let the phone register and check in the asterisk cli what is happening.
* if there is any activity in the cli then post it here
* if not then run ngrep-sip and let the phone register again
* and post the output here

* post the content of /etc/asterisk/sip-vicidial.conf for a phone in question

try that

[gmcust3]

[cc131]
username=cc131
secret=test
accountcode=cc131
callerid="station 131" <0000000000>
mailbox=131
contactdeny=0.0.0.0/0.0.0.0
contactpermit=192.168.0.0/255.255.0.0
deny=0.0.0.0/0.0.0.0
permit=192.168.0.0/255.255.0.0

[DomeDan]

awesome keep it comming!
asterisk cli and ngrep-sip when the phone tries to register is what i would like to see now

[gmcust3]

30 agent dialing now... So, CLI is running like anything