Vcidial/admin.php page does not load

[jdelacruz033086]

Hi Everyone,

I'm a newbie here and at Ubuntu Linux. Can please help me because it's my first time I did make a dialer. After following instructions at vcidial for dummies I then restarted my server. After putting the command screen -ls only these things appeared-root@DialerJay:/var/run/screen/S-root# screen -ls
There are screens on:
5237.ASTVDauto (Detached)
4732.ASTfastlog (Detached)
4729.ASTVDadapt (Detached)
4626.asterisk (Detached)
4 Sockets in /var/run/screen/S-root.

And then I opened up firefox browser and entered my_ipaddress/vcidial/admin.php the page won't appear. I would really appreciate any help guys. I want to explore making this dialer and how to troubleshoot it.

Jay

[williamconley]

Start over! Install from the .iso available at Vicibox.com (or goautodial.com?). Vicibox.com has a PDF with installation instructions (goauto has a wiki). After you complete the primary installation with one of those two, you can download the Vicidial Manager's Manual from EFLO.net and use it to configure your system.

If you insist on Ubuntu, PoundTeam is looking for participants in our Beta program for our ubuntu .iso installer for Ubuntu 12.04LTS with Vicidial in it.

Of course, if you want to try to troubleshoot your existing system, you'll need to get the rest of your screens online. Did you modify your IP after the installation? Also "my_ipaddress/vcidial/admin.php" is missing an "i" in vicidial (which could cause the page to fail ...).

Here are your newbie suggestions!

when you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.

this IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

[gardo]

The GoAutoDial CE ISO is available at http://goautodial.org. That's our open source project page.

Start over! Install from the .iso available at Vicibox.com (or goautodial.com?). Vicibox.com has a PDF with installation instructions (goauto has a wiki). After you complete the primary installation with one of those two, you can download the Vicidial Manager's Manual from EFLO.net and use it to configure your system.

You can also read our Getting Started Guide on our website (http://goautodial.org). This will help jumpstart your cidial Viexperience.

[boybawang]

Hi Everyone,

I'm a newbie here and at Ubuntu Linux. Can please help me because it's my first time I did make a dialer. After following instructions at vcidial for dummies I then restarted my server. After putting the command screen -ls only these things appeared-root@DialerJay:/var/run/screen/S-root# screen -ls
There are screens on:
5237.ASTVDauto (Detached)
4732.ASTfastlog (Detached)
4729.ASTVDadapt (Detached)
4626.asterisk (Detached)
4 Sockets in /var/run/screen/S-root.

And then I opened up firefox browser and entered my_ipaddress/vcidial/admin.php the page won't appear. I would really appreciate any help guys. I want to explore making this dialer and how to troubleshoot it.

Jay

4 sockets means you have something missing in your installation, check if all perl modules are installed, check if dahdi is compiled with asterisk, also check if asterisk-perl is also compiled and lastly the web directory of ubuntu is /var/www i am guessing that you didnt alter the web dir of your installation

[boybawang]

also check if your php.ini memory_limit setting is set to above 48M but the default php.ini memory_limit of ubuntu server is 128M