Sangoma AMD solution

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Sangoma AMD solution

Postby ameir1 » Tue Apr 23, 2013 7:51 pm

We are looking at Sangoma Lyra AMD - what is the recommended vicidial configuration for this?
What are everyone's experiences with this? Installation difficulties?

We have 2 different vicidial setups. One is a single server XeonCPU E5440 @ 2.83GHz, 8 cores, 8 GB RAM, 270 GB HDD which has the database, Asterisk 1.4.39.2, and web server running Vicidal VERSION: 2.4-310a BUILD: 110506-1537 with SuSE Linux 11.3
The other is a vicidial cluster. Same versions of installations, just divided across 2 servers - one is Asterisk and Web server, the other MySQL.
Thanks!
ameir1
 
Posts: 5
Joined: Mon Nov 16, 2009 5:03 pm

Re: Sangoma AMD solution

Postby Michael_N » Wed Apr 24, 2013 2:58 am

vicidial has support for sangoma netborder callanalyser
Michael_N
 
Posts: 687
Joined: Wed Jul 05, 2006 3:13 pm
Location: sweden

Re: Sangoma AMD solution

Postby mflorell » Wed Apr 24, 2013 6:00 am

Lyra is just another name for Sangoma's Netborder Call Analyzer. Sometimes referred to as CPD(Call Progress Detection) or CPA(Call Progress Analysis). Vicidial has integrated with it for several years and it works great if integrated properly.
mflorell
Site Admin
 
Posts: 18387
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Sangoma AMD solution

Postby ameir1 » Wed Apr 24, 2013 1:17 pm

"if integrated properly".
Are there any installation issues? We used vicibox for our install which is SUSE and we were told that it needs centos.
As well, do you have special pricing for this product?
ameir1
 
Posts: 5
Joined: Mon Nov 16, 2009 5:03 pm

Re: Sangoma AMD solution

Postby Michael_N » Wed Apr 24, 2013 1:25 pm

Lyra should run on a seperate server windows or centos
Michael_N
 
Posts: 687
Joined: Wed Jul 05, 2006 3:13 pm
Location: sweden

Re: Sangoma AMD solution

Postby ameir1 » Wed Apr 24, 2013 1:35 pm

should it not run on the same server as the asterisk dialer?
ameir1
 
Posts: 5
Joined: Mon Nov 16, 2009 5:03 pm

Re: Sangoma AMD solution

Postby williamconley » Wed Apr 24, 2013 8:41 pm

it requires a dedicated server. while this server may be Linux, there are port conflicts that would stop it from running on the same server.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20258
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Sangoma AMD solution

Postby ameir1 » Thu Apr 25, 2013 3:43 pm

Thanks.
We've set it up on both a Windows Server and Linux, and get the same problem: when we choose to run the call through the proxy with CPA off, it works fine. But when CPA is on, we get one-sided communication. Any ideas?
And that was just testing internal calls - not going outside of our network.
ameir1
 
Posts: 5
Joined: Mon Nov 16, 2009 5:03 pm

Re: Sangoma AMD solution

Postby williamconley » Sat Apr 27, 2013 9:14 pm

probably a routing issue. have a look at your sip packets and see who's failing. usually one-sided sound is a firewall issue. so your "internal" network may have an active iptables or other form of firewall blocking ports it believes should not be in use. if so, turn OFF any internal iptables or other firewalls to test.

also, i've often found that "oddities" introduced in making internal calls will introduce a problem that would never be seen with a "real" call. so look at anything unusual you have done for this call to be internalized. and consider that the cost of one or two test calls is mere pennies. test on a real carrier.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20258
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)


Return to General Discussion

Who is online

Users browsing this forum: Google [Bot] and 61 guests