Invalid Extension in GAD 3.0 64bit

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

Invalid Extension in GAD 3.0 64bit

Postby Nefariousparity » Wed May 08, 2013 11:19 am

So I am using the same carrier information that I did or have going on in my GoAutoDial 2 setup. And am getting the invalid extension.

> Channel SIP/8016-0000000b was answered.
[May 8 09:15:49] -- Executing [8600051@default:1] MeetMe("SIP/8016-0000000b", "8600051|F") in new stack
[May 8 09:15:49] == Parsing '/etc/asterisk/meetme.conf': [May 8 09:15:49] Found
[May 8 09:15:49] == Parsing '/etc/asterisk/meetme-vicidial.conf': [May 8 09:15:49] Found
[May 8 09:15:49] -- Created MeetMe conference 1023 for conference '8600051'
[May 8 09:15:49] -- <SIP/8016-0000000b> Playing 'conf-onlyperson' (language 'en')
[May 8 09:15:51] == Manager 'sendcron' logged off from 127.0.0.1
[May 8 09:15:59] == Parsing '/etc/asterisk/manager.conf': [May 8 09:15:59] Found
[May 8 09:15:59] == Manager 'sendcron' logged on from 127.0.0.1
[May 8 09:15:59] -- Executing [8600051@default:1] MeetMe("Local/8600051@default-b407,2", "8600051|F") in new stack
[May 8 09:15:59] > Channel Local/8600051@default-b407,1 was answered.
[May 8 09:15:59] == Starting Local/8600051@default-b407,1 at default,9119512944547,1 failed so falling back to exten 's'
[May 8 09:15:59] == Starting Local/8600051@default-b407,1 at default,s,1 still failed so falling back to context 'default'
[May 8 09:15:59] -- Sent into invalid extension 's' in context 'default' on Local/8600051@default-b407,1
[May 8 09:15:59] -- Executing [i@default:1] Playback("Local/8600051@default-b407,1", "invalid") in new stack
[May 8 09:15:59] -- <Local/8600051@default-b407,1> Playing 'invalid' (language 'en')

####Here is my carrier information####

[Connecium]
type=peer
host=*.*.*.*
port=5060
dtmfmode=rfc2833
disallow=all
allow=gsm
allow=ulaw
qualify=yes
canreinvite=no
context=trunkoutbound

exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,2,Dial(SIP/${EXTEN:1}@Connecium,,tTo)
exten => _91NXXNXXXXXX,3,Hangup

Carrier to use for this Campaign: Connecium - 91 Connecium
OH and it does say this under the carrier information though I do have Connecium selected.
"There are no campaigns using this carrier."

Thank you in advance. :D
|| DB Schema Version: 1609 || Asterisk 11.25.1-vici || BUILD: 190902-0839 ||VERSION: 2.14-718a||SVN: 3133||10xTelephony||1x Database||1x Slave||1x Web||1x Archive||ViciBox v.8.0.1
Nefariousparity
 
Posts: 327
Joined: Wed Sep 12, 2012 7:01 pm

Re: Invalid Extension in GAD 3.0 64bit

Postby striker » Wed May 08, 2013 12:48 pm

you are dialling extra digits

9119512944547 (13 digits)
91NXXNXXXXXX (12 digits pattern)

add extra one more X

or
you are adding 1 extra in the dialnumber
check your list , if the numbers are correct
and also check the campaign dialprefix is it 9 or 91
www.striker24x7.com www.youtube.com/c/striker24x7 Telegram/skype id : striker24x7
striker
 
Posts: 962
Joined: Sun Jun 06, 2010 10:25 am

Re: Invalid Extension in GAD 3.0 64bit

Postby Nefariousparity » Wed May 08, 2013 1:49 pm

This is one of those things where I thought about doing that and did not. Will test here in a minute, and then let you know! Thanks striker!
|| DB Schema Version: 1609 || Asterisk 11.25.1-vici || BUILD: 190902-0839 ||VERSION: 2.14-718a||SVN: 3133||10xTelephony||1x Database||1x Slave||1x Web||1x Archive||ViciBox v.8.0.1
Nefariousparity
 
Posts: 327
Joined: Wed Sep 12, 2012 7:01 pm


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: No registered users and 126 guests