how to configure my sip account

[be.jeevi]

somebody help me to configure my sip account with my vicidial now ce 1.3..i have installed this sucessfully & in every system i can able to logon as admin as well as agent & i have loaded the lead's also but am not able to configure the sip account i have the manual i tried with the step by step instructions but i was not able to configure this..and i have one more doubt is this sip configuration should be done in server r in any system where i have logged in as administrator can any one help me with clear step by step instructions...

[gmcust3]

Try this :

An Example :
------------------------------------------

Carrier ID: 202_9_Net4
Carrier Name: 202_9_Net4
register =>username:password@202..xx.xxx.xx:5060
Account Entry :
[Sama202_9]
disallow=all
allow=g729
allow=g711
allow=ulaw
type=friend
username=username
fromuser=username
secret=password
host=202.71.XXX.xx
dtmfmode=rfc2833

Globals String: SIP9 = SIP/Sama202_9

Dialplan Entry:

exten => _9X.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9X.,2,Dial(${SIP9}/${EXTEN:2},,tTor)
exten => _9X.,3,Hangup

-----------------------------------------------------
-----------------------------------------------------

Under campaign :
*********************
Omit Phone Code:Y
Dial Prefix :

USA.... 911
UK....9144
AUS....9161

When u upload leads, make sure you have 10 digits phone number.

[be.jeevi]

i have tried this but the call is not connecting with soft phone also..jus tell me whether i have to config this sip settings in my vicidial now server or i can logon to any client system and configure this through admin bcos i don know much in command prompt & i have one more doubt i never spent anything for this dialler i jus lik that downloaded from the site and i have installed this..is there is anything lik purchasing of port then only this will work like that am having 13 seater centre i wanna acess this dialler in all system...can any one help me with step by step instructions....

[gmcust3]

Above settings works.

May be your VOIP provider is NOT allowing G711 CODECs and you dont have G729 Codec by default installed in the dialer.

We do Free Config of the Dialer , if you use Our VOIP.

[be.jeevi]

how to check the codec is enabled r not can u help me with this& if i configure the vicidial server ip with my soft phone xlite calls are connected but call r not connected in eye beam....and can u give me ur contact number &where u located....

[gmcust3]

What yr CLI says when u dial from eyebeam ?

[be.jeevi]

sorry yaar actually the call is not connected with the x lite also.....i dono wat to do with this...can u tell me ur contact number i can get voip mins from u itself...

[gmcust3]

Kindly PM me your chat id.

[be.jeevi]

where u located

[Kangkong]

PM me

[TheCubanRefugee]

This is where I've made it so far with reading what you have posted. I even tried modifying one of the Carriers in the list with my info and it doesn't seem to be working ==
Account Entry
[carrier]
host=

type=peer
disallow=all
allow=ulaw
allow=alaw
qualify=no
context=
port=5060
dtmfmode=
I don't know if im doing this correct but i need help asap as im trying to open the company by monday ! please Help As Soon As Possible

[striker]

Let us know more about your setup.

is your voip trunk is user based or IP authentication.
did they provided username , password and host ip to register?

check the below link under carrier tab
http://goautodial.org/projects/goautodi ... rted_Guide

[gardo]

Download and install the latest GoAutoDial ISO (v3.0 RC1a) from our website http://goautodial.org. You can easily setup your carrier using our VoIP services (JustGoVoIP). It's wizard based so it's automatic. If you need to use a different carrier, you can just copy the settings from the carrier entry.

This is where I've made it so far with reading what you have posted. I even tried modifying one of the Carriers in the list with my info and it doesn't seem to be working ==
Account Entry
[carrier]
host=

type=peer
disallow=all
allow=ulaw
allow=alaw
qualify=no
context=
port=5060
dtmfmode=
I don't know if im doing this correct but i need help asap as im trying to open the company by monday ! please Help As Soon As Possible